AutoCad :: How To Print Image In Big Page Such As 24 X 24 Inches
Sep 27, 2013
i am using autocad 2014 when i am try to print the image in big page such as 24 X 24 inches my image will scatter, the curve lines are look like zig zag lines and texts are faded, how to increase the resolution of the image so that i can print it in large paper.my printer is not connected to my computer that's why i have to convert the drawing to jpeg image, and my resolution become very low to print in big size paper.
View 1 Replies
ADVERTISEMENT
Apr 11, 2012
Can LR 4 display the image (document) size in inches? The only metadate I can locate provides this in pixels, My current solution is to open in Photoshop then to Image-Image size-document size. .
View 2 Replies
View Related
Aug 3, 2013
im trying to make a simple rectangle thats 9" long and 1/2 " high. and when i set it up in autocad it will not print out that size not sure if im doing something wrong in the units settings or in the plot. farly new to the auto cad program
View 4 Replies
View Related
Jul 17, 2013
Haven't had this issue until today (after I installed the recent patches)
I created an image 3.004" x 2.0"
I go to print, select my plotter, select print range "selection", go to preferences>advanced, set my paper size to PostScript Custom Page Size, make my paper 3.05x2.05 for a little extra boarder. Back in Print I set my Layout to Preposition to Center of Page which un-greys the position options and now it tells me my image size is 5.1"x2.0 and the Print Preview is showing the center of the image beginning at the left edge of the page...
Mind you, this is the same style of setup I've done numerous times per day for the past 5 years with x6 and x4...magically today it does not center my select graphic to the center of the page. If I put the graphic in the middle of the workpage and tell it to position as in document, it is not an issue, but if the graphic is else where on the workpage, it refuses to center..
View 6 Replies
View Related
Jan 30, 2013
Is there a way to save or default my page options...
Page options are set to "cm"
I want "inches".
View 5 Replies
View Related
Jul 3, 2013
I am using LR5 and am trying to print a single image using print package in the centre of the page, equal borders on all 4 sides.
View 2 Replies
View Related
Oct 30, 2011
I want to create a image file with six passport photos on a 4x6 photo print page. To do that I was asked to do the following:
take a photo yourself, crop it down to a 2x2 square, then copy and paste this into a 2 by 3 tile pattern (4x6 in. canvas size). You now have them print out a 4x6 photo
I don't know how to "tile pattern"
How can I do this in Paint.net
Attached Thumbnails
View 5 Replies
View Related
Feb 23, 2013
I am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around.
View 2 Replies
View Related
Feb 10, 2013
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
View 10 Replies
View Related
Mar 14, 2014
After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies
View Related
Mar 20, 2013
Out of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies
View Related
Oct 14, 2013
I am completely new to gimp I have an image that is 8in x 6in. It was previously edited in Photoshop on another computer thats how I know the actual size. When I load it into gimp, the image size is in real life the same, I can take a ruler to the screen and it measures 8in x 6in at 100% zoom. However, according to gimps rulers, the image is over 11in x 7in. So I measured what is one inch on gimps ruler and it is actually 3/8in in real life. When I create a grid to overlay the image, through Filters-Render-Patterns-Grid and I make the settings to be 1in x 1in, it too shows up based on gimps ruler measurements. I have the ruler set up in inches but a gimp inch is not a real life inch, and this shows up when I scale the image to 8in x 6in it actually makes the image 5 1/2in x 3 3/4in in real life when printed out. How can I get gimp to display a real life inch and how can I get my images to print out based on real life inches.
View 3 Replies
View Related
Feb 26, 2013
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies
View Related
Sep 9, 2012
In the Develop module, the size of my image is 4928 x 3280. How can I calculate the size of this image?
View 2 Replies
View Related
Jul 3, 2013
I'm trying to print a 2D drawing but I would like to add the 3D solid for viewing reference. I can't seem to "flip/rotate" my 3D solid to obtain an isometric view while looking at my 2D drawing from the top view.
how I can get both items to print on a single plot?
View 6 Replies
View Related
Oct 30, 2013
I am trying to create a border around my drawings but I'm not sure how to start. I create A3 progress drawings on a muck shift site, they are very basic but serve the purpose they have to. I would like to insert a page border to appear 10mm inside the perimeter of the page to improve the appearance.
View 2 Replies
View Related
Jul 11, 2013
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
View 3 Replies
View Related
May 27, 2011
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
View 1 Replies
View Related
Sep 4, 2013
I am trying to plot somelthing with a transparent hatch. I set the hatch to transparent, shows up fine in model space. I go to plot (either to paper or pdf doesn't matter) in the plot setting I check "Plot Transparency" print preview shows everything fine. When I print I get a blank page.
View 5 Replies
View Related
Sep 27, 2013
I print the file and it looks like the View Cube and Navigation Bar print on the page. I print it a second time and I don't see it.
View 5 Replies
View Related
Oct 18, 2012
When I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies
View Related
May 8, 2012
how to create page setups for multiple printers in a network environment?
Here is the problem:
We have 2 offices with 3-7 printers per office and each printer with different capabilities (black and white, color, 11x17, wide format, etc.). I have CAD users who know little about setting up layouts so I want to create preconfigured layouts that they can import from a template via Design Center or other means.
I know I could set up a layout for each printer, page size, plot scale, and plot style table, but that gets to be so many layout permutations that it becomes overwhelming to manage and use. Up until now I had set up PC3 files for a few commonly used printers (wide format plotter, laser, pdf) and gave them generic names with the intent that I could simply direct the output to any printer by assigning it to one of the generic PC3 files. The problem I've encountered is that over time we've acquired new printers and old printers sometimes go offline or out of service and many of the printers have incompatible printable areas and page sizes to each other, so for example a page setup that calls for an 11x17 sheet for one printer does not have an equivalent size when a different printer is assigned to the layout.
Are we stuck with having to configure setups for each and every printer and permutation?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 1 Replies
View Related
Oct 17, 2012
I enlarged a photochrom image (which gimp converted to rgb) to twice its original size, but when I wanted to see its dimensions in inches the image scale showed 6.667 x 4.887, which is half the original size. This can’t be possible, the enlarged image is quite big. I set the resolution at 300, if that makes a difference…
View 5 Replies
View Related
Mar 7, 2014
How do I set inches as the default unit for image resize, in Elements 12?
View 2 Replies
View Related
Nov 3, 2011
Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
View 2 Replies
View Related
Jul 22, 2011
I used to use a really nice VBA routine for assigning a page setup to multiple layouts, but now I need something that will work for 2011 and up.
View 1 Replies
View Related
Nov 8, 2003
I get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies
View Related
Sep 24, 2013
Copied the printer configuration (pc3 and pmp) from AutoCAD 2013 to AutoCAD 2012. Plot the same drawing with that same printer configuration. With AutoCAD 2013, it plots out fine - page orientation landscape. In 2012, it plots out wrong. The orientation of the drawing is correct, but the paper is changed to portrait?
The plot setting are exactly the same in both versions.
View 3 Replies
View Related
Feb 24, 2012
I want to re size them based on document sized in 'inches' to be set by resolution say for example: If the width or height is less than 4.72 inch the image resolution should be 150dpi; if the width or height is less than 1.33 inch the image resolution should be 300dpi; and the last one if the width or height is greater than 4.72 inch the image resolution should be 75dpi.
View 2 Replies
View Related
Jun 16, 2011
I use Sheet Set Manager to create and output sheets. Typically I will setup the pages to 24x36 and set to output to our HP.
If I want to output to 11x17 pdf, I use a page setup override and it works fine.
What I would like to be able to do is add a watermark -- using transparent text -- that says "Not to Scale" across the print when I use the page setup override.
View 1 Replies
View Related
Mar 15, 2011
Printing pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...
View 3 Replies
View Related
