While i am using Join Command, I Could not able to select all polylines and also could not able to make those are join together (which those are touching at one point).
How to do the above funtion?
I Wonder if it's possible, with a setting or something like this, to make the join command work only on lines or polylines that had the same linetype?
View 3 Replies View Relatedwhy I cannot join the various polylines in the attached example? My objective is to create 2 closed polylines, Line 1 and Line 2.
View 1 Replies View RelatedThe command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
Just can´t find out how to join these 4 polylines:
Bank.dwg
I would like to know how to make something like what I attach below.Its a circle with radius 112, touching a point on the corner, and the circle must touch some point on the line above precisely.
View 5 Replies View RelatedI've been looking to download a lisp that can trim (TR) and the (PE, join) polylines. two at a time or multiple... I've tried writing the lisp routine but I cannot do it correctly.. Any good lisp routine? Also, if there's one to trim & fillet w/a radius.. Hopefully there's two different routines but if there's one then even better...
View 6 Replies View RelatedI drew a cube using polylines by changing ucs. I want to join the polylines so that the cube contour becomes one single object.
Since the lines are in different planes I can not join them. How could I unite those 12 lines so they become a cube non solid(I plan on placing a sphere inside some of the cubes and then use "shade" for visualization so if the cube is solid I won't see the spheres).
Is it possible to create jon between point feature and polygon feature which is not attribute based, but only geometry based.When point is inside polygon can I create automatic join between point and polygon so I can use joined attribute data table.
I know i can create "object data records" links between enclosed text and polyline but i want to do same thing using SDF format points and polygons. Can it be done without converting point feature label to text and polygon to polyline and then creating automatic links and then again converting polylines with object data to SDF format.
I have two different assemblies, one has a normal batter slope to a table drain or embankment and the other is a kerb and channel. Refer attached.
When you apply these two assemblies in a joining regions, I get both assemblies at the same point, which causes the corridor surfaces to incorrectly triangulate.
"Join" option in "Loft" command.
View 2 Replies View RelatedI'd like to know how can i join these objects. I'm trying to use PEDIT command but no success. The objects are not touching so it's not possible?
How can i join two objects that aren't touching each other
OBJECTS.jpg
If you are drawing a polyline....and (in looking at my pic) draw from point A to point B an then back up to point C, is there a way to merge the poly so that it only goes from point A to point B?
View 9 Replies View RelatedI have all of my data in an Oracle database (Gas Enterprise Model). I need to join the pipe (Line) with the meter (point) in order to have the attributes of both for a report.
A query on geometry in Oracle definitely did not work and doing an overlay analysis in Map3D strips the attribute data when I create a buffer. There is nothing to join on for the tables, A Network analysis will not work because the lines are for services and don't have their connected distribution.
Do you need to use the join command on an object before making it into a dynamic block? I have these stairs I need to scale down to fit my floorplan, but when I place grips on it in order to scale them down, I can only scale of the block while the rest becomes totally distorted.
View 3 Replies View RelatedI'm using Autocad 2012 LT. Start a new drawing, in model space create 2 viewports, draw a closed polyline (rectangle), and then issue the hide command. The polyline vanishes !!! Turning it into a block solves the error. And hatches vanish as well.
View 9 Replies View RelatedIn Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedI'm trying to draw a plan of my house in Autocad 2009 but I seem to be endlessly using trim and extend because I can't easily select the points that I want with osnap. Eg. imagine I have a box, and I want to start drawing another box inside it that has each side as 10 units smaller than the corresponding side on the outer box.
Step 1 - I draw a small line from the top left corner of the big box using the endpoint snap, typing in "5" for the length.
Step 2 - I then do the same at right angles to the first line to get me to the starting point of the inner box. This always leaves me with 2 small lines to remember to delete.
Step 3 - Then in order to draw the top line of the inner box I end up drawing to a random length because I can't say "draw until 5 units away from the right hand side of the big box", then I end up trimming it later once I've repeated steps 1,2 and 3 for the next side of the inner box.
I know in my example above I could have scaled the box down or something but that's not what I'm getting at. I really want a way of selecting line start and end points that are a known position away from an existing point.
I wonder if there is a way to get an intersecting point coordinate of two polylines(lines) programmatically.
For example, like in the below sample picture, I need to get coordinates of the points in the red cycles.
Is there any method that I can easily use?
Could I get a sample code snippet that computes the coordinates? (in C# & ObjectARX 2010 if possible?)
I've looked up "Through the Interface" and this disscussion group. couldn't find any useful yet.
what is the difference btwn using the join icon and joining lines using the pedit command?
View 5 Replies View RelatedI have polylines that when selected, under properties it lists Object Data for the selected polyline. There are like 10 categories. This drawing is actually creeks in a county and they have object data connected to them where some are "a" some are "b" classification and I want to select all of the "a" polylines and put on a diffrent layer.
View 1 Replies View RelatedIn 2007, I was able to select multiple polylines before typeing in PEDIT. When I was done with the command, I could then type in PEDIT and L for last and it would select the multiple polylines I had first selected. We just got 2012, and when I do L now it just selects one line. Can I change this?
View 7 Replies View RelatedI need to wright a routine in autolisp that selects all 3Dpolylines with the same vertex Z value.Qselect as no transparent mode and filter doesn't work.
View 7 Replies View Related kept getting the following error when I try to join two end points.
To join, you must select two open endpoints. If they are not on the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group.
Here's what I have. Both paths are in the same group. I zoom to max and both ends are on top of each other. So, why am I kept getting this error message when trying to join them? I tried to Average and there is no error but yet the path is not closed.
I'm currently having diffulties editing my selections, specifically lines, hatching etc through the properties command. When I select a polyline or hatch and then select properties it shows that there is no selection. However if I select text I can edit the text style, but I can't change the colour. I've tried to change back to the default settings but that hasn't work.
View 6 Replies View RelatedI have a cheap mouse and quite frequently while using the free select tool, one click will result in Gimp automatically connecting the current points to the beginning of the path. my mouse is to blame and I experience mouse issues in other programs too... mainly one click will result in double click actions.
so I was wonder how/if I can turn off the feature where double clicking would connect the path of the free select because I kinda have to refrain from using the free select tool because I don't get very far before it connects itself to the beginning.
I work with shapes all day designing mobile apps. Thus, I'm constantly selecting and resizing rounded rectangles. When resizing I have to individually select all four points of a side to move it without distorting the rounded corners. I cannot click and drag, because that will activate any shapes underneath the one I want to select.
I'm looking for a plugin or alternative to easily select the entire side of a rounded rectangle. IE - I click one point on a side, and it auto selects all four points on that side, or the like.
Drawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
How to draw 3D polylines, or convert single lines to polylines?
this.JPG
I'm trying to select all objects at a particular point, but using .SelectAtPoint appears to only return one entity, even though multiple lines are connected to the point.
Sub getSelection() Dim selection As AcadEntity Dim selPt As Variant ThisDrawing.Utility.GetEntity selection, selPt, "Select a segment..." Dim selStart As Variant selStart = selection.StartPoint Dim connSetStart As AcadSelectionSet Set connSetStart = ThisDrawing.SelectionSets.Add("ConnToStart") connSetStart.SelectAtPoint selStart Dim thing1 As Variant For Each thing1 In connSetStart Debug.Print "connSetStart: " & thing1.ObjectName Debug.Print "ID: " & thing1.ObjectID Next thing1 Debug.Print "#objs in startset: " & connSetStart.CountEnd Sub