I have a list of layers that need to be used for one of our projects but are not currently set up in any template file or anything (basically a hard copy of layer names) Is there a way of typing them up in Word or Notepad than importing them into ACAD. Im sure i can right a script that I can run at the beginning of a drawing that will create them.
View 9 RepliesWhen I manually add a new layout from a template, I do NOT get any extra layers, but when I use VB to do the same thing, I get extra layers.
In the original drawing, I have layers called "SHEET", "TEXT", and "VIEWPORT" (among other layers).
In the template where I get my new layout, I also have the same layer names ("SHEET", "TEXT", and "VIEWPORT").
After the new layout gets read in, I now have extra layers called "$0$SHEET", "$0$TEXT", and "$0$VIEWPORT". Why does this happen using VB, but not when I do it manually? Is there anything I can do to the code to change this? I understand the layer names are the same, but they're the same whether I do it manually or by code.
Public Function importLayout(ByVal templateFileName As String, ByVal templateLayoutName As String) As ObjectId Dim idLayout As ObjectId = ObjectId.Null Dim doc As Document = Application.DocumentManager.MdiActiveDocument Dim ed As Editor = doc.Editor Dim oLock As DocumentLock = doc.LockDocument() Dim
[Code]....
I'm in the process of creating 3D points (as an overlay) on some laser scanned data (using RiScan, it's just 3d dimensional data, with a northing, easting and RL) and unfortunately the only export option is to export to .dxf... Which is fine but when I export, the information has the point ID as the layer name.
I am aiming at getting this data into another program to analyse and it needs the point ID or name to be my annotation, as opposed to the layer.
So what I need is a way of converting the names of each individual points layer, to the point ID.
I have a client experiencing a layer manager dialog box issue - the layer names are disappearing... This is not happening all the time - and in different files.
I have attached an image below.
I have upgraded from LR4 to LR5. LR4 allowed duplictes to be imported - one a jepg the other same file name but raw (CR2). LR5 does not allow me to do this. Am I mistaken or am I over looking something?
View 1 Replies View RelatedI have a list of Layer Names in a text file. How can i check the Layer Names in the autocad drawing file with the list and log all the errors in a notepad.
View 2 Replies View RelatedI need to export 3dpolylines from C3D 2013 to an ERSI SHP file.
Using the mapexport command I’m able to do this, however, the lines in the shp file don’t retain the layer name and colours that are in the C3D file.
Do I need assign ‘object data’ (or something similar) to the 3D polylines before exporting the shp file.
I was just wondering if there is a proper or standardized format to the layer names you should use or if i should just use what works best to discribe what im drawing on the layer?
ive gotten bunch of drawings from engineers lately and they have all had differnt names for the layers
We have a client with very strict layer name standards for AutoCAD. I have created a .txt file for locating the Revit elements on the correct layers when converting to .dwg files. The problem is the new layers created in AutoCAD during the conversion include a "3D" prefix which we then have to go in and manually eliminate. Is there any way to avoid this, it totally disagrees with the client's naming standards?
View 4 Replies View RelatedI have 2000+ drawings that have either the layer state "LMAN_DWF" or "DWF". I want all of them to read "DWF" for scripting purposes. LSIP routine that will go into a drawing and change rename a layerstate if it is named incorreclty, but do nothing if it is named correctly?
Does Layer State "DWF" exist?
If Yes, skip file and move on to next file
If No, does Layer State "LMAN_DWF" exist?
if Yes Rename Layer State to "DWF"
If No, skip file and move to next file.
Or a LSIP routine that can simply dump a list of all drawings in a directory that contain "LMAN_DWF" as a layer state. I could then use that list to do a simple script to change the layer state names on those specific files.
We build our models in Sketchup. Export a 3d DWG and import that into Revit 2014 (through Conceptual mass). That way we can export sections etc from Revit.
The problem is that Revit sees the 3D DWG as a Mass, and therefore don export the layers we want to AutoCad.
Is there a way to "explode" the 3D DWG in Revit so it gets divided in to the layers we had before it was transformed into a Mass. So the layers follows the DWG export to Autocad?
I'm looking to change the way Gimp names the layers I create. I primarily use the application for 2D animation and would like to have the layer names be structured so that I don't have to change every one for each animation.
View 1 Replies View RelatedOk i am not exactly new to Ai but i can only do certain things. So i took a cource and i am just having a helluva time finding a simple section on that tut.
Panels like color swatches and graphic styles have 3 appearances. 1 is fully open, 2 is colapsed with icons and then there is collapsed with label names.
How do i get the layer names collapse?
How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need.
Are there any scripts to find and replace layer names?
There is an excellent script available for Photoshop which allows you to not only replace words in layer names, but also insert words as Prefixes, Suffixes and Sequential Numbers. The illustrator version of this script only allows sequential numbering: It doesn't offer find and replacing of words.
Ideally, it would be great if there was something that could do multiple find and replaces in one go:
(E.g.
You have layers like this Car, Dog, Bat
You enter: car(Option1), dog(Option2), Bat(Option3)
Your layers then become: Option1, Option2, Option3).
)
I'm looking to create a script to batch rename a number of artboards.
- I have 100 named layers.
- I have 100 artboards.
- I would like to rename the artboards to match the layer names.
- The layers are organized in the same descending orderas the artboards (ignoring the actual artboard names*).
- The topmost artboard (1 in the list) would be renamed "newspaper", the second artboard would be renamed "typewriter", the third artboard would be renamed "books", etc.
*in the example below the artboard named "Artboard 7" is actually the 6th artboard in list.
I have problem with layer comps' names. Always, when I close my ps file, names of layer comps in this files are changing. I see that after opening this file. I use photoshop CS5 Extended.
View 2 Replies View RelatedI am using this script to find and replace words in layers. (The script only targets particualr words, rather than the whole layer name).
I would like to make it so it targets selected layers only.
I have found this script which loops through selected layers only, but I am not sure how to add the find and replace layer name functioality.
It's a common practice when building layers to duplicate existing layers as a start. Additionally, it is good practice that layer names be meaningful.
Suppose I start with the following layer: layer 1
If I duplicate that layer, it seems reasonable I'd get: layer 2. Instead I get: layer 1 copy
Then if I duplicate again I get: layer 1 copy#1, even though this is copy #2.
I propose the following: An option be available whereby user is queried for name of any layer which is to be generated. This is easier than having to edit automatically generated layer names.If automatic layer names are to be generated, code first checks if previous layer name ends in a sequence of digits. If yes, then these digits are incremented as an integer until a unique layer name is generatedIf the layer name does not end in a sequence of digits, then "#1" is appended to the layer name, and the "1" incremented until a unique name is generated.
So with this algorithm:layer 1 would become layer 2 for a first copy, then layer 3 for a second copy, etc.background would become background#2 for a first copy, then background#3 for a second copy, etc.
The problem with using "copy" in the layer name is that it is probably only in the substantial minority of cases that the newly generated layer is destined to be a true copy, so the automatically generated layer name is very likely inappropriate. Better is to use a simpler, shorter name which applies in a greater fraction of the applications.
can you export layers with the layer names to separate jpeg files?
I have a photoshop psd file with many layers that I want to export to separate files with the new name of the files being the same as their layer name. I have the following programs:
Using Photoshop CS4?
Using Photoshop Elements 7?
Using Photoshop Elements 12 (Trial)
I need to create a truncated contour map based on data from a .asc file. I have connected the .asc file but there is no option for adding with query so I have brought the whole file in.
I then created a contour layer and added to map (all good so far) but when attempting to query this layer for my area of interest nothing appeared on screen.
I then did some manipulation of the sdf to create polylines at the contour elevation and tried to MAPTRIM but I stopped Civil 3D after having "not responding" for 15 minutes
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I have several .dwg files from an architect each with several hundred layers. I set up a Layer State in one drawing with just the layers I need. I want to use the same Layer State in the other drawings. I opened the Layer States Manager, selected my layer state, and clicked export, selected a location and closed the window.
I double checked in the file manager in Windows 7 that the .las file was where I had exported it. Then I opened the next .dwg, opened Layer States Manager, navigated to the file location and the .las file does not show up.
When I go back to the original drawing and click Import, the .las file is not visible either, but it is if I click Export.I am working on drawings on my hard drive not a network, and saving the .las file to my hard drive.
Can you import layers from a file other than the AutoCAD types, e.g. .dwg, .dwt etc? I have made a list of layers in Excel that I would like to import into AutoCAD without having to manually create each layer at a time (there are approx 150 layers).
View 2 Replies View RelatedI've got some Text Layers in my CS6 document.
In CS5, if I had Text Layers and changed the text on the layer (by double-clicking the "T" icon of the specific Layer in the Layers palette), the name of the Layer would change to reflect the new text I entered.
For some reason this behavior is gone in CS6. So, for example:
• I have a Text Layer with the word "Email" on my canvas. The Text Layer name also reads "Email".
• I double-click the "T" icon of the Email Layer to edit the text on canvas.
• I enter new text, "Contact". The text on canvas updates to "Contact", but the Layer Name remains "Email".
So, for accurate Layer names, I find myself having to change the text twice: once on the canvas, and then manually updating the Layer name as well. Is there an option or preference somewhere that I'm missing that would re-enable the behavior from CS5?
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
When importing an SVG file, I woould like the top level SVG groups to be imported as separate Illustrator layers. Instead, Illustrator creates a single default layer on importing teh SVG file, and adds the tree of groups under that layer.
View 2 Replies View Relatedwhile importing photos in Lightroom 4 they all are covered with a green layer even on the histogram. Could that have something to do with my configurations? Working with windows 7 prof.
View 1 Replies View RelatedIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI have a drawing with loads of images on it. All I want to do is print the image name so instead of a picture showing it should say "banana.jpg" or whatever the image name is.
I've tried unloading the images and plotting, but nothing happens.
When I have AutoCAD open and I want to open a previous .dwg I have named and saved, why doesn't the .dwg name appear on the .dwg name label after it's open? It just says drawing.1 or drawing.2.
View 3 Replies View RelatedI was wondering if it was possible to Enter into the Tag Name field something to force it to be default (similar to writing %F%N in the options section of the tag name). I am running something in the background that if tag name isn't specified it doesn't go to its default, therefore the tag name itself has to tell it to go to default.
View 1 Replies View Related