I have problem with layer comps' names. Always, when I close my ps file, names of layer comps in this files are changing. I see that after opening this file. I use photoshop CS5 Extended.
View 2 RepliesI'm looking to change the way Gimp names the layers I create. I primarily use the application for 2D animation and would like to have the layer names be structured so that I don't have to change every one for each animation.
View 1 Replies View RelatedI've only seen one thread that releates to this issue with no answer resolution. I have a reoccuring but where my layer comps display with elements moved into different positions from when I last saved the comp (all layer comps are set to save Visibility, Appaearance and Position).
This seems to always happen when I re-open a document, and frankly I'm getting sick of going back and fixing photoshop documents after I save all my comps to files. I can't imagine that this isn't a known issue or that others are not seeing the same thing.
Is there a PSD file viewer program that allows someone to toggle between Layer Comps so that one does not need the full blown Photoshop application to view layer comps in a Photoshop document or be limited to viewing only the default Layer Comp?
View 5 Replies View RelatedI am trying to Export Layer comps to file to make a pdf of a 38 page document. When try to export to jpg or png the files are too small, even on the highest setting.
When I try to export to tiff or psd, it doesn't flatten the files and gives me files just as large as the master file.
When I try to export to pdf it creates very large files, that do not seem high quality.
Are there any more options or perhaps an additional script for exporting layer comps to files?
I have about 50 files that need their layer comps deleted. I need a way to automate this. Is there a way?
View 1 Replies View Related I'm experiencing strange layer comps behaviors since Photoshop 13.0.2 update, on an existing .psd file. If some comps are correctly rendered, some others are not refreshed: layers visibility is not updated, workspace seems to be frozen, using for instance the magnifier tool to zoom in/out renders a completely white workspace, and moving then my mouse pointer above it only refreshes its lower half part (a little bit more actually). Moreover, Photoshop CPU consumption becomes quite high as long as I stay on such composition (around 50% CPU instead of 2% compared to working comps).
I've tried to disable GPU from Photoshop preferences, Machine is a mid-2010 17" MBP w/ i7@2.66. No problem with the same .psd file before upgrading to 13.0.2..
There is a bug in CS6 layer comps that does not save the appearance of layers which have had their layer style cleared.
Steps to recreate.
1. Create a black square in a new photoshop document.
2. Create a layer style on the black square and set the over layer color to red.
3. Create a layer comp and turn on "Appearance" tracking, then update the layer comp.
4. Clear the layer style for the square, it should now be black again.
5. Create a second layer comp also with "Appearance" tracking on, and update it.
6. Go back and forth between the layer comps, the layer should turn from red to black, and the layer style should disappear and reappear on the layer, in the layers panel.
7. Save and close the file.
8. Re-open the file
9. Go back and forth through the layer comps, both will show a red square. The layer style never gets cleared.
A lot of times I'll be working on multiple .psd files and as I'm moving between files I'll notice that all the layers & layer comps will disappear from their palette
[URL]
I can bring them back by doing something like clicking on the text tool and then clicking on a text item on the stage. It's annoying because it takes a couple of clicks for the palette(s) to redisplay.
Is this a bug or is there a setting in preferences that can control this?
I keep getting this error message (see below) whenever I try to make jpegs from my layer comps using File-->Scripts-->Layer Comps from Files. This error always comes up after Photoshop gets through 2 or 3 comps. I often have to select only a few layer comps at a time to get it to make jpegs. I recently upgraded to Photoshop CS6.
Here is the message I get:
Error: General Photoshop error occurred. This functionality may not be available in this version of Photoshop. The object “layer comp 2054478963” is not currently available.
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
I need to export 3dpolylines from C3D 2013 to an ERSI SHP file.
Using the mapexport command I’m able to do this, however, the lines in the shp file don’t retain the layer name and colours that are in the C3D file.
Do I need assign ‘object data’ (or something similar) to the 3D polylines before exporting the shp file.
I'm in the process of creating 3D points (as an overlay) on some laser scanned data (using RiScan, it's just 3d dimensional data, with a northing, easting and RL) and unfortunately the only export option is to export to .dxf... Which is fine but when I export, the information has the point ID as the layer name.
I am aiming at getting this data into another program to analyse and it needs the point ID or name to be my annotation, as opposed to the layer.
So what I need is a way of converting the names of each individual points layer, to the point ID.
I've been using Photoshop CS2 for several years to enhance my photographs, but just now have encountered something simple I cannot find out how to do. I have on the background layer a picture of a room interior with the exposure set mostly for the open window, but the rest of the room is very dark. On the only other layer, the upper one, I have the same shot exposed correctly for the room, which overexposes the window area. The upper and lower layers are perfectly superimposed, and the upper layer is at 100% opacity.
I have selected the window on the upper layer and want to change the selected area's opacity to blend properly with the window on the bottom layer without changing opacity of the rest of the layer. No matter what I do, changing opacity seems to affect only the entire layer, and I haven't figured out how to isolate the selected area for the opacity change.
I can cut the selection to reveal the darker window on the bottom layer, but this doesn't give me the flexibility I need to balance the two exposures. An opacity change would be ideal.
I have a client experiencing a layer manager dialog box issue - the layer names are disappearing... This is not happening all the time - and in different files.
I have attached an image below.
Is it possible to edit a block name? The alternate solution is to create a new block (door) to accurate describe sizing/ type and copy to and delete old blocks w/ innacurate names. Because of the high number of doors, the alternate solution would take much longer.
View 9 Replies View RelatedI've been given about 14 DWGs from another company all on different discs. Each DWG is a page to a set of Shop Drawings. All objects are in model space. I want to combine all of them into one drawing but every drawing has similar block names with different objects associated with the block and when I copy the objects from one drawing to antoher, the blocks morph into the exisiting block, if that makes sense. Just a poor initial set up.
Anyway, the solution to this, I have found, is to rename the blocks in each drawing to have room numbers on the ends, giving them unique names and avoiding the "morph" upon inserting. I have about 15 blocks per drawings to add -XX with XX being 01-14. Is there an easy way to modify them or do I need to do the RENAME command as many times as needed in each drawing?
So I managed to have a fatal two disk crash and almost lost half of my catalogue. Luckily, I recovered one of the drives, but it renamed all of my files. I was using original file names (dumb mistake), and it seems there is no way to recover them. In the future I will be using YYYYMMDD-HHMMSS to keep things recoverable.
So at the moment I have recovered and renamed the files along those lines (YYYYMMDD-HHMMSS). What I want to do is rename the links in the catalogue to match as the files have that exif data, and then I think I can recover the files. Of course, Lightroom is throwing up roadblocks. I'd like to recover the photos with their edits, so is there a way to rename the files in the catalogue to match my new files?
I'm using CS4. I have multiple layers of text and I want each one to have a different drop shadow effect. When I try to chnge the settings of one layer's shadow, all the layers change. Is there a way to stop this?
View 2 Replies View Relatedcan you export layers with the layer names to separate jpeg files?
I have a photoshop psd file with many layers that I want to export to separate files with the new name of the files being the same as their layer name. I have the following programs:
Using Photoshop CS4?
Using Photoshop Elements 7?
Using Photoshop Elements 12 (Trial)
We build our models in Sketchup. Export a 3d DWG and import that into Revit 2014 (through Conceptual mass). That way we can export sections etc from Revit.
The problem is that Revit sees the 3D DWG as a Mass, and therefore don export the layers we want to AutoCad.
Is there a way to "explode" the 3D DWG in Revit so it gets divided in to the layers we had before it was transformed into a Mass. So the layers follows the DWG export to Autocad?
I have a list of Layer Names in a text file. How can i check the Layer Names in the autocad drawing file with the list and log all the errors in a notepad.
View 2 Replies View RelatedI have a list of layers that need to be used for one of our projects but are not currently set up in any template file or anything (basically a hard copy of layer names) Is there a way of typing them up in Word or Notepad than importing them into ACAD. Im sure i can right a script that I can run at the beginning of a drawing that will create them.
View 9 Replies View RelatedOk i am not exactly new to Ai but i can only do certain things. So i took a cource and i am just having a helluva time finding a simple section on that tut.
Panels like color swatches and graphic styles have 3 appearances. 1 is fully open, 2 is colapsed with icons and then there is collapsed with label names.
How do i get the layer names collapse?
Is it possible in Lightroom to automatically append/prepend directory names in the file path into the file name itself? Example:
DirectoryA Sub-directoryB filename.jpg (original file name)
==>
DirectoryA Sub-directoryB DirectoryA_Sub-directoryB_filename.jpg (concatenated new file name)
If this is not natively possible within Lightroom, any plug-in that delivers this functionality?
I was just wondering if there is a proper or standardized format to the layer names you should use or if i should just use what works best to discribe what im drawing on the layer?
ive gotten bunch of drawings from engineers lately and they have all had differnt names for the layers
How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need.
Are there any scripts to find and replace layer names?
There is an excellent script available for Photoshop which allows you to not only replace words in layer names, but also insert words as Prefixes, Suffixes and Sequential Numbers. The illustrator version of this script only allows sequential numbering: It doesn't offer find and replacing of words.
Ideally, it would be great if there was something that could do multiple find and replaces in one go:
(E.g.
You have layers like this Car, Dog, Bat
You enter: car(Option1), dog(Option2), Bat(Option3)
Your layers then become: Option1, Option2, Option3).
)
I'm looking to create a script to batch rename a number of artboards.
- I have 100 named layers.
- I have 100 artboards.
- I would like to rename the artboards to match the layer names.
- The layers are organized in the same descending orderas the artboards (ignoring the actual artboard names*).
- The topmost artboard (1 in the list) would be renamed "newspaper", the second artboard would be renamed "typewriter", the third artboard would be renamed "books", etc.
*in the example below the artboard named "Artboard 7" is actually the 6th artboard in list.
I can no longer change the name of raw files when saving as JPEG. Software will convert to JPEG but only with the same file name. Previously saved files work fine.
View 1 Replies View Relatedi'm currently working on a new website with a friend, we are using Dropout to share the files, he's the coder, and i design. Im using a pc at the moment, and he's on a Mac, when i save my files, they are saved with capital letters, and to upload it in dreamweaver on a Mac they cant have capital letters. So my question is, is it possible to change the file name to .jpg instead of .JPG? And how do i do it?
View 2 Replies View Related