AutoCad :: How To Set Grid Spacing To Be Default
Nov 24, 2011
My grid X and Y spacing is 10 so I changed it to be 1 and click ok. The grid change and then I close the program. When I open Autocad, I have to change the grid spacing again because it's back to 10.
Also I try to save the drawing work. The saved one which is already change grid spacing, not have the problem. But open new one, I have to change it again.
View 3 Replies
ADVERTISEMENT
May 16, 2012
I always use the same 'Home Grid' settings for every project I work on, but can't find a way to save those settings so they'll be automatically loaded when max starts.I even looked through 3dsMax.ini and saw nothing related to grid settings in there.
View 2 Replies
View Related
Jan 18, 2012
Understanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
View 2 Replies
View Related
Jun 4, 2013
I learnt that grid spacing in Section Views/Cross Section Sheets is controlled by the Bottom Horizontal Axes minor tick intervals and Left Vertical Axes minor tick intervals in the Section View Style dialog box(see Capture). If this is true what, then, is the function of the grid spacing settings in the "Plot Are" Tab of "Group Plot Style" dialog box (see the other Capture).
View 2 Replies
View Related
Mar 23, 2013
I'd like to use a grid to snap a lot(!) of small images into a larger(!) one. That works alright.
Problem: the large image has places the small images need to be snapped into, but they are not spaced an integer number of pixels apart. So the grid slowly wanders off the places as I move over the sheet. The places are 127.5 pixels apart (alternately 127 and 128, I guess). I cannot scale the image up, because the image is already 2.7 GB in size and my computer cannot handle the quadrupled size.
Is there a way to make GIMP accept a non-integer width for grid spacing?
It is absolutely ok if GIMP alternately places the grid lines a pixel shorter and a pixel longer.
Edit: I'm using GIMP 2.6.11, could install another version.
View 2 Replies
View Related
Jul 25, 2013
I am designing a website for a developer. he asked for a 1140x960px document built on a grid that is divisable by 12. so thats 95 boxes across.
How do i change the the grid spacing to create this 12x12px grid?
View 1 Replies
View Related
Mar 23, 2012
adding a page baseline grid! I love it, but I have one problem with it. For example I set the baseline grid to 13 pt, i have text with line spacing specified to 13 pt. I right-click the paragraph text box and select "Align to baseline grid". Then the text surely is aligned to the grid, BUT the lines are spaced to every other line, instead of every line.
View 9 Replies
View Related
Jul 23, 2012
I am trying to convert the grid system from the default (i need to some how have the coordinates in scale with latitude and longitude as i am working for a maritime company that is drawing on the sea bed?
View 1 Replies
View Related
Jan 23, 2013
Preferences / Default Grid says the grid spacing is 48 pixels for both width and height.
Yet when I choose View / Show Grid I get lines spaced on 10 x 10 intervals.
What am I missing?
View 2 Replies
View Related
Jul 23, 2012
I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
View 5 Replies
View Related
Aug 15, 2012
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies
View Related
Nov 18, 2013
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
View 2 Replies
View Related
Feb 16, 2012
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies
View Related
Apr 25, 2013
When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
View 3 Replies
View Related
Sep 10, 2013
I'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
View 7 Replies
View Related
Aug 10, 2011
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
View 3 Replies
View Related
Aug 29, 2013
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies
View Related
Oct 18, 2011
I'm new in InDesign. How do I remove the purple grid that was already there when I made my document, WITHOUT removing ALL my grids?
View 5 Replies
View Related
Dec 2, 2012
I am using AC LT 2008.
When inputting Single Line Text or Multiple Line Text I want to reduce the space between characters.
I mean the space to the left and right of the characters.
I do not mean the space between the lines of characters.
In typography this is called kerning.
In MS Word this is known as condensing.
I am using Times New Roman as my font of choice.
View 7 Replies
View Related
Mar 7, 2012
Exactly what the topic title says. My goal is to draw a custom map with pinpoint accuracy compared to what I envision it as. So, I want to use a grid that I can fill in the individual sections of to create this image, and then remove the grid afterwards when I finish, or at least make it completely invisible.
Is there anyway to accomplish that?
View 5 Replies
View Related
Sep 21, 2011
When using MText, how does one change the spacing in between the letters?
Acad 2010
View 1 Replies
View Related
Mar 5, 2013
Look at the picture attached.
Why does this happen? Every time I open a file where I changed paragraph spacing it always gets back to its default value of x1,00.
View 6 Replies
View Related
May 9, 2012
How to evenly space objects between 2 lines. In this instance I am trying to space recessed lights across a ceiling. If I use the divide command and snap to the node the space between the wall and the first light will be greater than the space between the first and second light.
View 4 Replies
View Related
Aug 14, 2012
I was using arc aligned text and i can't seem to change the charter spacing. it is grayed out.
View 3 Replies
View Related
May 8, 2012
it's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies
View Related
Oct 31, 2012
How do I change spacing when I use "dimbreak" on a "mleader"?
View 2 Replies
View Related
Mar 5, 2013
Im trying to change my letter spacing in my style and I cant seem to figure out how to do it. The picture here is my Autocad 2012 on the left and on the right is what I get from another company. How can I change my style so the lettering is more spaced out like the one on the right? This is not just for the tolerance box. All my dimensions have a similar problem where the text is not spaced out.
Such as if I make a dimension, it says "R.125" where there is no space between the "R" and ".125"
View 9 Replies
View Related
Nov 9, 2012
Pattern component is great but sometimes I have to pattern the same part several times to different dimensions in the same direction. For example: I have a part that has to go the left 26', then again at 29" and then again at 37". Other than manuallly constraining this 3 different times I've had to Pattern Component the first one at 26", then change the 2nd one to Independent. Then Pattern component that one to the 29" dimension. Change that 2nd one to Independent and pattern component that one to 37". It saves a lot of time but if I have to increase the model they are going on I have to start all over. Is there a command or something that will do this? I understand that a pattern is equal lenghs so maybe I am looking at the wrong command for what I am needing to do.
View 2 Replies
View Related
Nov 14, 2011
im using IV 2011 RS, the spacing of my suffix is like double spaced it looks like 15 " and i want them to look like 15"
View 1 Replies
View Related
Sep 1, 2012
I just started working for a new employer as a 2012 AUTCAD Tech: they have only used old school DTEXT for everything (what a pain compared to multi-text "MTEXT").
Problem: I converted several single line Dtext to Mtext (.075 test height) paragraphs but can not achieve the same spacing they have been using (.225) because .025 is not an availalbe increment in the parapgrah & line spacing selection. Is there a way or a LISP that will allow me to add custom spacing choices to the Line/Paragraph spacing default list?
Then I can upgrade so much and work faster, yet maintain the standard spacing already set via snap grid settings.
View 5 Replies
View Related
Oct 1, 2013
I am in C3D 2012 and using Romans.shx for my text. When labeling an Arc, the degree symbol comes out too close to the following text/number. Is there any way to adjust the spacing on curved text. On a straight line it looks fine.
View 4 Replies
View Related