I'm running Autocad mechanical and I want to copy workspace settings from
<<ACADMPP>> to <<VANILLA>>. I am using a plugin that setsup like so,
"C:Program FilesAutodeskACADM 2011acad.exe" /b"C:Program FilesM.E.P.CAD, IncAutoCAD ARX90x64AlarmAlarmCAD90x64.scr"
and I'd really like to work "/p <<VANILLA>> " in there somewhere.
The goal is to use the 2D Drawing and Drafting workspace with this plugin.
difference between a customized workspace and a saved profile? What are the specific uses of each?
View 2 Replies View RelatedI'm trying to create / copy an existing workspace using c#
I couldn't find a direct way to just copy the existing workspace so I tried to add it's properties manually. The only trouble is I can't seem to cover all the settings here's what I have so far...
var userworkspace = new Workspace(cs, acadUser)
{
WorkspaceRibbonRoot = wsMaster.WorkspaceRibbonRoot,
WorkspaceQuickAccessToolbar = wsMaster.WorkspaceQuickAccessToolbar,
Name = acadUser
[Code] ....
Pretty basic I know, how can I get PartialCUI tabs, palettes, etc.. applied?
We just upgraded to AutoCad 2013 and Cadworx 2013. I have set up a workspace in AutoCad, how can I copy the same workspace to Cadworx. There has to be a easy way to do this.
View 1 Replies View RelatedWhen I first install My autocad Map 3D 2012 my workspace name are Planning and Analysis, 2D Drafting Workspace or Map Classic Workspace after I select reset button in option->Profiles tab My Workspace names are Drafting & Annotation, 3D Basic, 3d Modeling or AutoCAD classic. How do I get my profile to reset back Autocad Map 3d 2012?
View 1 Replies View RelatedI want to copy my named WORKSPACE to another computer.
These computers are not connected.
I'd have to copy to a CD.
Is there a keyboard shortcut to copy the entire project your working on into another project (as in another tab window).
View 3 Replies View Relatedwhere my custom workspace are stored. I want to copy several I created on my desktop to my laptop. Have looked extensively without success.
The ability to create customized work spaces and quickly jump between them was a major leap forward in PS. How the CS6 migration grabbed my workspace from CS5. Now I want to copy them to my laptop, too.
Is it possible to export a custom Workspace and then import it to another copy of AICS5? It would save a lot of time to be able to do this for each install of CS5 if we could swap and copy Workspaces rather than reinvent the wheel.
View 3 Replies View RelatedJust upgraded a user to Autodesk Building Design Suite Premium 2013 but AutoCad 2013 and AutoCad MEP 2013 are not saving settings.
On first use the crosshair is large and angled, not standard. If I run "Rest values to default" then the settings are standard until I either restart AutoCAD or open a drawing then have the same strange cross hair.
Have tried creating a new profile, setting it as default startup profile by altering the shortcut but no matter what settings are not saved and revert to strange cross hair once AutoCAD is re-opened or a drawing is opening.If logon to computer as a user without a roaming profile all works fine.
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies View RelatedI am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies View RelatedI am using Autocad 2008. I lost all my icons when opened a drawing after disconnected my workstation off my domain network and trying to use it locally in my local drive.
in order words, How can I copy my network/server profile into my local drive so that I can run Autocad from my local drive ?(My Autocad Software is loaded in my local drive).
is there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies View RelatedI have customized a standard user profile Sam in my win 764 XDP7 interface. (added buttons, etc)
Is it possible to export/save that interface and pull it into the program and use the interface when I "Run As Administrator"? Or do I need to just spend time rebuilding?
As a User, when I work with a web site file, I have to republish locally all pages every time I open the file. It does not remember where I stored my preview. I am hoping that by running as administrator that will no longer be necessary. (My website file built in XWD6 moved to XDP6 and moved to XDP7 ends in .xar not .web)
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedIm creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies View RelatedI have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedI have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View RelatedI am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
I want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.
Is there a way to copy these tools into another profile? Even if I over-right another palette?
The attached profile is a section from a solid. I would like to create a closed profile in order to extrude the shape into a solid. The polyline command and splinedit don't seem to do the trick.
View 9 Replies View RelatedWe have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
