AutoCAD .NET :: Create / Copy Existing Workspace
Mar 5, 2013
I'm trying to create / copy an existing workspace using c#
I couldn't find a direct way to just copy the existing workspace so I tried to add it's properties manually. The only trouble is I can't seem to cover all the settings here's what I have so far...
var userworkspace = new Workspace(cs, acadUser)
{
WorkspaceRibbonRoot = wsMaster.WorkspaceRibbonRoot,
WorkspaceQuickAccessToolbar = wsMaster.WorkspaceQuickAccessToolbar,
Name = acadUser
[Code] ....
Pretty basic I know, how can I get PartialCUI tabs, palettes, etc.. applied?
View 3 Replies
ADVERTISEMENT
Aug 29, 2011
There are two things in Autocad i can't figure out how to do effectively:
A) I want to create a copy of an existing layout, which i can do easily. However is there a way to make 30 copies without doing each one manually?
B) I have all my layouts set up the same way. Now i want to change all my 30 layouts in the page setup manager to print A4 instead of A3, and to print Landscape instead of Portrait.
Can these be done? Perhaps with some repeat scripts or something?
View 9 Replies
View Related
Sep 28, 2012
I'm trying to create an all new existing surface over existing ground. I have a TIN surface of the EG, and I have drawn overlay splines that describe the new surface, but how to go about creating that design surface.
It is a compound surface, open on one end and closed all around on the other, somewhat like a half of a football stadium, but with an irregular upper edge because I am needing to figure out cuts and fills to manipulate the EG into this new surface without costly major terraforming. There is about 40-50' vertical elevation between the "field" and the upper rim with a generally constant 7-10 deg. slope all around. I'm just at a loss to figure out how to approach this project, and am quite new to Civil 3D.
Civil3D 2013
MacBookPro 17 - 2.4GHz Intel QuadCore i7 (Late 2011 build)
Microsoft Windows 7 64bit
350GB Bootcamp volume
View 2 Replies
View Related
Dec 6, 2011
I'm running Autocad mechanical and I want to copy workspace settings from
<<ACADMPP>> to <<VANILLA>>. I am using a plugin that setsup like so,
"C:Program FilesAutodeskACADM 2011acad.exe" /b"C:Program FilesM.E.P.CAD, IncAutoCAD ARX90x64AlarmAlarmCAD90x64.scr"
and I'd really like to work "/p <<VANILLA>> " in there somewhere.
The goal is to use the 2D Drawing and Drafting workspace with this plugin.
View 2 Replies
View Related
Nov 26, 2012
We just upgraded to AutoCad 2013 and Cadworx 2013. I have set up a workspace in AutoCad, how can I copy the same workspace to Cadworx. There has to be a easy way to do this.
View 1 Replies
View Related
Jun 13, 2012
I want to copy my named WORKSPACE to another computer.
These computers are not connected.
I'd have to copy to a CD.
View 9 Replies
View Related
May 23, 2013
Is there a keyboard shortcut to copy the entire project your working on into another project (as in another tab window).
View 3 Replies
View Related
May 18, 2012
where my custom workspace are stored. I want to copy several I created on my desktop to my laptop. Have looked extensively without success.
The ability to create customized work spaces and quickly jump between them was a major leap forward in PS. How the CS6 migration grabbed my workspace from CS5. Now I want to copy them to my laptop, too.
View 4 Replies
View Related
May 16, 2013
I have a user who no longer has a pdf option when "saving copy as" in Inventor 2010. He sees a few other options but not pdf. I will get him to perform a fix and reboot?
View 9 Replies
View Related
Dec 13, 2011
Is there a way to scan or copy our existing rowhouse plans onto auto-cad?
the plans are completely finish so we do not need any changes. we simply want to be able to view these plans thru a cad format.
View 9 Replies
View Related
Jun 4, 2010
Is it possible to export a custom Workspace and then import it to another copy of AICS5? It would save a lot of time to be able to do this for each install of CS5 if we could swap and copy Workspaces rather than reinvent the wheel.
View 3 Replies
View Related
Jun 13, 2011
I'm trying to create (in 3D workspace), a 3D polyline which starts from the "ground" and goes up the Z axis for 45 units (meters for example), then, the polyline continues "up" but in a 45 degree inclination, and then it goes up further but still 45 degrees from the last segment.
I attached a picture of this to the post, the top line is the one I want to create, and the bottom one is what I get.
The thing is that the 3dpoly command doesn't let me set the line on the Z plane, unless I fix it in ortho mode, and even after I do the first segment that way, the next one stays fixed in either the Z plane or the XY plane, but not in the 45 degree between them that I want....
P.S. - when I click the 3d polyline command, there are no options in the command area, just "specify first point...." - is this what should appear?
View 9 Replies
View Related
Jun 25, 2012
Autodesk Inventor 2013 won't let me create a project. The specified workspace G:Design does not exist.
This can result in unexpected default file locations.
Do you want to create the workspace?
and when i hit OK
Fail to create workspace G:Design.
You may need to change it to other place
View 5 Replies
View Related
Jul 12, 2012
I have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
View 2 Replies
View Related
Sep 3, 2013
I've followed a few examples and am able to create a new tab on the Ribbon, with panels and buttons, that appears when my DLL is loaded. However, it doesn't persist through workspace changes. I've read that this is due to my use of AdWindows.dll and my current code, as opposed to AcCui.dll, which would modify a CUIx file (that I don't know much about) to make persistent changes.
Here is a sample of my current code.
public class Commands : Autodesk.AutoCAD.Runtime.IExtensionApplication{public void Initialize(){Application.Idle += callback_Idle;}private void callback_Idle(Object sender, EventArgs e){CreateRibbon();Application.Idle -= callback_Idle;}private void CreateRibbon(){RibbonControl mainAcadRibbon = ComponentManager.Ribbon;if (mainAcadRibbon != null){RibbonTab rTab = mainAcadRibbon.FindTab("Tab Name");if (rTab != null){mainAcadRibbon.Tabs.Remove(rTab);}rTab = new RibbonTab();rTab.Title = [code].......
View 5 Replies
View Related
Nov 5, 2012
I am having persistent problems and notbody is commenting on my questions. I see other people with similar problems and there have been no answers for that either.I am running windows 7, 64 bit i7 3.50ghz computer with 32 gigs ram, and a radeon 7850 graphics card... I have a wacom intuos three. all drivers have been updated Saturday and problems still persist.
LR4.2 crashes intermittently on first opening. I have posted the crash on two other threads but nobody has replied. ( I dont know how to paste the link.) how can I roll back to version 4.1 that worked? can i install over the existing copy?can i uninstall and reinstall without a hassle with registration numbers?
View 3 Replies
View Related
Apr 11, 2012
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies
View Related
May 1, 2011
I am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies
View Related
Sep 26, 2012
I have installed a new primary disc (C: in Windows 7 Pro) and re-downloaded LR4.2 release candidate. Can I simply copy the existing LR catalog (which I have on old disk, still accessible via USB, or from several backup copies) to the new disc and LR will work as it did previously. The drive letters of the locations of the actual image files (on other internal drives) have now changed so how do I tell LR to now use the new drive letter locations.
View 1 Replies
View Related
Jan 4, 2012
is there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies
View Related
May 25, 2012
I'm trying to create an illustrator action that isn't functioning properly on playback. I'm using Illustrator CS5 on a Macbook. In setting up for print production of CD's and DVD's, on what's called an OMAP; I have to copy, paste and then place the image at a specific point on the artboard. Then I repeat 143 times. I'd like to create an action that pastes and moves each of the 144 disc images to the precise x and y coordinates given. I've tried creating this action through the steps outlined below, but the result of the playback is never consistent and the images end up off the artboard.
1. Copy disc image from an existing illustrator file.
2. In the action panel of my OMAP template document I create a new action, give it a name and click Record.
3. I hit command>V to paste.
4. In the transform panel I put in the x and y coordinates(Then repeat)
Update: I was able to create the action in Illustrator CS4 and playback works perfect. However, my client uses Illustrator CS 5 on a PC (as I use most of the time); and, the action will not play back properly in CS 5. I've updated both mine and their software to the latest version of CS 5 (illustrator 15.0.2 i believe) and this action still will not function right. I've tried re-creating the action in CS 5 with no success on playback. URL...
View 6 Replies
View Related
Jan 5, 2014
How do I copy the list of keywords in an existing LR catalog to a new LR catalog?
View 2 Replies
View Related
Oct 25, 2012
I'd like to be to select a layer groups and copy them over to another pre-existing image.
I've been struggling with this for an hour or so, and I haven't found a way to do this.
Is is possible to do this in GIMP?
The closet I've found is a kind of paste where you do this: drag the tab of the origin image over to the tab of the target image. The result is a new layer in the target image called "dropped buffer". However, the entire origin image is imported flattened.
I've been trying other drag and drop operations, but without success. Usually when I drop the selection to the target image, the icon under the mouse dissapears, and nothing actually happens.
I thought this might be a window manager problem. But I get the same results across kde, gnome and xfce.
View 1 Replies
View Related
May 26, 2011
I need to create a new block based on a existing block(need the same shape), then overlay on top of the existing one.
1. create a new block based on the existing one. the existing block is solid but I need to give pattern to new one
2. overlay on top of the existing one
I new how to create a block generally, but doesn't know how to create based on an existing one.
View 1 Replies
View Related
Jul 5, 2013
Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
View 15 Replies
View Related
Aug 3, 2012
How do I create a new pointer using two existing pointers. I would like to create a pointer that combines the default arrow and the integral.
View 9 Replies
View Related
Dec 16, 2011
I want to create a dynamic block from existing geometry using C#.
View 1 Replies
View Related
Jul 22, 2013
civil3d 2012. I'm trying to find out how to create cross sections from existing ones that i have in autocad file. I allready have read for the way with offsets points, but is there a way to make full cross sections from the allready drawned?Is it possible to convert the existing lines?
View 7 Replies
View Related
Aug 4, 2012
I try to create existing road cross section in civil3d only with offset and elevation.
View 4 Replies
View Related
Apr 24, 2012
I'm attempting to create a sheet set from existing drawings, but when I point the "New Sheet Set Wizard" to the folder containing my 8 or so drawings (with 24 or so associated layouts), only 2 drawings appear with 6 associated layouts for import. The other layouts don't even show up as being part of another sheet set. How do I get the New Sheet Set Wizard to "see" the layouts?
View 4 Replies
View Related
Mar 29, 2013
Using VB.NET, how to create a new polyline out of existing lines and arcs? I am converting existing VBA code into VB.NET, developing in AutoCAD 2010 using VS Professional and I just stumbled into this road block.
Without using programming code, this task can be accomplished via AutoCAD command by typing the PE command, selecting the JOIN option and then selecting any lines or arcs which should be combined to form a polyline.
Using programming code, however, I am quite stumped on this task. I have been able to successfully create the lines and arcs which should form the polyline, and they are all connected as well so they would form a connected polyline; I simply do not know how to proceed from here.
View 6 Replies
View Related
