AutoCad 3D :: Create (in 3D Workspace) 3D Polyline
Jun 13, 2011
I'm trying to create (in 3D workspace), a 3D polyline which starts from the "ground" and goes up the Z axis for 45 units (meters for example), then, the polyline continues "up" but in a 45 degree inclination, and then it goes up further but still 45 degrees from the last segment.
I attached a picture of this to the post, the top line is the one I want to create, and the bottom one is what I get.
The thing is that the 3dpoly command doesn't let me set the line on the Z plane, unless I fix it in ortho mode, and even after I do the first segment that way, the next one stays fixed in either the Z plane or the XY plane, but not in the 45 degree between them that I want....
P.S. - when I click the 3d polyline command, there are no options in the command area, just "specify first point...." - is this what should appear?
View 9 Replies
ADVERTISEMENT
Mar 5, 2013
I'm trying to create / copy an existing workspace using c#
I couldn't find a direct way to just copy the existing workspace so I tried to add it's properties manually. The only trouble is I can't seem to cover all the settings here's what I have so far...
var userworkspace = new Workspace(cs, acadUser)
{
WorkspaceRibbonRoot = wsMaster.WorkspaceRibbonRoot,
WorkspaceQuickAccessToolbar = wsMaster.WorkspaceQuickAccessToolbar,
Name = acadUser
[Code] ....
Pretty basic I know, how can I get PartialCUI tabs, palettes, etc.. applied?
View 3 Replies
View Related
Jun 25, 2012
Autodesk Inventor 2013 won't let me create a project. The specified workspace G:Design does not exist.
This can result in unexpected default file locations.
Do you want to create the workspace?
and when i hit OK
Fail to create workspace G:Design.
You may need to change it to other place
View 5 Replies
View Related
Sep 3, 2013
I've followed a few examples and am able to create a new tab on the Ribbon, with panels and buttons, that appears when my DLL is loaded. However, it doesn't persist through workspace changes. I've read that this is due to my use of AdWindows.dll and my current code, as opposed to AcCui.dll, which would modify a CUIx file (that I don't know much about) to make persistent changes.
Here is a sample of my current code.
public class Commands : Autodesk.AutoCAD.Runtime.IExtensionApplication{public void Initialize(){Application.Idle += callback_Idle;}private void callback_Idle(Object sender, EventArgs e){CreateRibbon();Application.Idle -= callback_Idle;}private void CreateRibbon(){RibbonControl mainAcadRibbon = ComponentManager.Ribbon;if (mainAcadRibbon != null){RibbonTab rTab = mainAcadRibbon.FindTab("Tab Name");if (rTab != null){mainAcadRibbon.Tabs.Remove(rTab);}rTab = new RibbonTab();rTab.Title = [code].......
View 5 Replies
View Related
Jun 13, 2013
As part of a larger job we have surveyed the top of a dry stone wall. The client now wants that we make a solid for him from the surveyed points with a height of 2000mm (the drawing units are in millimetres).
A 3d polyline was created from the lines joining the points and I have that in the attached drawing.
I'm not looking for someone to create the wall, but I'm looking for the method to do it, as it will certainly crop up again with this new client. I've tried many ways in both AutoCAD and Civil 3D but just can't create the solid.
View 9 Replies
View Related
Jul 17, 2011
I'm currently trying to use the draw > point > measure tool to create a set of points around a polyline but I can't seem to get them to start at a point that I want. When I try and create the points they start from a random place.
View 3 Replies
View Related
Apr 11, 2012
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies
View Related
May 1, 2011
I am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies
View Related
Feb 11, 2012
I'm trying to create a Solid 3d that is the extrusion solid af a closed polyline by a given height
I select the polyline that i do this
Solid3d s = new Solid3d();
s.CreateExtrudedSolid(selectedPolyline, new Vector3d(0, 0, 20), new SweepOptions());
but Autocad throw an Invalid Input exception.
View 4 Replies
View Related
Aug 14, 2013
I want to create points from the polyline to identify in the field. For example, I create a square for a concrete pad and I want to identify the corners of the pad.
View 4 Replies
View Related
Nov 5, 2012
i'm looking for polyline lisp. I type PLINE and type Width specify starting width is 0.0 next specify ending width is 90.0 and then i type 200mm for my distance then i choose again the Width to become 0.0 (starting and ending) then choose Arc. How to create lisp polyline?
View 1 Replies
View Related
Apr 16, 2012
Any way to create a polyline linetype that simulates a solid dashed with outer lines (drainage line)?
I could sort of do it with the multiline feature but not what we want. using 2011 civil3D
View 2 Replies
View Related
Jun 21, 2011
if it's possible to create a polyline with invisible segment.
View 4 Replies
View Related
Jan 31, 2014
How to create a minimal DXF file that has polyline. I am using a C# program to create DXF File. Also if i want to hatch a closed polyline what might be the best way.
View 9 Replies
View Related
Jan 4, 2012
is there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies
View Related
Mar 13, 2012
I've been going through some examples on [URL] to create polylines and i've managed to make some code run. One thing that I can't seem to find information on though, is how to use the default AutoCAD command line options in my code. For instance, I would like to be able to prompt the user whether they would like to snap the polyline to an insertion point, everytime they create a new verticie.
Below is some example code from the site that i'm working from:
namespace MyPlineApp
{
public class MyPlineCmds
[Code].....
View 6 Replies
View Related
May 16, 2013
How do I go about extruding an open polyline to create a surface? I am able to extrude a solid 3d from a closed polyline ( by creating a region first) but I cant find a way to do the same for surfaces.The autodesk.autocad.databaseservices.Surface class does not have an extrude method unlike the its solid3d equivalent. I am using autocad 2012 .
View 1 Replies
View Related
Aug 23, 2012
I want to create a command:
My selection set consists of dbpoints that exists on my drawing and they are more or less in line
I create a new point3dcollection with this db points
I want to create a 3d polyline based on this point3d collection
My problem is : how to sort this point3d collection based on a picked start point and picked end point?
The only idea I have is:
from start point i calculate the distance to each point3d from collection and based on the results i sort the point3d collection based on distances.
View 2 Replies
View Related
May 3, 2011
I want to create a 3d ployline from a 2d polyline with curves. When I use the convert 2d polyline to 3d polyline command it places a bunch of vertices along the curve so when I go to place elevations on the vertices it takes too long. I want to be able to give an elevation at the pc and pt and have it place elevations along the curve from this info like it does on the stright lines.
View 6 Replies
View Related
Jan 13, 2014
I have been sent a client's construction drawing for a care home where i need to design the sprinkler installation. The majority of the rooms have got the same head positions within them, but they have all got a slightly different angle as the building is shaped like a banana. Unfortunately its not a uniform radius that i can tell as the one side is larger than the other.
So my question is this. Normally, on a square building, I drop in construction lines along the bedrooms so that i know my sprinkler heads are all the same distance off a wall, and I only need to line up one side. However, with this building being a curve, and the wall angle being slightly different on each room, how do I place an angled construction line or polyline to act as my set out line for my heads.
View 9 Replies
View Related
Jan 28, 2012
is there a command (or method) that will create a polyline from selected cogo points instead of manually connected each point from a create line command?
View 2 Replies
View Related
Jun 8, 2013
I want to create jig to insert hallow slab (polyline) everything works fine until I am trying to use an added keyword for rotation then Autocad crashes really bad (no error information). Here is a code, in comment place where program crashes.
Ps: I've already been on through the interface and tried to use text jig but no result in my case
Imports SystemImports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.EditorInputNamespace AutoCAD_VB_plug_in1 Public Class [code]........
View 3 Replies
View Related
Nov 18, 2013
[URL]
You said that there is no need to flatten, but each method I have tried does not produce a polyline with curves.
I tried:
survfig.BaseCurve
survfig.BaseCurve.GetProjectedCurve
survig.BaseCurve.GetOrthoprojectedCurve
If if manually flatten the figure using a dummy suface with the AeccFeatureElevsFromSurf command, the polyline derived from survfig.BaseCurve will then have actual arc segments.
Is there another method or a way to flatten the figure programatically first?
View 8 Replies
View Related
Nov 24, 2013
I want to create new vertex points in feature line and 3dpol.
I have this:
try
{
if (obj.GetType() == typeof(Autodesk.AutoCAD.DatabaseServices.Polyline3d)) {
Polyline3d p3d = (Polyline3d)trans.GetObject(entRes.ObjectId, OpenMode.ForWrite);
[Code]....
In this code line:
oFtrLn.InsertFeaturePoint(punt, AeccLandFeatureLinePointType.aeccLandFeatureLinePointPI);
always catches the same Exception "the value is not within the expected range" .I have translated it because I get "El valor no está dentro del intervalo esperado". Perhaps is this: " Value does not fall within the expected range.".
I have tried it with different point3d values but always catches Exception.
With pol3d I have similar problem.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 4 Replies
View Related
Mar 29, 2013
Using VB.NET, how to create a new polyline out of existing lines and arcs? I am converting existing VBA code into VB.NET, developing in AutoCAD 2010 using VS Professional and I just stumbled into this road block.
Without using programming code, this task can be accomplished via AutoCAD command by typing the PE command, selecting the JOIN option and then selecting any lines or arcs which should be combined to form a polyline.
Using programming code, however, I am quite stumped on this task. I have been able to successfully create the lines and arcs which should form the polyline, and they are all connected as well so they would form a connected polyline; I simply do not know how to proceed from here.
View 6 Replies
View Related
Sep 9, 2013
I would like to create a construction geometry that would behave as the Polyline Bulge. In other worlds I would like to create a Construction Arc that would have a Bulge. Upon examination, I was not able to locate any of the Construction Geometry that has a bulge.
The purpose of this is to determine the Bulge location (direction) of the polyline I am creating.
I would like to stay away from creating a database geometry, if possible.
View 2 Replies
View Related
Jan 4, 2013
I have run into a little trouble in trying to figure out how to create a arc polyline with entmake. I've put together the following and it works great with command "pline". I just want to know how to do it with entmake.
(defun C:22 ()
(setq P1 (getpoint "
Specify first point: ")
P2 (getpoint P1 "
Specify next point: "))
[code].......
View 7 Replies
View Related
Jan 16, 2012
So, is it possible to create one polyline that has combined dashed and continuous type of line in one polyline?
View 9 Replies
View Related
Oct 9, 2013
I'm trying to look for a LISP command where i will create a closed polyline with 4 sides in different angles. then convert it to region.
View 6 Replies
View Related
Nov 6, 2013
Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies
View Related
Jun 7, 2012
I would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies
View Related
