AutoCad :: Forced Grid In DXF Format
Jan 8, 2014
I used a vectorising program (vectormagic) and I get a dxf format file. Now I am trying to edit it with Autocad (2011) mas it seems to exist a kind of grid with predefined dots and I can only start and finish a line in its intersections. I already tried the grid and ortho commands without success.
I am new with AutoCAD (I have plenty of experience with SolidWorks and Inventor). This is the link to the dwg file (saved by AutoCAD. Tomorrow I can upload the original dxf file) [URL] .......
View 6 Replies
ADVERTISEMENT
Nov 29, 2012
Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies
View Related
May 17, 2013
I made a construction with the frame generator from a single sketch.
I managed to select a handfull of framemembers an demote them to a new subassembly.
Now it turns up Grounded with the grounded options grayed out?
Do I have to delete it and replace it?
View 5 Replies
View Related
Aug 7, 2013
We are having this problem a lot recently with our projects.
I have a 125 page set and I just got into modify a sheet and the surface and profiles are gone. I force a sync using "synchronizereferences" and voila everything looks as it should. I purge and audit, save and close. I reopen it and once again the surface and profiles are gone.
We are using C3D 2013 with service pack 2 installed
View 4 Replies
View Related
Dec 5, 2008
I'm aware that Photoshop is not the best program for working with vector files. Because of the kind of work I'm doing, I need to open vector files (mostly EPS) in PS throughout the day and work on them using specific filters that I have.
In all previous versions of PS, when I opened a vector file there were no problems. The files opened exactly as they were saved. Since I upgraded to CS4, PS has started forcing a resolution of 72 dpi and CMYK mode when I know for a fact the file was created at 300 dpi and in RGB mode. I know it seems minor, but when you're working on 100 + files per day, it really cuts into your workflow.
View 3 Replies
View Related
Apr 25, 2013
When a mixed RGB/CMYK PDF is opened in Illustrator CS6, Illustrator forces a conversion to one color space or the other. See this screenshot: [URL]
I assume this is a limitation of Illustrator and there's no way to keep both color spaces. Under that assumption, Is it possible to choose the profiles used for the conversion from RGB to CMYK? Can Illustrator be made to use the RGB and CMYK profiles defined in its Color Settings to make this conversion?
View 8 Replies
View Related
Oct 30, 2012
Installed Elements 10 today. When browsing for a destination folder for very first project a "Serious Error" message box is displayed and program forced to shut down. What is this and how do I fix??
View 1 Replies
View Related
Jul 23, 2012
I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
View 5 Replies
View Related
Aug 15, 2012
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies
View Related
Jan 18, 2012
Understanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
View 2 Replies
View Related
Nov 18, 2013
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
View 2 Replies
View Related
Sep 25, 2013
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 9 Replies
View Related
Sep 13, 2012
We have a computer that using AutoCAD Architecture 2013 and Acrobat 9 Standard. When printing a large sheet (30"x42") with images in it to a PDF the images do not appear in the newly created PDF. However, if the same file is printed to fit an 11x17 the images display correctly. Any thoughts as to why the large sheet size is not printing properly?
View 1 Replies
View Related
Feb 16, 2012
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies
View Related
Apr 25, 2013
When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
View 3 Replies
View Related
Sep 10, 2013
I'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
View 7 Replies
View Related
Aug 10, 2011
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
View 3 Replies
View Related
Aug 29, 2013
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies
View Related
Oct 18, 2011
I'm new in InDesign. How do I remove the purple grid that was already there when I made my document, WITHOUT removing ALL my grids?
View 5 Replies
View Related
Mar 7, 2012
Exactly what the topic title says. My goal is to draw a custom map with pinpoint accuracy compared to what I envision it as. So, I want to use a grid that I can fill in the individual sections of to create this image, and then remove the grid afterwards when I finish, or at least make it completely invisible.
Is there anyway to accomplish that?
View 5 Replies
View Related
Nov 11, 2012
How can you format or resize the photos as wide screen format so they will display in wide screen mode on Sony photo frame players?
View 1 Replies
View Related
Jun 4, 2013
I am working on a 3' x 10' banner with 300dpi in Photoshop and it takes all of my time to do the extra tools to do, and it takes 10 minutes to save it or more. I have powerbook and CS6 on me. I put the highest memory in Photoshop preference. So I am bearing to work with it for hours for one small assignment, but why does it takes so long? is there a better way to do to save time and speed to make the poster banner to look greater than life? even in 200 dpi?
View 10 Replies
View Related
Sep 12, 2007
I have an interior laid out on a scaled grid, and I want to print a copy that displays the grid (ie: visible on the printed page). But everything (& I mean everything) indicates that grids per definition NEVER print.
I also thought that I could create my own grid on a separate layer, but if that's an option, I can't find that either...
View 1 Replies
View Related
Jan 25, 2014
I was thinking of something like photoshop can do. Have like a 32x32 pixel grid, then within that 32x32 square a 1x1 pixel grid show up? Of course a different lin maybe dotted?
View 14 Replies
View Related
Aug 8, 2012
When I drag around vector points of paths they are not constrained to the pixel grid, when the option "Snap Vector Tools and Transform to Pixel Grid" is off. This is the behavior I expect.BUT: When I drag whole paths, they snap to the pixel grid, no matter what. I even have snapping completely disabled.
This is particularly annoying when eg. creating a path for a zipper. I first make a path for the inside of the jacket or whatever, then I make one notch for the zipper and copy it over and over again for all the notches. It's very troubling when these elements snap to the pixel grid, because it's very unprecise then.
View 1 Replies
View Related
Aug 17, 2012
The drawings I'm receiving from the architects are all set to the world coordinate system. So when it comes to setting out they coordinates are useless to me. So what I want to know is how can I rotate my drawing so it's aligned to my local grid?
View 9 Replies
View Related
Feb 14, 2011
I have Mechanical 2011 and like the Grid On when I work, personal preference I guess. I have the system variable GRIDMODE set to 1 and the template drawing that opens when AutoCAD starts saved with the grid lines on.
I know the grid state is saved in the drawing but is there a way to have the grid always on regardless of the drawing, many drawings I work with are from outside of my organization.
View 9 Replies
View Related
Nov 21, 2013
When I create a grid from our OSIP DEM files the contours come in as a block. I usually do 1' and 5' contours. I would like to break these so that when I select a 1' contour it will show up individually with elevation data still attached. If you select one now, it selects the entire grid. If you explode it, you lose the grid file. Is there a way to do this or will a just have to label the contours so I know where I am at?
View 8 Replies
View Related
May 15, 2012
We here at work have recently implemented using the survey database feature in CAD as a better way of manipulating and organizing points in our drawings. However, we have begun to notice a few issues with how the survey database imports points (?).
Sometimes, and I say sometimes because it is very sporratic, some drawings exhibit the issue and some do not, the points will be skewed off the linework (we are converting existing projects to the survey database). In these situations I find that the Northing and Easting don't match the ascii file it was imported from, instead the "Grid Northing" and "Grid Easting" do. Also, some drawings will have a slightly different Grid Northing and Grid Easting vs Northing and Easting, whereas some drawings will have the exact coordinates for both sets of fields. I believe the issue is one and same.
Our points handling goes like this, Data Collector--->TBC (where ground to grid and scaling is performed)---->exported to ascii file------>Imported to CAD.
This is very confusing and irritating at the same time, and really counterproductive to be troubleshooting why our points keep moving. Redrawing the linework is NOT an option, we'll sooner go back to simple ascii file imports (where the problem is NOT present) then have to redo all of our work on our projects.
View 9 Replies
View Related
Aug 19, 2011
I have been working with ADT 2012 for a month now, and I am missing the way that my crosshairs used to snap to a grid, even if a command is NOT active. If I am zoomed in close, I used to be able to have my pickbox/crosshairs snap to the 1" grid that I have set up. However, that I only works if I have a command like "LINE". What setting do I need to change to make this work the way it has for YEARS?
View 7 Replies
View Related
Dec 6, 2012
Now i am working on setting up the grid system for drawings . My task is after setting the grid label the possition of equipments od Data Center( e.g ups, panels) on drawing. I am able to set the grid but i don't know how to get my grid coordinate identifiers(x coordinates and y coordinates) which will label the equipments.
View 9 Replies
View Related
