Now i am working on setting up the grid system for drawings . My task is after setting the grid label the possition of equipments od Data Center( e.g ups, panels) on drawing. I am able to set the grid but i don't know how to get my grid coordinate identifiers(x coordinates and y coordinates) which will label the equipments.
View 9 RepliesWhen i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedApply the transformed utm coordinates to grid coordinates to a structure table. the point tables have a grid coordinate selection but the pipe structure table does not.
View 1 Replies View RelatedMy father in law is a civil engineer but works everything out on paper. I'm convinced there is a better way (using autocad). I'm competent with computers but never used autocad in my life and I'm not a civil engineer.Before starting setting out on site, he is given the proposed layout, based on 'National Grid Co-ordinates' (in the UK).
Currently he's working on a carpark which is a nice grid but on a different axis to the national grid coords. To make things easier, he picks a coordinate and labels it Easting 100.000 & Northing 100.000. From there he converts the coordinates given to values relative to this 100,100 coordinate. He does this on paper.
Could this be done using AutoCad (2011)?
I'm trying to define a grid based on polar coordinates.
Can be produced using the following MATLAB
n=1:50000;r=sqrt(n);t=360/((sqrt(5)+1)/2)+1)*pi/180*n;plot(r.*cos(t),r.*sin(t),'o')
I need to insert points based on the polar coordinates defined by the equations. I knew a little bit of LISP 10 Years ago, now it's a total blank. I've been trying to write a script to make this work but after 5 days I'm still without sucess.
That program by default showed (x,y) coordinates for pretty much any tool. This was really helpful when trying to get a circle around an object precisely. Is there a way to get this displayed in PS?
I am using PS CS (Premium Suite-Educational version).
There's a box, I've set it to 0,0 coords, but it will not stick to the top of the artboard. I've tried align to pixel grid on and off (It would not move off 0.318px when I had align pixel grid on, which confused me too!). When I turn align to pixel grid off the box stays closer to the top, BUT when I export for web it sticks a white line in at the very top of the artwork.
I'm on a macbook pro, retina.
Exactly what the topic title says. My goal is to draw a custom map with pinpoint accuracy compared to what I envision it as. So, I want to use a grid that I can fill in the individual sections of to create this image, and then remove the grid afterwards when I finish, or at least make it completely invisible.
Is there anyway to accomplish that?
I have a few GPS coordinates in the form as:
N37*29.059
W82*39.793
Can I convert this to a point and start drawing lines with these points?
I have to tabulate the X and Y co-ordinates along a polyline at 1 metre intervals. I have divided the polyline into segments of one metre and have tried to use a command called data extraction. So I use this command and individually click on each point. The end result gives me the X and Y coordinates in the order I have picked them however when I put it into a table on the drawing it messes up the order?
View 4 Replies View RelatedI got a drawing which was drawn normally.. but i need to get the drawing to align in a required co-ordinates.
View 3 Replies View RelatedIs there a command I can use to get the cartesian coordinates to appear in my drawing?
View 8 Replies View RelatedI have a drawing with the x and y as grid references, I have an excel spreadsheet with point information with grid references which are within the range on the drawing. How do I put the excell info onto the drawing?
View 8 Replies View RelatedI have a drawing at AutoCad and i want to change its coordinate like that
X'= X
Y'= -Z
Z'= Y
I know how to do it with the points (export their coordinates in a text and then transform the text and then import again at an Autocad) . But thus i loose all the line, arcs, etc .
My problem is that I require to extract coordinates from specific points on the drawing and set them out on the ground at the real location.
On the drawing there are several base station locations with known coordinates. I have tried coordinating the drawing using Ctrl a, move, then type in the known coordinates of one of the base station location but nothing happens. I have also set the drawing to world with no change.
The coordinates in the bottom left corner are shown but are around 500m out.
I am opening a drawing file whose units are already set to "Architectural - Inches".When im retrieving the coordinates of lines present in drawing it is returning in some other format.How do i change this.Or how do i know in what unit system the values are being returned.
View 3 Replies View RelatedI'm trying to make a standard block which will automatically read the co-ordinates! i have started making it trying to use fields, but when inserting the block into the drawing it stays at x=0, y=0, which is the point in the block. how do i get it to read the point in the drawing, and also how would i always get it to read the world ucs.
i have attached the block i've started, haven't added any dynamics yet as i'm just testing it.
How can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?
View 3 Replies View RelatedHow to switch Civil 3D back to drawing in absolute coordinates at all times (even during the PLINE command!)? And what would be a good reason for changing the default coordinate entry at the commandline from absolute to relative, anyhow?
View 9 Replies View RelatedI am using the ALIGN command to overlay two groups of blocks, I'm then using some VBA code to export the coordinates of the blocks to an excel sheet to make comparisons.
The issue I'm having is when I use the ALIGN command the coordinates exported are different to those in the drawing (but only for those moved using the ALIGN command).
I don't get this issue when I use the move, rotate and mirror commands, only ALIGN. What may be causing this?
I have a drawing in CAD (2013) and I am trying to assigned a Geo-coordinate system so I can import it into my ArcMap GIS program with the coordinates assigned to it already. Is there any way of doing this?
View 2 Replies View RelatedI have a lot of maps that have drawing units in yards. I'd like to place points on these maps given their lat/long data. Without having the mapping toolbox is there any way to either convert the map units or convert the points? I'm not worried about spherical distortion as the maps are close in.
View 4 Replies View RelatedI am trying to annotate a drawing so when i click on a point the X,Y,Z coordinates appear as text, but i don't want a cross to appear where i have clicked the point ( if that makes sense)
I would like for them to appear like this:
x = ........
y = .......
The coordinates would have to show to 3 decimal places.
Also when i have clicked a point is there anyway to get the coords into a excel sheet?
I just started my CAD classes. I have been doing basic 2d drawing and just learning the commands etc.
My question concerns polar coordinates. I know how they work, but are you expected to be able to get polar coordinates off lets say a hard copy drawing with no annotations.
My homework so far has always had the length of the lines depicted on the drawing but not the angles. So if I was required to replicate a drawing that had no annotation is there any way other than guessing or whipping out my protractor.
This is just a nagging thought as I strive to understand CAD.
In Autocad 2013, when I highlight a drawing in model space and copy, then go to new drawing and paste to original coordinates, everything comes in fine except for blocks. the blocks get thrown far away from everything else.
View 8 Replies View RelatedI have Mechanical 2011 and like the Grid On when I work, personal preference I guess. I have the system variable GRIDMODE set to 1 and the template drawing that opens when AutoCAD starts saved with the grid lines on.
I know the grid state is saved in the drawing but is there a way to have the grid always on regardless of the drawing, many drawings I work with are from outside of my organization.
1. i received a DWG that has a TIFF image referenced. This 30MB TIFF came in a separate folder (eTransmit) and the path is correct, but i cannot seem to grab the image in model space. the layer that has the xref is not frozen, and i can see the xref in the properties box and unload/load/detach, however i am unable to select or grab it. Was this done intentionally by the author to keep the image intact or is this property of transmitting?
2. The drawing coordinates is appearing in scientific notation and i need them to display all 9 digits. How do i change this?
Using Civil 3D 2013Coordinates coming out of survey equipment are modified state plane GROUND (scaled up from the origin by the combined factor).Drawing is setup with state plane coordinate system with user defined transformation to establish geodetic reference and the ability to label lat/long or import Bing map data.Survey database is setup with "No Datum, No Projection" (data is already at ground, I don't want ot transformed).Import style is PNEZD and is set to use Northing/Easting not Grid Northing/Grid Easting.After importing points into survey database, coordinates of survey points match the CSV. This is good.After importing points from database to drawing, they are taken as grid coordinates, are scaled again and are off ~5,300 feet northeast.Why would Civil 3D assume the points in the database are grid and scale them when the import style used did not specify grid? Is there a setting or something I can do to tell Civil 3D to leave my coordinates alone?
View 9 Replies View RelatedI want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View RelatedI am trying to create stakeout on grid in drawing wherein I wish to give details of X,Y coordinates along with Z (which will be volume comparison surface). I wish to display this information at every 5m interval on drawing. This can be useful for contractor for stakeout on site.
I tried using command thru "Points - Create Points, Suafec - On Grid" I did everything as directed on screen. However no information is getting displayed on screen. I am bit confused. I have made sure no layers are frozen and point style is also correct (i.e. it is not none). Still I don't see any information on screen.
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........