I have a lot of maps that have drawing units in yards. I'd like to place points on these maps given their lat/long data. Without having the mapping toolbox is there any way to either convert the map units or convert the points? I'm not worried about spherical distortion as the maps are close in.
View 4 Replies
is there any addon to directly convert x,y units into lat longs , ie setting limits and units from autocad sw itself?
View 6 Replies View RelatedWhen using "pixel units" the position and sizes are reported rounded to the nearest pixel.
The two squares below are both reported as 2 pixels square. One is actually 1.5 pixels square:
can the pixel coordinates and sizes not be rounded?
i m trying to import gmaps in to drawing.
i import it with drap image but problem is how to scale it.?
how to mache drawing and image?
I am on a 64 bit Windows 7 HP computer with AutoCAD 2010, and I am having a problem plotting a long (24" X 190") drawing file. We have a RICOH Aficio MP W3600 PS plotter. I have gone through the proper procedure through the Plotter Manager all the way to Select Custom Paper Sizes but the Add button is grayed out and I can't add a new user size. I was able to do this with AutoCAD 2004 on a Windows XP system but can't on this setup.
View 1 Replies View RelatedI had tried to draw in different units in autcad other than inches, but fail to find i way. I tried going on tutorials, but all they say was to type in:
"Type in Unit in command
Press enter
A option will pop up
Change Units to whichever.
Okay so I tried this, and I change it to feets. The problem is, that whenever i draw a line, it would always be in inches. I want to find a way to draw in feets, so how I can do this.
I am experiencing with an old drawing I am trying to open. The problem seems to lie in that there is a hidden scale factor being applied to the dimension.
I draw a line that is 1.27 long. When I dimension the line the resulting value is .635. I have double checked that my primary units are set to a scale factor of 1 and the problem still persists. Even more strange is that if I set the primary unit scale to 1.5 the resulting dimension value is correct at 1.905, with primary scale of 2 the dimension is 2.54, etc. I have used AutoCAD for many years and never run into this issue.I am dimensioning in the model space when this occurs and using AutoCAD LT 2012.
I am having problem getting my drawings to get small. Example 1" = 25' how is that translated into an architectural units. And the drawing to be small enough to fit in the screen. Actually I have problems with any architectural units to fit in my screen.
View 3 Replies View RelatedI am familiarizing myself with the existing drawings here. I am working on version 08 (was previously on 07). I opened a dwg in 08 and received an error message "Newer AEC Object Detected" stating that some commands would not be available. With no other option I opened the drawing and discovered it was in metric. I went up to the Format tab as I normally would to change the Units to Architectual and discovered that there was no option to change the units. Even typing in Units in the command bar didnt do anything. It seems as if this drawing was originally created in 07 and now OPENS in 08 but you lose commands? It used to be that you couldnt even open something it was created in a older version, no? Luckily a PC in the office does have 07 and I was able to open it there to change the units over but I cant do this every time.
View 7 Replies View RelatedI have drawn a couple of small buildings. I'm using meters and plotting to A3. For some reason the in the layouts I have to put in a scale of 15:1 and 8:1 to see the building when I print.
I have looked at some other buildings that people have drawn, they are of a similar size in real terms. However they are plotting to 1:25.
I am using AutoCAD LT 2012. I am having a problem getting a drawing to be the proper scale and units. I pulled a drawing in and it has been drawn 1' = 1 unit. I really would like to get it so I can make 1 unit = 1". I need to preserve the current dimensions in the drawing.
View 5 Replies View RelatedWhat if you are making a floor plan, and in that floor plan you are making a computer room that has two desks side by side (when put together) they measure 6' long.
Also, there's a simcard for the slim cell phone, on the desk.
How do you address this issue with respect to AutoCAD? Can you switch units mid stream?
I have a drawing that was given to me by an architect with a scale 1:250 (0.004 in viewport). The architect drew everything in millimeters and it's a Site Plan, why ? I do not know. The units in the drawing are decimal-millimeters.
The page set-up for layout 1 was for 24x36 drawing size (typ.)I know need to make a layout 2 for a sheet size 11x17 but I can not get my viewport to scale correctly. So, if a 24x36 sheet size had a VP with scale 0.004 (1:250) then what is the scale for a sheet size 11x17 ?
how do I go about determining the drawing units that are being used in a drawing? I want to be able to determine whether the units are set to feet, inches, millimetres, metres etc but can't fathom how to get this info using lisp.
View 2 Replies View Relatedwhat is the proper way to scale a drawing? The Lines that i have should be 3' ,not 3"
What is the correct way on to scale the drawing to the proper units?
I have some drawings that are drawn in millimeters. I need to add to the drawings but when I type 36 I get a line 36" long. I need to change autocad so that when I type 36 it draws a line that is 36mm.
View 9 Replies View RelatedWhat system variable changes the Drawing Units Precision?
View 5 Replies View RelatedIs it possible to insert a "field" instruction in the drawing template to get automatically the stations (beginning and end) of the long profile for the sheet considered ?
Example 0+700 - 1+400
I have an old dwg that I used to add new data to. I also inserted a block produced by Revit to get a building elevation. I am not sure when or how it happend, but my drawing scale units are stuck on arch. I am talking about the bottom right hand corner of the screen on the status bar where there is the spot to set drawing scale. When I open by clikcing the arrow all the scales are in architectural units. I can add a custom scale of 1"=100', but it does not otherwise appear in the list. I wasn't going to wrry about it, but when I layout a plan/pro series they do not seem to be scaling correctly (and I cannot find a place to specify what scale I want the views to be at). UNITS, -DWGUNITS & -AECDWGUNITS don't fix it, they are all set to decimal, etc. Using the seetings tab to change the drawing settings, everything is set to feet, there is no place to specify arch units, the 100 scale drawing is shown as a custom scale.
This is C3D release 2012, on a 64bit Win7 Pro machine, everything is up to date.
Where I can change the units for the drawing scale?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
We have some machines which seem to work in imperial maesurement a dn others which work in metric. it is frustrating when trying to insert a map block that is metric and is inserting into a drawing which is set up as imperial. We have tried using the - dwgunits to change to mm, and then using insunits , insunitsdef source and insunitsdeftarget to 0, this works when the PC is currentyl in use. when shut down and restarted it reverts back to imperial setting.
Am i right in thinking this is something that needs to be done at the software installation stage to make it default to metric everytime?
I have a venue drawing that is in mm and I need to convert it to ft/inch so I can update and get dimensions from it. Can this be done so when I change the format in drawing units it will update the drawing units?
Current settings.
Drawing units
Length:
Type - Decimal
Percisin - 0
Angle:
Type - Decimal Degrees
Precision - 0
Insertion Scale:
Unitless
AutoCAD 2010
Wondering if there's a way to enter imperial units in command line of a metric drawin and have it convert imperial to metric.
IE. I'm constantly taking field site dimensions in imperial and it'd be useful if i didn't have to do conversion every time.
how to adjust the default settings of my drawing units. I have adjusted these so that if I create a new drawing they are set as I want them. But when I output a drawing from
I work with a land surveying package. I use both AutoCAD 2006 and R14. When I export a cad dwg from the survey software and open it in R14 my drawing units are as I want them E.G Direction Control = North = 270 and should be set to clockwise. If I open the same exported drawing but in 2006 the settings change. If I create a new drawing in 2006, the settings are as I want them.
For an autocad assignment, we have been given a drawing in engineering notation (feet and inches) and have to draw it with SI units dimensions. Doing the drawing was fine, BUT, I drew it in inches and thought that I could change it to millimetres.
I have used the units command initially to set up engineering. Then after drawing returned to units to change to decimal. Dimensions turned out in inches regardless. I also tried the scale command to alter the scale, then dimension , still no luck. I went into the annotation menu got to modify primary units and alternate units and still no luck. Not even my tutorial teacher knows how to do this.
I am displaying dual units in a drawing with primary units being Customary. The metric unit displayed is incorrect.
View 1 Replies View Related I have a few GPS coordinates in the form as:
N37*29.059
W82*39.793
Can I convert this to a point and start drawing lines with these points?
I have to tabulate the X and Y co-ordinates along a polyline at 1 metre intervals. I have divided the polyline into segments of one metre and have tried to use a command called data extraction. So I use this command and individually click on each point. The end result gives me the X and Y coordinates in the order I have picked them however when I put it into a table on the drawing it messes up the order?
View 4 Replies View RelatedNow i am working on setting up the grid system for drawings . My task is after setting the grid label the possition of equipments od Data Center( e.g ups, panels) on drawing. I am able to set the grid but i don't know how to get my grid coordinate identifiers(x coordinates and y coordinates) which will label the equipments.
View 9 Replies View RelatedI got a drawing which was drawn normally.. but i need to get the drawing to align in a required co-ordinates.
View 3 Replies View RelatedActually, i tried to mention dimensions in metres in first layer and the same dimensions in feet in different layer.
View 1 Replies View RelatedIs there a way of opening existing cmds in the visual lisp editor and edit them to do something else? I'd like to set up a lisp where 'uu' would switch the drawing units from decimal to architectural units and hittng 'uu' again would switch it back.
View 4 Replies View Related
