I have Mechanical 2011 and like the Grid On when I work, personal preference I guess. I have the system variable GRIDMODE set to 1 and the template drawing that opens when AutoCAD starts saved with the grid lines on.
I know the grid state is saved in the drawing but is there a way to have the grid always on regardless of the drawing, many drawings I work with are from outside of my organization.
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedExactly what the topic title says. My goal is to draw a custom map with pinpoint accuracy compared to what I envision it as. So, I want to use a grid that I can fill in the individual sections of to create this image, and then remove the grid afterwards when I finish, or at least make it completely invisible.
Is there anyway to accomplish that?
Now i am working on setting up the grid system for drawings . My task is after setting the grid label the possition of equipments od Data Center( e.g ups, panels) on drawing. I am able to set the grid but i don't know how to get my grid coordinate identifiers(x coordinates and y coordinates) which will label the equipments.
View 9 Replies View RelatedI am trying to create stakeout on grid in drawing wherein I wish to give details of X,Y coordinates along with Z (which will be volume comparison surface). I wish to display this information at every 5m interval on drawing. This can be useful for contractor for stakeout on site.
I tried using command thru "Points - Create Points, Suafec - On Grid" I did everything as directed on screen. However no information is getting displayed on screen. I am bit confused. I have made sure no layers are frozen and point style is also correct (i.e. it is not none). Still I don't see any information on screen.
Is there a way to fade down the drawing limits and grid in the model space. I now have Autocad 2011 and I previously had 2009.
View 2 Replies View RelatedI have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point. Is there a quick command or script that does this?
View 2 Replies View RelatedWhat is the advantage/usage of limits command? I know it specify the area where could be filled with Grid command. But is it, its only usage? What other usage could be expected from "limits"?
If we want to make the paper space and model space same (draw in same scale, if we use 1/100 scale in metric system, 1 meter in model space is equal to 1 centimeter in paper space), is it a wise idea to set the model space into A4 or A3 paper size by use of LIMITS?
I think its utmost usage is in combination with "snap". Where you can quickly grab the points you want onscreen without need for coordinate input. Would be happy if there is other usage for GRID
Before, I thought limits will specify the area in model space where I can draw (limit the area of model space). But this is in contrary with the fact that model space is limitless and I can draw as far as I want.
It is really hard to understand that there is no limit for model space like real world.
I haven't understood these issues until I read many threads in CT. Now I have got most of them but I think I need some extra study to understand them 100%.
How to use the perspective tool and i understand that i can draw a grid onto this but the grid always seems to be out of whack when i do and the line spacing isn't at all perfect. What i want to be able to do is draw a grid with equal spacing and have the ability to warp this so it looks all bent up going off into the distance.
I can see this is going to be something that i have to draw in manually but i'm kind of hoping that i can have the bulk of the job done for me.
However, if i do have to draw it manually, how would i go about spacing the lines equally along a wafty curved line???
I am using Xara Extreme 4, and am trying to produce an isometric drawing as I have previously done in CAD software. I have found that the lines drawn do not exactly "snap" to the grid points and some inaccuracy is evident if the drawing is magnified.
View 9 Replies View RelatedI have created a scaled floor plan dwng using the grid in PSE 10. It would be very useful to me to be able to print the grid directly with my drawing - preferably as a semi-opaque 'background'.
View 5 Replies View RelatedUsing Illustrator CS5 I am drawing a 5 drawer cart in the 2D Perspective grid. After drawing one drawer with connected sides, back and bottom I want to be able to copy and move this drawer 4 times into the correct positions in the cart. I do not want to redraw the drawer 4 times. I know I must use the Perspective Selection Tool to do this. However, I cannot get it to move the entire copied drawer into the next position. I have tried using PathFinder to unite the parts of the drawer and the Compound Path command but to no avail. How can I accomplish this task?
View 4 Replies View RelatedI have my grid set to 10px (with subdivisions set to 1). Snap to Grid is enabled. I had "Align New Objects To Pixel Grid" checked when I created the document.
When I draw an object, it will snap to the 10px grid as I am drawing it. However, when I go to move the object around, it will not snap to the grid at all. In Photoshop and Fireworks, this was a piece of cake, but in Illustrator I've never been able to get this to work, nor find a solution for it. The only way I can kind of get it to work is to set my grid to 1px, but I really don't want to be zooming in that far constantly when moving things around.
For what it's worth, this is happening in Illustrator CC, but I've had this same issue with older versions as well.
I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
Understanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
After filling the inside of a line drawing, (cartoon "shape"), I'm left with the checkerboard pattern that indicates transparency. I'd just like to get rid of that checkerboard pattern so I can view my drawing the way it really looks! Can this be done in GIMP?
View 6 Replies View RelatedRevit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedWhen using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
I'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies View RelatedI'm new in InDesign. How do I remove the purple grid that was already there when I made my document, WITHOUT removing ALL my grids?
View 5 Replies View RelatedI have an interior laid out on a scaled grid, and I want to print a copy that displays the grid (ie: visible on the printed page). But everything (& I mean everything) indicates that grids per definition NEVER print.
I also thought that I could create my own grid on a separate layer, but if that's an option, I can't find that either...
I was thinking of something like photoshop can do. Have like a 32x32 pixel grid, then within that 32x32 square a 1x1 pixel grid show up? Of course a different lin maybe dotted?
View 14 Replies View RelatedWhen I drag around vector points of paths they are not constrained to the pixel grid, when the option "Snap Vector Tools and Transform to Pixel Grid" is off. This is the behavior I expect.BUT: When I drag whole paths, they snap to the pixel grid, no matter what. I even have snapping completely disabled.
This is particularly annoying when eg. creating a path for a zipper. I first make a path for the inside of the jacket or whatever, then I make one notch for the zipper and copy it over and over again for all the notches. It's very troubling when these elements snap to the pixel grid, because it's very unprecise then.
The drawings I'm receiving from the architects are all set to the world coordinate system. So when it comes to setting out they coordinates are useless to me. So what I want to know is how can I rotate my drawing so it's aligned to my local grid?
View 9 Replies View RelatedWhen I create a grid from our OSIP DEM files the contours come in as a block. I usually do 1' and 5' contours. I would like to break these so that when I select a 1' contour it will show up individually with elevation data still attached. If you select one now, it selects the entire grid. If you explode it, you lose the grid file. Is there a way to do this or will a just have to label the contours so I know where I am at?
View 8 Replies View RelatedWe here at work have recently implemented using the survey database feature in CAD as a better way of manipulating and organizing points in our drawings. However, we have begun to notice a few issues with how the survey database imports points (?).
Sometimes, and I say sometimes because it is very sporratic, some drawings exhibit the issue and some do not, the points will be skewed off the linework (we are converting existing projects to the survey database). In these situations I find that the Northing and Easting don't match the ascii file it was imported from, instead the "Grid Northing" and "Grid Easting" do. Also, some drawings will have a slightly different Grid Northing and Grid Easting vs Northing and Easting, whereas some drawings will have the exact coordinates for both sets of fields. I believe the issue is one and same.
Our points handling goes like this, Data Collector--->TBC (where ground to grid and scaling is performed)---->exported to ascii file------>Imported to CAD.
This is very confusing and irritating at the same time, and really counterproductive to be troubleshooting why our points keep moving. Redrawing the linework is NOT an option, we'll sooner go back to simple ascii file imports (where the problem is NOT present) then have to redo all of our work on our projects.
I have been working with ADT 2012 for a month now, and I am missing the way that my crosshairs used to snap to a grid, even if a command is NOT active. If I am zoomed in close, I used to be able to have my pickbox/crosshairs snap to the 1" grid that I have set up. However, that I only works if I have a command like "LINE". What setting do I need to change to make this work the way it has for YEARS?
View 7 Replies View RelatedI used a vectorising program (vectormagic) and I get a dxf format file. Now I am trying to edit it with Autocad (2011) mas it seems to exist a kind of grid with predefined dots and I can only start and finish a line in its intersections. I already tried the grid and ortho commands without success.
I am new with AutoCAD (I have plenty of experience with SolidWorks and Inventor). This is the link to the dwg file (saved by AutoCAD. Tomorrow I can upload the original dxf file) [URL] .......