AutoCad :: Drawing Coordinates Is Appearing In Scientific Notation And Display All 9 Digits
Aug 27, 2011
1. i received a DWG that has a TIFF image referenced. This 30MB TIFF came in a separate folder (eTransmit) and the path is correct, but i cannot seem to grab the image in model space. the layer that has the xref is not frozen, and i can see the xref in the properties box and unload/load/detach, however i am unable to select or grab it. Was this done intentionally by the author to keep the image intact or is this property of transmitting?
2. The drawing coordinates is appearing in scientific notation and i need them to display all 9 digits. How do i change this?
View 4 Replies
ADVERTISEMENT
Mar 23, 2011
Using a keynote database on some modernization plans.
The database has keynotes listed as: (1.1,1.5...2.3,2.5...9.13,9.14 etc.)
All other keynotes are fine. When selecting one particular keynote 9.14-Carpet Tile Walk Off Mat (CPT-2)
...instead of 9.14 displaying on the plan like all the other keynotes, this displays: 09 68 00.C1
(I've made sure that only the key is selected to display and not the key and note option from the annotation options list. So that can't be the problem.)
View 0 Replies
View Related
Mar 11, 2013
is there a function in autocad that can display the coordinates of a point...like when we use linear dimension lengthe of line is displayed..
View 4 Replies
View Related
Dec 24, 2013
I amdrawing in autocad version 2010,,and move to version 2013 end then i open my project in version 2013 Text Coordinates & Description picture can't display after use autocad version 2013,,what happen??
View 1 Replies
View Related
Jan 8, 2014
I can create labels to display stationing in a profile, but is there a way to display the coordinates in the profile instead? When I need to move my pipes I am using the station I get from the profile label and then use grip move. If I could get the N, E, I could just type it in on the Vista table.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 4 Replies
View Related
Sep 7, 2011
NOTE: This is in AutoCAD 2002.
I'm working on one of our standard layouts for a client. Our typical drawing setup is the base drawing file, surrounded by our Xref'ed border. On said border Xref, we have all the information that does not change between drawings (Revision history, address of job site, etc). The only things that change - and, thus, are not on the xref - are the title of each individual sheet and their number; in the case of these objects, they are located on the drawing file itself in the appropriate position. They are, however, the same font as the text in the Xref - "Standard". Or, at least, they're supposed to be.
The text in the base drawing file seems to be a different version of the text from the Xref - a much blockier, sharper-edged version than the Xref text. My first response was "Okay - I'll just copy/paste the text from the border into my base drawing file, and force the existing text to match the properties of the imported text."
This, however, did not work. The imported text automatically assumed the same form as the existing text. Here's a screenshot from the base drawing, illustrating this (The "Mechanical Plan" also exists on the base drawing, and not the Xref):
I copied the existing text from the base drawing (In this case, the "Mechanical Plan") and pasted it directly into the Xref itself, to see what would happen. Apparently, it wants to stay blocky:
In the latter example, I even tried to force the blocky text to assume the properties of the smooth text via MA (Match properties). I specifically need to make the text in the base drawing conform to the style that the text is assuming in the Xref - which is to say "Smooth."
View 0 Replies
View Related
Dec 17, 2012
My node for a particular drawing is appearing extremely large. I recall there being a set variable to adjust this, but I cant seem to find it.
View 3 Replies
View Related
Sep 30, 2013
I'd like to know the coordinates relative to the last entry when creating lines (splines). When creating splines using the line tool, it would be useful to know the coordinates of my current cursor position relative to the last point in an easy way, so I can draw precisely a long line without having to memorize the coordinates of the last point.
Initially, I thought the 'Keyboard Entry" rollout would show the values that reflect what I'm doing visually, just like the rectangle tool for example, or pretty much any other tool, I don't know why the 'line' tool is different but anyways.
View 1 Replies
View Related
Jun 29, 2011
I'm having a problem with sketches not appearing on drawings in Inventor 2012. This is for a product line made using iparts and iassemblies, and affects approximately 150 drawings.
These sketches were made in Inventor R11, and are attached to part features in the drawing view. When opening these drawings in 2012, the dimensions that were attached to the sketch are still visible, (albeit in the wrong places and on the wrong features), but the sketch itself is not. The sketch still exists as an item under the view, but the actual contents of the sketch (lines and hatching) are gone.
The assembly consists of three identical cylindrical parts with mitred ends welded together in two operations to form a T-shaped part. I have a view representation for each operation. The drawing has each view on one page.
The first step requires welding the two parts together to form an "L" shape, and then cutting off a portion of the corner of the "L" to facilitiate joining the third part in the second operation. In my assembly, I mated the two cylindrical parts together, then created a sketch and using geometry projected from the parts, defined the area of material removal at the corner and extruded the feature. Then, I mated the third part.
However, since I cannot turn off the extrusion when defining a view representation, I needed to redraw the corner I removed so it reflected reality when showing this first phase on the drawing,. I accomplished this using a sketch on the view in the .idw, again using geometry projected from the part. This worked out excellently in Inventor R11. Not only was I able to show the missing part, but because this was an iassembly made from iparts, I could use the same drawing for differnet sizes by "saving as..." and then selecting a diffenent Assembly State on the Model State tab of the Drawing View Dialog Box. The views would update, and so would my sketch, since it was defined by the geometry of the part.
So we continued on this way, and now that we've moved to 2012, none of these sketches appear anymore. We're faced with having to redo this work on every drawing that we've created for this part -- about 150 or so.
View 7 Replies
View Related
Mar 21, 2013
I don't simply want to see the coordinates when I hover over a point. I want the coordinates actually showing on the document. Is there a plug-in that can accomplish this easily?
View 4 Replies
View Related
Feb 21, 2012
I have a few GPS coordinates in the form as:
N37*29.059
W82*39.793
Can I convert this to a point and start drawing lines with these points?
View 7 Replies
View Related
Apr 4, 2012
I have to tabulate the X and Y co-ordinates along a polyline at 1 metre intervals. I have divided the polyline into segments of one metre and have tried to use a command called data extraction. So I use this command and individually click on each point. The end result gives me the X and Y coordinates in the order I have picked them however when I put it into a table on the drawing it messes up the order?
View 4 Replies
View Related
Dec 6, 2012
Now i am working on setting up the grid system for drawings . My task is after setting the grid label the possition of equipments od Data Center( e.g ups, panels) on drawing. I am able to set the grid but i don't know how to get my grid coordinate identifiers(x coordinates and y coordinates) which will label the equipments.
View 9 Replies
View Related
Sep 28, 2012
I got a drawing which was drawn normally.. but i need to get the drawing to align in a required co-ordinates.
View 3 Replies
View Related
Apr 15, 2013
Is there a command I can use to get the cartesian coordinates to appear in my drawing?
View 8 Replies
View Related
Jun 8, 2012
I have a drawing with the x and y as grid references, I have an excel spreadsheet with point information with grid references which are within the range on the drawing. How do I put the excell info onto the drawing?
View 8 Replies
View Related
Nov 30, 2011
I have a drawing at AutoCad and i want to change its coordinate like that
X'= X
Y'= -Z
Z'= Y
I know how to do it with the points (export their coordinates in a text and then transform the text and then import again at an Autocad) . But thus i loose all the line, arcs, etc .
View 3 Replies
View Related
Sep 28, 2011
I am using inv 2012 sp1 and I just noticed in the drawing mode when I set a champhre note the notation has changed? it is now showing C1 or C2 etc. can I go back to the original setting?
View 5 Replies
View Related
Feb 6, 2013
My problem is that I require to extract coordinates from specific points on the drawing and set them out on the ground at the real location.
On the drawing there are several base station locations with known coordinates. I have tried coordinating the drawing using Ctrl a, move, then type in the known coordinates of one of the base station location but nothing happens. I have also set the drawing to world with no change.
The coordinates in the bottom left corner are shown but are around 500m out.
View 5 Replies
View Related
Jul 17, 2013
I am opening a drawing file whose units are already set to "Architectural - Inches".When im retrieving the coordinates of lines present in drawing it is returning in some other format.How do i change this.Or how do i know in what unit system the values are being returned.
View 3 Replies
View Related
May 13, 2011
I'm trying to make a standard block which will automatically read the co-ordinates! i have started making it trying to use fields, but when inserting the block into the drawing it stays at x=0, y=0, which is the point in the block. how do i get it to read the point in the drawing, and also how would i always get it to read the world ucs.
i have attached the block i've started, haven't added any dynamics yet as i'm just testing it.
View 1 Replies
View Related
Oct 17, 2012
I have some issues with the notation for physical properties in the Inventor 2013 material editor.
Instead of displaying the obvious first choice metric SI notation kg/m^3 or something similar it display a self made? and awkward N*s^2/mm^4. I don't want this notation. How can I change to something more user friendly? It can be a bit hard to distinguish if a material have 0.00000000001 N*s^2/mm^4 or 0.0000000001 N*s^2/mm^4.
The document properties "units" folder have mm, seconds, degree and kilogram as default.
View 6 Replies
View Related
Apr 20, 2012
Is there a way to avoid 3 digits in numbers from = <Dy> x <Thick> L = <length>, from BOM to partlist.
I only want 104 mm x 2 mm L = 208 mm
View 2 Replies
View Related
Jul 1, 2012
I am trying to number my doors, and the door tag (AEC6_Door_Tag), won't let me create door numbers with 3 digits. I have never had this problem before. It keeps creating tags with 2 digits.
View 6 Replies
View Related
Jul 12, 2012
How can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?
View 3 Replies
View Related
Sep 26, 2012
How to switch Civil 3D back to drawing in absolute coordinates at all times (even during the PLINE command!)? And what would be a good reason for changing the default coordinate entry at the commandline from absolute to relative, anyhow?
View 9 Replies
View Related
Nov 19, 2013
I am using the ALIGN command to overlay two groups of blocks, I'm then using some VBA code to export the coordinates of the blocks to an excel sheet to make comparisons.
The issue I'm having is when I use the ALIGN command the coordinates exported are different to those in the drawing (but only for those moved using the ALIGN command).
I don't get this issue when I use the move, rotate and mirror commands, only ALIGN. What may be causing this?
View 2 Replies
View Related
Oct 7, 2013
I have a drawing in CAD (2013) and I am trying to assigned a Geo-coordinate system so I can import it into my ArcMap GIS program with the coordinates assigned to it already. Is there any way of doing this?
View 2 Replies
View Related
Sep 8, 2011
I have a lot of maps that have drawing units in yards. I'd like to place points on these maps given their lat/long data. Without having the mapping toolbox is there any way to either convert the map units or convert the points? I'm not worried about spherical distortion as the maps are close in.
View 4 Replies
View Related
Jan 18, 2013
I am trying to annotate a drawing so when i click on a point the X,Y,Z coordinates appear as text, but i don't want a cross to appear where i have clicked the point ( if that makes sense)
I would like for them to appear like this:
x = ........
y = .......
The coordinates would have to show to 3 decimal places.
Also when i have clicked a point is there anyway to get the coords into a excel sheet?
View 1 Replies
View Related
Aug 19, 2012
I just started my CAD classes. I have been doing basic 2d drawing and just learning the commands etc.
My question concerns polar coordinates. I know how they work, but are you expected to be able to get polar coordinates off lets say a hard copy drawing with no annotations.
My homework so far has always had the length of the lines depicted on the drawing but not the angles. So if I was required to replicate a drawing that had no annotation is there any way other than guessing or whipping out my protractor.
This is just a nagging thought as I strive to understand CAD.
View 2 Replies
View Related
