AutoCAD 2010 :: How To Get Cartesian Coordinates To Appear In Drawing
Apr 15, 2013Is there a command I can use to get the cartesian coordinates to appear in my drawing?
View 8 Replies
ADVERTISEMENT
AutoCAD Inventor :: Input 3D Cartesian Coordinates / Batch Input (x / Y / Z)
Feb 4, 2013My need is to create up to 50 points from the same origin in a three dimensional Cartesian coordinate system but I’d also like to have a labels for each point that show up in the feature tree.
Are there Inventor 2013 plugin (i.e., add-on, 3rd party, AP) to convert a list 3D Cartesian coordinate system locations (i.e., points) to Inventor to work points(x, y, z)?
I found that I cannot create 3D points in the assembly. Is this correct? I did find that an Inventor part may be used to create a 3D sketch that creates points in 3D space. In the past few days, I found two ways to create 3D points within a iPRT; the batch way uses an Excel file but it then does not allow me to name the points in the feature tree. The second way is to create them one at a time but that take way too much time.
AutoCAD 2010 :: Drawing With GPS Coordinates
Feb 21, 2012 I have a few GPS coordinates in the form as:
N37*29.059
W82*39.793
Can I convert this to a point and start drawing lines with these points?
AutoCAD 2010 :: Adding Coordinates To A Drawing?
Jun 8, 2012I have a drawing with the x and y as grid references, I have an excel spreadsheet with point information with grid references which are within the range on the drawing. How do I put the excell info onto the drawing?
View 8 Replies View RelatedAutoCAD 2010 :: Automatically Get Point Coordinates And Show It In Drawing?
Jul 12, 2012How can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?
View 3 Replies View RelatedAutoCad :: Extract X And Y Coordinates On A Drawing?
Apr 4, 2012I have to tabulate the X and Y co-ordinates along a polyline at 1 metre intervals. I have divided the polyline into segments of one metre and have tried to use a command called data extraction. So I use this command and individually click on each point. The end result gives me the X and Y coordinates in the order I have picked them however when I put it into a table on the drawing it messes up the order?
View 4 Replies View RelatedAutoCad 2D :: How To Get X And Y Coordinates Of Grid On Drawing
Dec 6, 2012Now i am working on setting up the grid system for drawings . My task is after setting the grid label the possition of equipments od Data Center( e.g ups, panels) on drawing. I am able to set the grid but i don't know how to get my grid coordinate identifiers(x coordinates and y coordinates) which will label the equipments.
View 9 Replies View RelatedAutoCad :: How To Set A Drawing To Required Coordinates
Sep 28, 2012I got a drawing which was drawn normally.. but i need to get the drawing to align in a required co-ordinates.
View 3 Replies View RelatedAutoCad :: Changing Coordinates Of Existing Drawing
Nov 30, 2011I have a drawing at AutoCad and i want to change its coordinate like that
X'= X
Y'= -Z
Z'= Y
I know how to do it with the points (export their coordinates in a text and then transform the text and then import again at an Autocad) . But thus i loose all the line, arcs, etc .
AutoCAD 2010 :: Importing Coordinates
Oct 11, 2012if it's possible to import a list of coordinates into a drawing so that it places points in the drawing at the specified locations?
View 2 Replies View RelatedAutoCAD 2010 :: Z Coordinates With Multileader?
Sep 16, 2013Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.
AutoCad :: Switch X And Y Coordinates In LT 2010?
Aug 25, 2011A while back, I sent some dxf files (all made in AC Lt 2010) to a company that uses a system called DP/Com. Apparently, this program reads coordinates (Y,X) instead of (X,Y), which means that they think all of my files are really wierd . Each and every number in the coordinates of my points are correct, so it's just the order I want to change.
Is there any way to "switch" the coordinates of several points at once in AC? (Without having to extract a coordinate list, switch columns in Excel and then importing them back...?)
AutoCAD LT :: Coordinating Drawing To Actual On Ground Coordinates
Feb 6, 2013My problem is that I require to extract coordinates from specific points on the drawing and set them out on the ground at the real location.
On the drawing there are several base station locations with known coordinates. I have tried coordinating the drawing using Ctrl a, move, then type in the known coordinates of one of the base station location but nothing happens. I have also set the drawing to world with no change.
The coordinates in the bottom left corner are shown but are around 500m out.
AutoCAD .NET :: Retrieving The Coordinates Of Lines Present In Drawing
Jul 17, 2013I am opening a drawing file whose units are already set to "Architectural - Inches".When im retrieving the coordinates of lines present in drawing it is returning in some other format.How do i change this.Or how do i know in what unit system the values are being returned.
View 3 Replies View RelatedAutoCad :: Block With Coordinates - Read Points In Drawing?
May 13, 2011I'm trying to make a standard block which will automatically read the co-ordinates! i have started making it trying to use fields, but when inserting the block into the drawing it stays at x=0, y=0, which is the point in the block. how do i get it to read the point in the drawing, and also how would i always get it to read the world ucs.
i have attached the block i've started, haven't added any dynamics yet as i'm just testing it.
AutoCAD 2010 :: Extract Coordinates To A Spreadsheet?
Jun 11, 2013Is it possible to extract coordinates to a spreadsheet or display them on screen of points in AutoCad. I would like to know the coordinates of all the intersections of the lines in the model shown in the attached pdf. The 3d model was drawn in Revit as model lines. If there is a simple way to draw this shape in AutoCad, it is part of a torus.I imported it into AutoCad as Revit had a few limitations.
View 5 Replies View RelatedAutoCAD LT :: Can State Plane Coordinates Be Used In 2010
Sep 9, 2013I had a request to add wells using state plane coordinates using an aerial photo. Is this possible in acadlt 2010? If possible I would thinkk that if I could get a relationship with the wells I could adjust the image/photo if I had two known coordinates on the photo. Not even sure if you can change to NAD83 (1991) in light.
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Switch To Drawing In Absolute Coordinates At All Times
Sep 26, 2012How to switch Civil 3D back to drawing in absolute coordinates at all times (even during the PLINE command!)? And what would be a good reason for changing the default coordinate entry at the commandline from absolute to relative, anyhow?
View 9 Replies View RelatedAutoCAD 2013 :: Align Command - Coordinates Exported Are Different To Those In Drawing
Nov 19, 2013I am using the ALIGN command to overlay two groups of blocks, I'm then using some VBA code to export the coordinates of the blocks to an excel sheet to make comparisons.
The issue I'm having is when I use the ALIGN command the coordinates exported are different to those in the drawing (but only for those moved using the ALIGN command).
I don't get this issue when I use the move, rotate and mirror commands, only ALIGN. What may be causing this?
AutoCAD 2013 :: Assigning Coordinates To Drawing To Be Imported Into ArcMap GIS
Oct 7, 2013I have a drawing in CAD (2013) and I am trying to assigned a Geo-coordinate system so I can import it into my ArcMap GIS program with the coordinates assigned to it already. Is there any way of doing this?
View 2 Replies View RelatedAutoCad :: Maps Drawing Units In Yards - Lat / Long Coordinates
Sep 8, 2011I have a lot of maps that have drawing units in yards. I'd like to place points on these maps given their lat/long data. Without having the mapping toolbox is there any way to either convert the map units or convert the points? I'm not worried about spherical distortion as the maps are close in.
View 4 Replies View RelatedAutoCad :: Annotate Drawing So When Click On Point - X Y Z Coordinates Appear As Text
Jan 18, 2013I am trying to annotate a drawing so when i click on a point the X,Y,Z coordinates appear as text, but i don't want a cross to appear where i have clicked the point ( if that makes sense)
I would like for them to appear like this:
x = ........
y = .......
The coordinates would have to show to 3 decimal places.
Also when i have clicked a point is there anyway to get the coords into a excel sheet?
AutoCad :: Determining Polar Coordinates On Hard Copy Drawing
Aug 19, 2012I just started my CAD classes. I have been doing basic 2d drawing and just learning the commands etc.
My question concerns polar coordinates. I know how they work, but are you expected to be able to get polar coordinates off lets say a hard copy drawing with no annotations.
My homework so far has always had the length of the lines depicted on the drawing but not the angles. So if I was required to replicate a drawing that had no annotation is there any way other than guessing or whipping out my protractor.
This is just a nagging thought as I strive to understand CAD.
AutoCad 2D :: Copy Blocks From 1 Drawing To Another Using Paste To Original Coordinates
Jan 31, 2013In Autocad 2013, when I highlight a drawing in model space and copy, then go to new drawing and paste to original coordinates, everything comes in fine except for blocks. the blocks get thrown far away from everything else.
View 8 Replies View RelatedAutoCAD 2010 :: Copy And Paste To Original Coordinates
Nov 20, 2012I am currently designing a kitchen with a complete floor plan. I had requested some accessories files from a company called Pearl works and they sent me each file that I requested. The problem is that when I copy and paste each image file into my existing floor plan, they all show up as the same image and not the seperate images that should appear. Am I doing something wrong with the clipboard process?
I have also tried deleting the drawing and re-inserting a different file and when I do every file thereafter is the same as the one that I just switched.
AutoCad :: Drawing Coordinates Is Appearing In Scientific Notation And Display All 9 Digits
Aug 27, 20111. i received a DWG that has a TIFF image referenced. This 30MB TIFF came in a separate folder (eTransmit) and the path is correct, but i cannot seem to grab the image in model space. the layer that has the xref is not frozen, and i can see the xref in the properties box and unload/load/detach, however i am unable to select or grab it. Was this done intentionally by the author to keep the image intact or is this property of transmitting?
2. The drawing coordinates is appearing in scientific notation and i need them to display all 9 digits. How do i change this?
AutoCAD 2010 :: Displaying East And West Coordinates At Certain Point
Apr 6, 2010I would like to display East and West coordinates at certain points ( like circle center lines etc.). how can i do this so that the display is accurate and readable?
View 4 Replies View RelatedAutoCAD 2010 :: Excel Data Coordinates To Draw Line?
Feb 20, 2013I want to drawn LINE by excel data to autocad 2010, I have excel file x,y and z coordiates.
I want to draw line to import excel data coordiates to autocad ?
AutoCAD 2010 :: Command (Paste With Original Coordinates) Not Working
Jul 23, 2012I'm using autocad2010. The command( Paste with original coordinates ) is not working.
The application(autocad-2010) uninstall and then reinstalled the error is continued.
AutoCAD 2010 :: Insert Large Amount Of Coordinates As Block In DWG
Aug 21, 2012I have an excel spreadsheet with a lot of coordinates. I know how to insert a large amount of coordinates as an block in my dwg. But what I want is to connect my Excel to my dwg, so if I change my Excel automatically the blocks in my dwg change.
View 3 Replies View RelatedAutoCAD Civil 3D :: Survey Points With Ground Coordinates Are Scaled Inserted Into Drawing?
Sep 5, 2013Using Civil 3D 2013Coordinates coming out of survey equipment are modified state plane GROUND (scaled up from the origin by the combined factor).Drawing is setup with state plane coordinate system with user defined transformation to establish geodetic reference and the ability to label lat/long or import Bing map data.Survey database is setup with "No Datum, No Projection" (data is already at ground, I don't want ot transformed).Import style is PNEZD and is set to use Northing/Easting not Grid Northing/Grid Easting.After importing points into survey database, coordinates of survey points match the CSV. This is good.After importing points from database to drawing, they are taken as grid coordinates, are scaled again and are off ~5,300 feet northeast.Why would Civil 3D assume the points in the database are grid and scale them when the import style used did not specify grid? Is there a setting or something I can do to tell Civil 3D to leave my coordinates alone?
View 9 Replies View Related