How (if possible) i can change my settings so that if im working on a particular layer, if i draw a dimension it will automatically be on my preferred dimensions layer and not the one im working with? this was pretty straight forward on MicroStation.
View 6 RepliesMy quest: if your in a different layer working on adding walls for eg. You want add a dimension to that wall. When I hit DLI, How do I make sure that the dim i just entered goes directly to the DIM layer instead of the wall layer.
View 3 Replies View RelatedWhen selecting any dimension type (from the standard AutoCAD toolbars) i would like it to already be in the layer "dimensions". Currently it starts in layer 0.
I've been browsing the web a bit and found a lot about it but people are talking about LISP's?? I can do magic things in AutoCAD but i am a complete stranger to LISP's, Macro's, etc... Would like to learn but where to start..
Anyway i can cover this with something else then writing an LISP?
We are using autocad 2012.
Is there a way to automatically place dimensions on a specific layer, for example layer DIM.
where do I find layer dimensions for each layer in CS6? e.g. I might have the image of a table superimposed on the background, but just want the pixcel-based dimensions of the table?
View 3 Replies View RelatedIs there any way of getting the pixel dimensions of a layer within the project? Clicking on image>image size only gives me the dimensions of the entire thing.
Example: I am building a mockup of a Website at 1000x620. After adding photos and free transforming them, I would like to know what the size turned out to be so that I can now resize the original photo to place in the site.
I'm trying to create an album design that has a grid effect with all the images I have. But how to put specific dimensions on each layer..I've tried the image size option but its not working - do I need to free transform and try to figure it out dimensions free handed?? Surely not?
If you can imagine U2s Achtung Baby (Or at a long shot: Exile On Main Street) That is where I'm headed (or TRYING to head rather) with it.
When I create an image layer (say 1.5 x 1.5 inches) and when I set that image onto a background (say 2.5 x 2.5 inches) the image expands to the larger background size.
Why? Or what am doing wrong that would cause this to happen. I recently upgraded from PSE 9 to PSE 12. This was never an issue with PSE 9.
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies View RelatedI typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies View Relatedis there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
Also be sure to pick the 'aligned dimension' method and not the 'linear dimension'. I hope that works in Revit as it does in AutoCAD.
View 9 Replies View RelatedIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedHaving issue with the layer dialogue box showing not enough layer name. Is it possible to widen it or is that controlled somewhere?
View 1 Replies View RelatedI need a lisp can change all elements in block to layer 0 except layer defpoint but still keep linetype, color as it is.
View 1 Replies View RelatedWhen i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
A drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
I have a bunch of objects on a particular layer, and they're all different colors and linetypes and lineweights, and i want them to all take on the color / linetype / lineweight that i chose for that layer.. how do i do this?
View 1 Replies View RelatedI have a drawing where I need to open the layer manager to turn on a layer in a view port but cannot get to that particular column. As you look across the top of the layer manager I can see all the headings of each column beginning with "Name", "Status", "On" and so forth. The last column heading I see is "Description" but I need to go even further to the right to get to the column I need to be at but can't get there. There is no scroll button on the bottom of the layer manager which would allow me to do that.
View 7 Replies View RelatedI have a client experiencing a layer manager dialog box issue - the layer names are disappearing... This is not happening all the time - and in different files.
I have attached an image below.
what does it mean when someone says a block is created on layer 0 vs a regular layer?
View 3 Replies View Relatedyou can match the layer filters with in the layer manager to the drop down on the ribbon..so how do i get the to match so the filter im viewing in the manager is what i see in the ribbon.
View 1 Replies View Relatedlisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View RelatedSay I have 2 items, one is on layer "M-Duct" and the other on "M-Pipe" (they are in the same drawing). Any lisp routine that would create the layers "M-Duct-New" and "M-Pipe-New" (based on the same color and LT as the original layers) and then move those objects to the newly created layers?
View 9 Replies View RelatedPossible to link an xref layer and local layer so they display the same (eg. sync viewport colour, linewieght, line type)?
I insert xref's for my base drawing but legend is on local layers and I would like to be able to ensure that the line colour and linetype always match...
I have a customized button to draw an ‘ac-arrow’. I created a lisp to create the layer “G-ANNO-LEDR”
if the layer name is not found. The advanced part I would like is:
Current layer: E-ANNO-WIRE
Ac-Arrow Leader: G-ANNO-LEDR
OPTION 1:
If, say I am on current layer “E-ANNO-WIRE” and need to draw my “ac-arrow” leader, and continue working
on the original layer “E-ANN-WIRE” (and have the leader be drawn [remain] on the layer “G-ANNO-WIRE”).
With this option, I have the block “ac-arrow” imbedded in my template drawing file to have the block at hand.
With this option, the layer “G-ANNO-LEDR” will be created IF it is not on the drawing.
OPTION 2:
- Currently be on layer “E-ANNO-WIRE”
- Bring in the block “ac-arrow” from my block library “L:AutoCADSymbols”
- Draw the “ac-arrow” leader which will be on layer “G-ANNO-LEDR” (this layer created IF it is not
on the current drawing).
- After the leader is drawn’
- Be put back to the layer I was, “E-ANNO-WIRE”, and continue working.
The OPTION 2 is what I would really like to have. A while back, I happen to see one like OPTION 2, but I cannot
find it anymore on the users groups. I have been searching for a while now.
Currently, I use the button in my customized toolbar (see image) and have to have the “ac-arrow” block in my drawing and have its layer created in the drawing.
I'd like to have/write a lisp to change all objects on layer "0" to layer "PC - Module"
If possible also;
save the document close the document open next in directory run layer changer program again.
I'm having issues with Civ3d 2013. I pushed off upgrading from 2012 because of the format change and the service pack release. I was hoping little glitches would be fixed.
Here are the a couple of glitches to date that I have seen no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I dont want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipeouts dont work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
Any script that when ran will set lineweights of a layer based on what color the layer is assigned. For instance if I have 3 lines that are green on 3 different layers. I need the script to change all 3 layers lineweight to .015mm. I have drawings that are inconsistant with layer names so layer translator and methods of that nature will not work because I do not know all the layer names and I have 100 drawings to do this to.
View 3 Replies View RelatedI try to freeze layer in ACAD LT 2013 from Layer-II toolbar menu but it is not working.
View 1 Replies View Related