In Acad Architecture 2013 30 day trial, Autosave and backup are not working, even tho they are checked in Options>Open & Save>File Safety... Where the autosaves should be, in C:UsersTomF there's no appdatalocalemp showing in Windows Explorer. I lost a lot when Paste special caused a crash (as it has more than once).
View 8 RepliesI have a large catalog of over 24K pictures. I want to use Backup, but it just does not work. I have tried to start the process and just let it run for over 2 hours, no results. I have a new Intel i& system with a 2TB HDD and 16GB of RAM so I don't think processing power is an issue.
View 1 Replies View Relatedhiya! so my master media library is running off a 1 tb outboard drive to lightroom and i have a 2 tb outboard drive as a master backup, i drag new media over to the drive through finder on a mac- will this be able to connect to lightroom's catalog in case of the primary drives eventual failure? is there a better way?
View 4 Replies View RelatedWhen i back-up the catalogue, i assumed the backup would be mede of al the tags added to photo's. When i check the catalogue-files, i see a whole lot of jpg-files. My actual photo-collection contains jpg-, raw an avi-files.
I have a habit of making a copy of all my photofiles, but now it seems double
Question: Does de backup-function of photoshop elements 11 actually make a backup of tags and photo's?
is it possible to trigger an Autosave before executing my vb.net-code? I'm rather new to vb.netcode and in case of an unexpexted error AutoCad sometimes crashes. If I Could trigger an auto-save before the code is run, no information in the drawing is lost, but can be obtained in an autosave-file.
I cannot trigger a Save of SaveAs, because i don't know if the user wanted to save the drawing, for examples if the user reads an older drawing, removes/deletes objects etc, but is unaware of the drawing being saved, it could result in problems.
how can I prevent autosave from happening in the middle of a command. it is very frustrating and can potentially cause a crash (rarely though).
DO NOT TELL ME TURN OFF AUTOSAVE. I like it on, want it on and my computer has no issue handling it and it rarely crashes during.
I am a typer, so run commands very fast. I am seeing crashes right after an autosave, when I hit escape fast.
This never happened before, and does not happen on 2009.
Autodesk added the "intellisense" for commands in 2013.
This kind of instability is likely tied to that addition that we turn off.
Is there a way to completely disable the intellisense, like clearing the list of commands or something.
Sometimes when Autocad autosaves my dwg's, one of the dwg's replaces the other one. So I end up with two identical dwg's with different filename.
e.g.
Lets say I have two dwg's up at the same time, called "Car.dwg" and "House.dwg".
Sometimes when the autosave is finished it ends up with a car on both of the dwg, and the one that previously had a House drawing on it, is now a car with "House.dwg" filename.
We are having an issue with AutoSave we have it setup to save to a certain fold every 10min and it isnt' saving to the fold. It used to save just fine and all of a sudden stopped.
View 9 Replies View RelatedI was working away at a project when my hand braised the ALT button and something else , suddenly the command line started going wild with line after line after line of I don't even know what, then the window just closed. My Auto save is on and I've looked for the file with no luck. I've tried looking in the temp files and so on like every thing on the web says but nothing. 3 hours of work I am going to redo in the morning since I've been working for 13 hours straight now..
View 9 Replies View RelatedI have Autosave set to 10min and the file location D:/Autodesk/Autosave, file extension .ac$. I see the progress bar appearing at bottom left, so I know the function is active. I had a situation yesterday where I inadvertently closed a drawing without saving the changes and thought I would be able to at least recover up to the previous 10min by renaming the last ac$ as a dwg; but when I looked in the directory there are no ac$ files, only .bak. I have just checked now and there is one ac$ file - for the currently open drawing. Why aren't the ac$ files being retained?
View 9 Replies View RelatedI've been using Autocad 2014 for several months now, and I've noticed that every couple days or so it turns off my autosave. I can check the box to enable it, and set it to 10 minutes, and a couple days later it will be unchecked and say 0 minutes in the box. I don't know how often it happens, I know it takes more than one day, but it's really annoying and one of those things I usually only find AFTER I have a drawing crash on me.
Is this some kind of software or profile issue?
why i can set my autosave and autosave location and for the day it will stay on but sometime during the week it will uncheck by itself. could it be from a update?
View 3 Replies View RelatedMy co-worker is having an issue with re-pathing the autosave location.
When it is re-pathed there is an error that says:
'The directory specified for automatic saves must exist and have read-write permission. The value previously saved for the automatic save files will be used.'
The file that it is linked to was just created, and the user has full administrative rights.
In turn this effectively makes the autosave not work.
I'm weaning myself off of Adobe's PDFMaker and learning how to publish.
I've got everything working but I'm prompted at an Adobe prompt (Save PDF File As...) for every sheet
which is overwhelming when I have multiple drawings with multiple sheets.
I don't know how (or if it is possible) to make it just save to the default name and continue onto the next one.
My autosave keeps giving me this message when ever it goes to save. What does this mean?
View 9 Replies View RelatedI don't consider myself a minimalist in any way, but I like to keep my personal folders clean of any system files. I recently changed the path for the autosave-folder as it intruded my private work files. The problem is that even though I did change the path, every time I start AutoCAD a new 'Autodesk'-folder is created in my personal folder. It still contains the sub-level 'Autosave'.
View 1 Replies View Related2013 C3D crashes on me a little less than once a day. Fatal errors and recoveries are also quite popular. Today, the crash took Windows 7 down with it too - a rare treat.
I have Autosave set to 20 minutes and also have the box for creating a backup file with each save checked under Options > Open and Save.
When Drawing Recovery Manager opened today, the dwg I was working on says it was last saved over 1.5 hours ago. The bak file was last saved yesterday. Usually, there's a sv$ file, but not this time. The sv$ file is typically the most up-to-date file.
Shouldn't I see a "last saved" time and date of about 30 minutes ago for my dwg? Same for the bak file? Is there some other variable that I need to set?
C3D 2013
I want to set my autosave (In Options) at 30 minutes but it seems that my Civil 3d 2012 sets itself back at 10 minutes.
I even try to set it in the dialog box with SAVETIME command at 30 minutes but it gives me the a prompt telling that its been setted at 10 minutes.
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
If I have multiple drawings open in AutoCAD 2012 does the autosave function only apply to the current drawing open or does it apply to all drawings ?
View 2 Replies View RelatedI have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
View 3 Replies View RelatedIf created a scripted benchmark test that I've ran several times on two separate machines to collect some numbers. One located at each of two offices - at opposite ends of a WAN.
There is is one time duration that is way different... in looking at the two machines today I discovered that one machine has Autosave disabled and the other has Autosave set to 30 minutes.
Does Autosave run during a script? ... the script also runs lisp code... Does Autosave run during running lisp code?
I attached two external DWG using the add source drawings in map, then I queried a single drawing into my current drawing. Which I must admit was pretty cool. However know every time I save, autosave, or Publish I get the message below.
View 9 Replies View RelatedI just started learning LISP yesterday, as our office needs an autosave LISP. People have requested it and I have to do it...
How I wanted to do it:
The LISP will be loaded on every PC of every person with AutoCAD.
On startup "command_count" will be on 0
When using a command like plinie this happens: (+ 1 command_count)
Commands like zoom, undo etc will be ignored
When command_count reaches 20 it executes the qsave command
If using the qsave command it resets the command_count to 0
Thats my not working LISP atm:
(defun c:losave ()(setq command_count 0)(+ 1 command_count)(if command_count 10 "_qsave"));(if command "_qsave" setq 0);(if command "_zoom" (- 2 command_count));(if command "_undo" (- 2 command_count));(if command "_qsave" (* 0 command_count));(setq command_count (+ 1 command_count))
Is there anyway to get this? my computer tends to have issues with like, freezing at times, and ive lost a couple of things because of it. any autosave or recovery feature or plugin?
View 4 Replies View RelatedWhy does my Premiere CC take 20sec to do an autosave (after a render) while an ordinary save takes 8sec?
View 1 Replies View RelatedI want to turn OFF autosave. I cannot handle frequent interruptions while cloning, painting, ... etc. as PSP saves my large file every other minute!!!
I have looked at the AutoSave Preferences, and read the related HELP, but cannot turn Autosave off as documented. There is no check box next to the "Save edits ..." line in the Preferences --> Autosave Settings on the Adjust Workspace tab. My only option is to say OK or cancel. I cannot change anything!
I know Adobe hasn't seen fit to include an autosave function in any version of Photoshop. I consider that the height of arrogance and stupidity. Some will argue the time it takes to auto-save files doesn't justify it's inclusion. The time and effort in creating the work is equal justification for such a feature. Why should I have to remember to save every 10 minutes or so when I have no idea when the silly program will suddenly crash on me for no good or explained reason? Why should I be put through that kind of stress that will affect my creative workflow? As an alternative it would be helpful to find some third party software, plugin that would do the same thing. It would be good if it could be set to a timed response. An action might do it but it still require manual activation.
View 17 Replies View RelatedWe're using Premiere Pro Cc to edit a TV series, we went to save the project file and the application crashed, when we went to look for the project file, it's not there and the latest autosave file is three days old even though we've watched PP doing autosaves every 15 minutes. This happened a few months back and we lost the work. The only thing that may be relevant is that we're using a solid state drive, but it's always been very stable.
View 3 Replies View RelatedIs this the only place now? I thought it was available in Edit mode. What about all the people (and there are a lot of us) who only use Edit mode? Surely it was available in before the last service pack? Who has not installed SP2 know? We have this in all previous versions of PSP that I have used.
View 3 Replies View Relatedsetting up elements I cannot get back to the autosave files.
View 4 Replies View Related