I saved an acad file I was working on all day in version2011 as an Autocad2007 version and when it completed saving...all the lines in the model space were completely gone. Not a single line left. All paper space tags and labels were still there.
View 9 RepliesI must have hit some type of command on my keyboard but now my anchor points and intersect guides have disappeared that would normally appear when I roll my mouse over the anchor point or the intersecting paths. I have hit Ctrl + H as well as went to the menu manually and my edges are showing. How do I turn back on this ability to see my anchor points and intersecting lines guide in Illustrator?
I run on Adobe Illustrator CS5
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedWith all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View Relatedi am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
what I have to do, in AutoCAD, to make two center lines to intersect on lines and not on free spaces.
View 9 Replies View RelatedI know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
View 2 Replies View RelatedMy dwg Icon has disapeared
View 3 Replies View RelatedI want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies View RelatedIs there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
Installed Map 3D 2013 this week. Have been using it with no problems for a few days.
I occasionally turn the properties palette on/off. Now I cannot get it to appear at all.
I have a surface in Civil 3D which when I opened today is not displaying. All it shows is to border of the surface. I know the surface is there because it is still listed under prospector view and the points are still there. I have tried all the usual things; checked contour layers is on, checked contour interval etc.
[URL]
I was drafting away, and all of a sudden my crosshairs and pickbox disappeared. Once I move the mouse there's nothing in my drawing plane. I can type commands, and when I move the mouse up to the menu area I can pull down menus. I've opened up other drawings and the crosshairs and pick box are there.
What can I do to resolve this? Of course it happens during a deadline.
Using Autocad version 2009, windows 2007, Professional
A friend updated his 2013 AutoCAD software to 2014 and now his ribbon and workspaces(custom and default) have disappeared in his 2013 version
View 9 Replies View RelatedCivil 3D 2013.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
I just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?
View 6 Replies View RelatedI am new to Inventor after using Unigraphics for a while and finding the modelling side very similar so no problems there. the problems are starting when i am producing drawings.
I am trying to manually break a dimension extension line around an inserted symbol ( surface finish symbol) and can't figure this out. I have noticed that Inventor automatically break dimensions round other dimensions but is there a way to add a manual break?
Also is there a way to break a center-line round dimension text? i have added a picture with the problem.
I have a problem. When I use parametric dimensions in my existing drawing the dimension lines and arrows are there but the numbers are invisible. I can't see them. I have searched over much of the dimension style manager dialogue box and I can't find a setting that would change this (but I could have missed something). When I open a new drawing and draw a rectangle and add parametric dimensions they are visible and there doesn't seem to be a problem. What the hell is going on? (I have not used paramentric dimensions until just recently.) I am first going to the top view, with the z axis perpendicular to the page, before adding the parametric dimensions (in case that makes a difference).
I previously had a problem wherein an entire drawing I had drawn suddenly became invisible, except when the pointer was in certain places and then it was temporarily visible. But that problem was solved when I just shut down the program and computer and then restarted it all.
I've been trying to incorporate my menus and toolbars into the ribbon environment. I skipped acad 09 so this hasn't been fun. I used the transfer feature in the cui environment to get everything I wanted. I go to 2d environment to check that everything is there and it appears to be there. I load my cui and I get my icons and menus but no ribbon. I have a big message that says, "The Ribbon does not have any tabs or panels currently loaded." I type ribbon to load, but nothing.
I've now messed with this enough that even with the base acad.cuix file I still don't have the ribbons.
I have a layer VPORTS. I create viewports in this layer
On a 10 sheet drawing. viewports are visible and selectable on 9 sheets. Only one sheet they have dissapeared
I cannot select or edit vports on this one sheet
I have rebooted.. turned on and thawed all layers.. can see the viewports on sheets 1 thru 9 and edit them but not on sheet 10
I just popped off to a meeting, and when i returned the Object Browser has disappeared from my screen and i can't get it back. Where it might have gone or how i can get it back.
View 9 Replies View RelatedAll of a sudden I can't get up my frame generator. I click into my frame > hit "insert frame", which is normally where the dialog box comes up, but I get nothing.
Inventor Professional 2014.
Windows 7 64 bit.
My right click customization, which would bring up properties as an option, or could unlock a viewport by selecting it and right clicking. and can also select an x-ref to open, or edit in place, and modify attributes, etc.....has disappeared.
All I get now are basic pan/zoom commands, action recorder, clipboard, etc.....I checked my options, nothing has changed in my right click customization field, but for some reason, it's just not working. Any way to get that back?
After just installing 2013, I decided to change the screen appearance and move the command line into its traditional area at the bottom - I over dragged and it disappeared off the screen. I have tried CTRL+9 and using the Ribbon Commands and nothing seems to work.
I have looked at the Preferences and cannot find anything to indicate the commandline or how to customize with the exception of colour and text colour!! Where it has gone and how do I get it back?
My drawing just dissappeared while I was still working on it and when I try to recover the drawing file shows a blank page, I'm using an AutoCad 2013
View 3 Replies View RelatedThe tab parts only disappeared from the tabs in BOM.
How can I get it back? picture attached.