Not getting the whole unit "lit" up or when I finally do that, not getting the part to remove to "light up" in its entirety. Not sure if over writing a line is the problem or..........if I need to Pedit.......I don't know how to do that either and the purpose otherwise. My tutor is out of town.
I'm in 3D modeling, 2011, computer is handling this very well.
Illustrator keeps freezing when applying an effect such as texture-grain to a simple gradient, or even rasterizing a simple black circle. My system is about a 6month old macbook pro with 16gb ram, i7 and AMD Radeon HD 6770M 1024 MB. What could be causing this? It wasn't like this when i first started using the laptop but has started to do it everytime i try and do any of those simple tasks recently.
View 5 Replies View Relatedhow to cut those three portions instead of my full-section view.I have a dimensioning problem with this second radius which inventor refuses to create even it detects that it's a fillet feature. also how do I resize the dimension text.
View 3 Replies View RelatedI work in both metric and imperial dimensions. I specify european cabinetry, and most of the architectural drawings i receive are for US clientelle so they're in ft and inches. When dimensioning, it's important that the cm dimensions are accurate for the factory, but the inches are accurate for the contractors.
So my drawing had 1 plan and 4 elevations. All drawn correctly. All scaled together, never one at a time. Yesterday morning everything printed correctly with this drawing.
Randomly, after some very minor changes to the drawing, 1 elevation remained at the correct scale and the plan, and 3 elevations randomly scaled down and at different scales from each other. Also, when i plotted this to a printer it matched what was on the screen. When i plotted it to PDF immediately after, the PDF's reflected 5 totally different scales where all 5 drawings and didn't match the screen or print. For example: a cabinet height in one elevation was 87cm, the next 86cm , and the next 83.9cm. Printed to pdf at totally different dimensions (see attached).
The file was closed and reopened, and the plan, and 2 different elevations were at an even different scale, smaller scale than before. They more closely matched what I got when plotting to a PDF.
I purged, and audited (no errors found), I copied only the bare bones necessary info into a new document, and scaled everything by reference to the size it needed to be. Most of the drawing automatically corrected themselves to the correct dimensions with the one step.
However, certain lines on my plans scaled at a far greater scale, while one wall was accurate, and one wall was off just a fraction. So even though i selected the entire thing and scaled it up together, different layers scaled differently. Basically i had to redraw the plan almost entirely.
The same happened with 3 of the 4 elevations. One section scaled correctly, one section scaled more than it should have and made that portion off.
So i had to redo that elevation as well.I created guidelines and set them where they need to be to align every single wall and cabinet and locked the layer in the hopes that if things move again, the guides will remain.
This has happened randomly with drawings previously, but only by a degree of .1 to .3 cm. I figured this was from scaling the drawings and dimension accuracy. While that was annoying, it was minor. This time we're looking at 2-8 inches difference which can really mess up a job if unnoticed.
what could cause only portions of drawings to scale differently than the rest and at random times even when the scale command hasn't been used? And between closing a document and reopening it? AND from printing to a printer and to a PDF?
I am curious if it is possible to modify only specific portions of a surface? For example, I have recieved an xml surface representing FG for a project, and want to do an earthwork calculation, could I raise and lower only portions of the project say by using specific boundaries for the asphalt paving, concrete etc. and then implement the raise & lower surface feature for these portions of the FG surface.
At this time I have been creating multiple surfaces for each particular feature of the site, then paste the FG surface, add a boudary and lower appropriately. Finally, I have to go through and paste each particular feature and its small surface into one "subgrade surface" to get an accurate representation. This method results in countless small surfaces and alot of leg work for something that seems like it should be simple.
I know that the surface defentions (FL's or corridors), should they be provided, would make this easy, but there have been several occasions where these are not being made availble by the project sponsor.
We have a large AutoCAD file received from a survey company consisting of one large block that I want to explode and edit. When I attempt to explode it, a portion of it disappears.
This is the fifth version of the file that we have received. The previous versions did not have that portion at all, so we had to keep sending back for it.
What's been tried:
1. Turned on/unfroze all layers and zoom extents
- No change
2. Tried both Burst and Explode
- No change
3. Tried to copy/paste into a new drawing.
- "Copy to Clipboard Failed"
4. Inserted drawing as a block into a new drawing.
- The disappearing portion did not seem to be inserted along with the rest of the drawing
5. Attempted to edit the block.
- "This block contains proxy objects and cannot be edited in the Block Editor"
AutoCAD Version:
AutoCAD Map3D 2012
I have tried multiple types of hide boundaries,etc. for this, and cant find a solution. I'm sure it is very simple, but..
I need a corridor that transitions from 2% sideslope to 0% sideslope. This transition occurs in a horizontal AND vertical curve. I understand I could use EOP alignments, profiles, etc to achieve this. I dont have the time or civil3D knowledge to figure this out on a friday afternoon...
So... my plan is to not apply the transition, and just hide the contours in the transition area and sketch them in by hand. I want to corridor surface to remain so that when other profiles are created from this surface it is still somewhat accurate (instead of removing this portion of corridor surface, and adding simple contours to the surface). I just want the surface hidden for +/- 50'.
Everything I have tried hides the surface everywhere, including new profiles from the surface.
When I try and draw a polyline it keeps snapping to blue squares - even though OSNAP is off. It says they are a 3D vertex when I hold the cursor near them. How to turn these off? I am only drafting simple sketches and don't need any 3D capabilities.
View 3 Replies View RelatedI am editing this block of seating:
Seats.jpg
and I was just wondering if there was a way of reducing the distance between the squares in one go instead of doing it individually?
I would like to be able to draw squares by the area they should have. So that if I need a square of 50m2 autocad automatically draws a square of sqrt(50) x sqrt(50) Because right now I have to draw 200 squares with 100 different areas and I have to calculate and manually draw each one of them.
View 3 Replies View RelatedI took a photo of a shoe, which is black but has 2 small red balls attached to it. I wish to convert the whole photo to black and white but mantain the red colour of the balls. I was using the lasso tool to select the portion of the image i wish to put in b&w but it?s not pratical at all and didn?t work well! Is there an easy way to keep the balls intact while editing the rest of the photo to b&w?
View 9 Replies View RelatedOne of the designers at our office has problems with what I believe is a missing font. We tried to reinstall Inventor but it did not solve the problem. Then we reinstalled the entire machine but the problem came back.What is the name of the font used in Inventors menus?
Inventor 2010 Win XP 32
-------------------------------------------------------------------------
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
One of the computers running Inventor in my educational setting has all of the menus options show as squares. A screen shot is attached. In Application Options everything is set the same as the other computers and Tahoma is the font. Yet the menu does not appear as Tahoma.
View 1 Replies View RelatedI was unable to fully launch Autocad2010,2012 or 2013. It would almost deploy and then disappear from the screen.Autocad support yet unable to repair. Decided to uninstall and reinstall software. I now have software fully deploying but if you draw a square it views like a rectangle.
View 2 Replies View RelatedHas dealt with imaginary squares that don't show up until printing? I have some that show up everytime I print the sheets out. They are not visible until printing to plotter or making a .pdf. See attached example with red callout boxes.
Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000
I have just got done revising a business card that I have printed in the past. The Card was created in Photoshop Cs5. The strange issue is now when I attempt to make it into a pdf so I can combine it with the second side I am partially loosing some of the fills in the text. Here is a copy of the psd
Here is what the pdf looks like notice the missing red in vinyl and in the k of tick.This is what the settings are in the save as menu. The other odd thing is it looks ok if you view the pdf in photoshop but if you view it in Acrobat x professional it starts to lose it's fills.
Opening the images (.psd and .NEF) in camera raw presents no problems. The problem occurs when I then select OPEN to open them in Photoshop.
View 2 Replies View RelatedWhat is the best way to mix five different colors in equal portions and see what the resulting color is, as if I was putting 5 drips of each color into a container and stirring well.
I have tried the smudge tool and placed the five colors abutting each other, but there has to be a better way.
I seem to be having this issue with rendering in Max. I play this game called SimCity 4 and have a special user-built script for 3ds Max that allows exporting models made in Max into the game after a few steps.
The script basically sets up Mental Ray and some camera/light rigs to mimic realistic sunlight. In this image you can see the problem pretty obviously.. In some areas it looks like there is coplanar geometry, and i've double checked to ensure there isn't. Some objects have complete portions of the geometry missing, such as the roof.
[URL].........
In an image of a woman, I want to move her arm position by lowering it. How do I do that?
Attached Thumbnails
Basically, I'm using another program (Axograph.X) to export a graph as a .svg file. When I open the graph in illustrator, lart portions of it are missing. I'm not getting any error message; just white space where there should be data points.
The problem isn't with the .svg file itself; the everything is displayed properly when I open the file in Firefox (20.0.1) or Internet Explorer 10.
I only just got photoshop yesterday and I barely know a thing but I have got an image with 3 layers and I want to make it into a simple animation, displaying each layer in turn.
I am a novice user using C2
If I start autocad and draw a line then change its linetype from continuous to Fenceline2 it shows up like it's supposed to, a line with small squares in it. I can also change it's linetype to Fenceline1 and the linetype shows up just fine with the line and small circles in it.
But when I call up some existing autocad drawings that have lines with the Fenceline1 or Fenceline2 linetypes assigned to them, the small boxes or circles are missing from the linetypes. When you type linetype at the command prompt the linetypes are listed in the dialog box, but for some reason they are not showing up right in the existing drawing. When I type linetype, and hit the load button, and browse to my acad.lin file and select it, I get an error message of Bad Definition for linetype Fenceline1 and another for Fenceline2 and another for Batting etc.
So why are these Complex linetypes not working in the Existing drawing but work fine in the just call up autocad empty drawing, and how do I fix them to work in the existing drawing?
How would I create a pyramid where the base and top are rectangles not squares?
View 6 Replies View RelatedI have autocad 2012 LT.
My colleague has made xrefs for the first time. She can edit them - no problems. When I try and select a line the whole plan is selected with blue squares, then crashes. Its like it is locked. I have tried:
* updating all service packs
* edit in place
I do not know how to edit anything in the xref file.
I want to reduce the length of the legs a bit and straighten the back one out a bit.How can you go about this without changing a lot of the anchor points? Is there a way to select a portion of the leg or image and move it separately?
View 3 Replies View RelatedI make a duplicate layer of a car photo and use the solarization tool and then erase the portion of the car I want to be in color.
View 6 Replies View RelatedMaking certain portions of an image glow. Because I am the most artistically capable of my peers, I was chosen to make a section T-shirt for my school's band's saxophone section. I have the front done, but to do back. The idea is have a slightly obscured saxophone with the key holes and bell glowing. Thing is, how to do it. I tried messing around with the glow effect in version 3.5.4, but that affects the entire images.
View 1 Replies View RelatedURL....I need to be able to fill the white portions of this text/font..With a reddish color.But I need to remove the background piece surrounding the letters, and have, this:
Which was done in photoshop using the shape tool for the fill behind the text, then I selected the text area and hit inverted selection, and deleted the selection from the shape/fill layer.I've been playing around with pathfinder for a bit and can't get what I want.
I am fairly new to autocad - sometimes when I draw a rectangle little grey squares appear with red and black diagonal lines in?
What are these and how do I toggle them off and on?
I have a screenshot
I am trying to put an angled border around a straight picture and remove the portion of the picture outside the border.
I can't figure out how to remove the portions of the picture which fall outside the border.