[URL] I have an instrument drawing with 3d and hatch meshes and some lines. When I render the image the lines and meshes I have do not show up. is there any way to fix this? I know rendering is only for 3d objects (now that I have read up on it) but what about the lines in a drawing that you need to see in the final image?
View 9 Replies
the bugginess of Photoshop 64 bit CS6 Extended 3d (v13.0 x32 -- no updates since launch??) on a Windows 7 x64 workstation. It constantly crashes, renames my layers, and scenes will suddenly go into the netherworld requiring a PS restart.
However, after spending hours assembling a scene with just 3 simple postcard meshes, I can no longer affect the meshes' coordinates or sizes either by dragging or typing in numbers in to the properties panel -- after attempting a move, it shows the busy cursor for a second or two and then puts the mesh back where it started. To add insult, it adds an undo state to move the mesh back! I tried restarting PS to no avail.
I hesitate to re-assemble the scene with a new file if this is a common occurrence.
I'm busy making a map during which I've been working with creating a line around the shape of the island and then converting it to a editable mesh. On 55 lines it worked, then on 4 it didn't. Turning them into an editable mesh gave me nothing. I don't believe I did anything different with them, though I might have set 1 point or so differently.
View 3 Replies View RelatedI recently invested in CS6 Production Premium and I've just tested legacy support by saving an Illustrator CS6 image in CS4 format.
The image contains a number of semi-transparent gradient meshes used for highlights.
Having loaded the saved CS4 .ai file in CS6, white lines appear along my semi-transparent gradient meshes (see the attached screenshot).
What's happening is that the anchor points with 0% opacity in CS6 suddenly have 100% opacity when I load the saved CS4 files in CS6.
Is this a known error? If so, how/where do I report it?
Here are the relevant CS6 and CS4 files: [URL] ....
There are no white lines when I save the image in CS5 format and load it in CS6.
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
I have a hdri image in the environment map slot that I want to use for illumination and reflection purposes but I don't want it to show in the actual render, is there a way to do this? I've tried adding the hdri to a skylight but it doesn't give the reflections. I'm using mental ray by the way I know in vray you can use a map for overall reflections and one for overall GI is there a similar way for Mental Ray?hide in actual render?
View 1 Replies View RelatedI am trying to throw a screen shot up onto a TV model to make my rendering more fun and I can't get it to work right!!!
I duplicated one of the standard plastic materials in Revit's lib and replaced the color with a cutom image (first tried jpg then png). I had to tweak the transforms to get it to fit the screen. Looks great in the camera view but when I render the transforms are off.
Here are some images to illustrate the issue.
I want to show only a few hidden lines in a drawing view.
I set the view to show hidden lines, then i attach a sketch to the view and project the hidden lines that i want.
But when i put back the view to hidden lines removed, the lines on the sketch disappear as well
All lines in model space appear thicker when I zoom in.
how to change this behaviour so they show the same weight thin in the computer window?
I've create drawing in model, after design I arrange it in layout tab. Once after finish, I want to print it but in print preview there are some lines show up direct to bottom right of paper. I look into drawing, there are not lines, I check there are no layer turn off
View 1 Replies View Relatedlts.jpg what is the LTS scale factor or value to set at for paper space scale 1/8"=1'?, the hidden lines show on Model space but one paper space they show as continious lines, this is not the first time that i came across this issue. (note: when i typed LTS in CAD it said ENTER NEW Lts scale factor <240>
View 9 Replies View Relatedis there a way to only show hidden lines on a shaft with a hole in it to only show quadrens instead of 30 lines around the arc.
View 9 Replies View RelatedI want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies View RelatedThe above sums it all up. Note the properties are NOT GREY they are what they are supposed to be.
The file was created in version 2012 by another designer now it is being completed in 2013 by myself.
I can do a quick fix by creating a wblock of the problem lines and text etc to enable a print out without the GREYING
problem but once the drawing is closed and opened once again the drawing has GREYED whatever is in model space again. (note that xrefed lines etc are fine)
Ps I have attached the problem file with all the xrefs and jaz unattached/taken off etc
If Inventor 2010 has the capability of showing certain parts/sub-assemblies in phantom style lines on the idw/dwg file?
I have a box unit, where I want to show the base, but with the posts meeting it in phantom. Then when I do the drawing for the posts, I want the base and roof in phantom. Then when I do the roof drawing, I want the posts in phantom again.
I can't change the BOM level as it will apply to every level of detail. when suppressed, they completely vanish. Is there a way to do it rather than find the parts in the browser (whilst in the drawing) and change the properties (over-riding them)?
At the begenning I was thinking that it was just to RMB and select show hidden edged in my drawing but in fact not.
The model look like this :
And in the drawing I have some missing lines :
I tried to display the missing part in a separate drawing and it's OK.
I use Inventor 2011.
After a slice operation i have to make a sketch and complete lines.
For example, if i slice in the middle of a threaded hole, in the slice i don't see the thread lines, i just see as if there was a hole.
I need to clip the grid lines at a certain station, but still show the information beyond. The Engineers here got quite comfortable doing that with Land Desktop, and we haven't found a solution to do this with Civil.
I know about clipping the grid (under Profile View Properties), but the ditch (for example) clips to that same station. I need to show the information to the start/end of the survery without grid lines.
Right now, our solution is to draw line over top of the grid lines, and make those lines print white. Therefore, covering up the grid lines underneath.
Using Civil 2011 and running Windows 7.
I cannot get my dashed lines in my model space to show up dashed in my viewport.
I already tried MSLTSCALE = 1 in model space and PSLTSCALE = 1 and LTSCALE = 1 in paperspace.
it did not work.
there is already a style set from the file i'm using, when i am trying to get the measurements from the line to show up, they aren't doing so. how do i get it to show the lines when i modify the text and make it become visible?
View 3 Replies View Related“Scale lineweight” issue. When plotting in the office to A2 Printer I usually check the “Scale lineweight” checkbox. In some drawing “Scalelineweight ” does mess with the lines scales showed in the preview and on the paper. why?
View 1 Replies View RelatedI have created a road for a pit mine (which is unlike roads I have designed in the past). The road switched back towards itself and I need to daylight the cut slopes to show the limits of the mine/road cut. However, my cut/fill lines are not showing up in my cross-sections, but the plan view is showing the limits of excavation.
I assume this is because my limits are intersecting, from each of the roads, the upper and the lower. How can I get around this, or why are my cross-section lines not showing?
I saw some years ago a 3D drawing where hidden lines were dashed after hide command. I tried to find out, how it was made, but nothing. Today I need this solution, but I can't find information, how is it possible.
View 2 Replies View RelatedI can't remember the option how to change the display of linetypes to show as solid instead of as two lines. I think this may be something to do with the 'solidfill' option.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
i have a long alignment going through a lot of creeks. right now the creeks are in xref just polylines but it intersect with alignments at areas.
is there a quick way to show all these lines on profile for design and drafting purposes? ideally want to just show a line at each intersection would be fine.
tried using pipes takes too long to set up. this is one important feature to have in the software.
i can program it again but i have not enough time to finish this project by mid october if i keep programming things.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
recommend a good way to indicate the location of cross section sample lines in a profile view (of same alignment) as vertical lines? the sample lines have been created at user defined locations from polylines, and do not follow a particular station order. my first thought was to use transparent command to draw line in profile view using station from plan view, but i have in excess of 100 cross sections, and that may be time consuming.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
For some reason, the line tool in Photoshop will not show up. Whenever I draw a line, the outline shows but it doesn't seem to fill with the selected color. That is, I've got black as the foreground color, the line is set to 1 px, but when I draw it,
I can see right through that temporary shape outline that Photoshop displays until you do the next action. When I draw the next line, the first line is simply not there (no line, and no shape outline). Does anybody know what might be going on here?
In the sample file, RAC Advanced Sample File, there is an entry canopy. It is constructed as a generic roof placed on level 2.
I noticed that on the first floor plan, this roof slab shows as dashed lines. How is this done? I tried copying/duplicating this roof, but dashed lines do not show.
I have created a 3d model of a football stadium, but when I try to render it, it comes up with this message and it cannot render the scene. I've tried everything I can to fix it, but nothing has worked.
View 9 Replies View RelatedI am having a problem with the show hidden line command, because when used in the project I can see dashed lines and continuous lines. I was looking for how to manage the line pattern in this command but there is no way to do it.
See the attached image of my problem.
I drew a solid model of a structure in Autocad 2010. By using that model, I want to make a FEM analysis in Sap2000. The problem is that Sap2000 takes only polygon meshes (not solids) in 3d. The question is that how can i make a group of polygon meshes of the solid model that represents the structure.
(Since i am not an expert of Autocad, i will be glad if the solution is explained in a simple language.)
