AutoCAD Civil 3D :: Lines Show Up As Foggy Grey But Don't Have That Property?
Oct 2, 2012
The above sums it all up. Note the properties are NOT GREY they are what they are supposed to be.
The file was created in version 2012 by another designer now it is being completed in 2013 by myself.
I can do a quick fix by creating a wblock of the problem lines and text etc to enable a print out without the GREYING
problem but once the drawing is closed and opened once again the drawing has GREYED whatever is in model space again. (note that xrefed lines etc are fine)
Ps I have attached the problem file with all the xrefs and jaz unattached/taken off etc
View 9 Replies
ADVERTISEMENT
Oct 25, 2012
I draw property plats for a surveyor and looking for a way to add the bearings (for example: N 56 15' 32" E) along the property lines. Right now, I use the Distance command to find out the bearing, write it down, and then add it to the aligned linear dimension text. I'm guessing there's a faster way to get a bearing along with the distance without typing it in.
View 2 Replies
View Related
Mar 17, 2013
I am using AutoCad C3D. I have drawn a building and now I am trying to position the building on a plot with uneven property lines using only “tie distances” from the spots on the property to specific spots of the building.
I do not know which C3D program functions (with just distances known) to get the building placed properly on the plot.
View 9 Replies
View Related
Feb 29, 2012
I need to clip the grid lines at a certain station, but still show the information beyond. The Engineers here got quite comfortable doing that with Land Desktop, and we haven't found a solution to do this with Civil.
I know about clipping the grid (under Profile View Properties), but the ditch (for example) clips to that same station. I need to show the information to the start/end of the survery without grid lines.
Right now, our solution is to draw line over top of the grid lines, and make those lines print white. Therefore, covering up the grid lines underneath.
Using Civil 2011 and running Windows 7.
View 1 Replies
View Related
May 1, 2012
I have created a road for a pit mine (which is unlike roads I have designed in the past). The road switched back towards itself and I need to daylight the cut slopes to show the limits of the mine/road cut. However, my cut/fill lines are not showing up in my cross-sections, but the plan view is showing the limits of excavation.
I assume this is because my limits are intersecting, from each of the roads, the upper and the lower. How can I get around this, or why are my cross-section lines not showing?
View 2 Replies
View Related
Sep 28, 2012
i have a long alignment going through a lot of creeks. right now the creeks are in xref just polylines but it intersect with alignments at areas.
is there a quick way to show all these lines on profile for design and drafting purposes? ideally want to just show a line at each intersection would be fine.
tried using pipes takes too long to set up. this is one important feature to have in the software.
i can program it again but i have not enough time to finish this project by mid october if i keep programming things.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 6 Replies
View Related
May 15, 2013
recommend a good way to indicate the location of cross section sample lines in a profile view (of same alignment) as vertical lines? the sample lines have been created at user defined locations from polylines, and do not follow a particular station order. my first thought was to use transparent command to draw line in profile view using station from plan view, but i have in excess of 100 cross sections, and that may be time consuming.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
View 2 Replies
View Related
Jan 2, 2013
i use inventor 2012 and Vault Collaboration 2012.
for file naming format i use numbering scheme rule.
in the vault browser is eazy to show the description from each part, search by description etc.
but when ia want to select from inventor, for example i want to replace component from vault or add component from vault. i can't see this description.
my question is, how to show the description in the file browser from inventor?
View 1 Replies
View Related
Jan 26, 2012
Im trying to plot my drawing from AutoCad 2012 - DWG to PDF format. The problem I have encountered is that when the pdf is created, it has some of the lines in grey which they werent in AutoCad whatsoever. When I zoom into the lines on the pdf, these lines turn black as should be and appear normal. why this is happening and how I can create a PDF where the lines will stay black.
View 9 Replies
View Related
Apr 7, 2010
Only happens on angled or curved lines like this.
Why does it do that? And how do I change it to all black lines?
View 9 Replies
View Related
Dec 16, 2011
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
View 2 Replies
View Related
Jan 23, 2013
I've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%. Is this a 'bug' or is there a fix for this problem?
View 6 Replies
View Related
Jan 23, 2013
I've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%.
View 9 Replies
View Related
Jul 24, 2013
I have few text labels and lines in a drawing that supposed to have black color.
However, color at some point changed to grey.
Color- by layer, transparency- by layer, viewstyle- 2D Wireframe...
The thing is if I double click on a text it turns to black but after regenall it turns to grey again!
Already did restart and everything. Looks like there is maybe some variable for color control, I don't know.
View 5 Replies
View Related
Apr 9, 2013
Im trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies
View Related
Jun 18, 2011
the grey or coloured lines on screen are plot in black, even in the pdf preview. How can I obtain the chosen colours?
View 3 Replies
View Related
Oct 5, 2013
I am fairly new to autocad - sometimes when I draw a rectangle little grey squares appear with red and black diagonal lines in?
What are these and how do I toggle them off and on?
I have a screenshot
View 2 Replies
View Related
Dec 26, 2011
When I import images I cannot see them in the previews. I have set 1:1, standard, and minimal but it makes no difference. The images show as grey in the preview. When I go to the develop modual I can see the image I select but if I select another image the first goes gray again. For some reason I cannot render previews. Have I turned something off or on? Can I render previews after importing images? The files show up as DNG in my hard drive.
View 3 Replies
View Related
May 4, 2012
when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
View 1 Replies
View Related
Feb 12, 2013
Is there a way to control which of two 'Graphic Property definitions' are used via a formula property with a IF, Then, condition statement?
View 3 Replies
View Related
Jan 25, 2014
new to PaintNet. I have a Hex Grid PNG file where the Hex outlines are in a shade of grey. I want to "recolor: the grey lines black. Thought the RECOLOR tool would do that but I can't seem to get it to work. The Hex grid PNG is attached to this post.
Attached Thumbnails
View 13 Replies
View Related
Apr 26, 2011
I am making a logo in paint.net and I have text and some lines drawn, when i use the eraser it deletes and shows the grey checkered squares BUT when I save it there is light grey for where the eraser has been 'erasing'
I have white for primary and secondary and opacity on full.
View 4 Replies
View Related
Aug 25, 2011
I have two related properties... One is a formula property, the other is a manual property.
In the formular property I'd like to set the value of the manual property.
View 1 Replies
View Related
Jul 4, 2011
Is there a way to show the page border without the grey shadow, just a thin black line?
View 11 Replies
View Related
Sep 17, 2013
When I pick a feature line, the property dialog would show Feature line, and list the information.
Now for some reason, I get aecc_feature_line and the property dialog shows a different list of information.
How do I get back to the Feature line list.
View 9 Replies
View Related
Apr 22, 2005
I want to apply some foggy efect to peoples portraits , to look softener (like old pictures efect).I want to apply such a filter at the end of retouching peoples faces.
View 2 Replies
View Related
May 14, 2012
I have a bunch of GIS points that have been inserted into a drawing. All the points have data associated with them, gpm values, that I would like to make more clear. Is there a way to filter and color code them with out doing it by hand?
View 3 Replies
View Related
May 13, 2013
I am having trouble with my display I can get autocad to display my property box for subassembly I have all my locks turned off for lock location setting and when I want to insert a sub assembly the window will not pop up and I also notice that when I pick a entity in my drawing my layer to that object will not become active in my layer tool box.
View 2 Replies
View Related
Apr 21, 2013
I am working in Illustrator CS6 on a Mac (10.7.5) and on some (but not all) of the objects in my document, the paths (not strokes) are visible as light grey lines. This occurs in objects that are stroked, filled or both. I can make a stroke thicker, but the 'path' is still visible in the center of it. The Appearances panel gives no indication of what's going on.
View 3 Replies
View Related
Jul 25, 2003
how to make a effect of foggy glow looking landscape picture. I tried the guassian blur with gradien fill, but not quite the same as I wanted. I wonder if PH can do the job with buying the other plugin filter.
View 9 Replies
View Related
Nov 24, 2012
First off, I am in RGB mode, with Photoshop Elements 6. I am trying to fill in an area of the business center (the building on the left) in my drawing but it is going over both the door lines and the text on the building. With the student center (the building on the right), it does the same with any of the grey lines (but not the text). And this is all under one layer (They used to be made up of multiple layers but were merged into one). What should I do? Here is a picture of it down below:
View 2 Replies
View Related
