I am making a logo in paint.net and I have text and some lines drawn, when i use the eraser it deletes and shows the grey checkered squares BUT when I save it there is light grey for where the eraser has been 'erasing'
I have white for primary and secondary and opacity on full.
Every time I use the paint bucket on something, it always leaves a small grey outline on the edges. How to get rid of that?
View 3 Replies View RelatedI am using illustrator cs6 and whenever i try erase paint lines it leaves a thick black ouline of where i erased, i have seen a few posts with the same problem but no solutions. Is their any way to fix this issue or change the settings of the eraser?
View 3 Replies View RelatedI am using the threshold tool to create a stencil. I first used the Quick Selection tool to cut out the objects I wanted and then tried to use the Threshold tool to create a black and White Only image.
However, for some reason, especially on the edges of the objects, the threshold tool left some grey marks, instead of black and white.
I tried using the threshold tool again, but not all of the grey marks were removed
Just grabbed Scott's book from amazon and can't wait to get a better understanding about some of the tools I've been using. In the meantime I just noticed that I have some white trails or fine lines in an image I'm working on that appear after I have been moving things around and deleting sections etc.
It's no problem on a little image like this to run around with the brush to tidy it up and then fill white/transparent, but I'm wondering if there is there a setting or an order of working that avoids making the lines in the first place?I have filled the background in black to show the trails...
way to get rid of the two gray boxes the slice tool leaves behind?
View 1 Replies View Relatednew to PaintNet. I have a Hex Grid PNG file where the Hex outlines are in a shade of grey. I want to "recolor: the grey lines black. Thought the RECOLOR tool would do that but I can't seem to get it to work. The Hex grid PNG is attached to this post.
Attached Thumbnails
i made a animated Gif (Gimp 2.8) but there is something wrong.
i made an escalator with 2 persons on it, they move up the stairs in 12 steps.i made 12 different .XCF's for every step one.
Before converting to animated gif i make the XCF's 1 layer each.when i use the option FILTER > ANIMATION > OPTIMIZE (difference)the animated gif leaves black lines when the persons move (see picture attachment) the export file is very small so that's ok
When i use FILE > EXPORT > (=export as a animated gif) with the option delete previous frame, then the animated Gif looks fine. but the size is 5x bigger than when converting the first option ( i understand why)
how get rid of the black lines ??
I've got a problem with the combine shapes > slice (cut) shapes. (Designer Pro X).
I often use this tool to cut a graphic to make a repeating object, so I don't want it to have any boarder, just solid color. But for some reason when I cut the shape xara puts a little (approx 1 pixel) transparent line where the shape has been cut. This is often added to exported to the edges of pngs and svgs and looks a bit like anti-aliasing of some sort but I don't want this, just a solid object.
How to avoid this? See my attachment for an example png that I created by simply slicing one rectangle from another, I want to be able to do this without the extra line appearing - ie just solid black.
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View RelatedI am creating an image, mostly text and color. I want to create words with letters that have been turned cw and ccw, alternating. After that, I plan to flood fill the words. Unfortunately, I get some white inside where I flood filled.
View 14 Replies View RelatedI just got a new computer (Windows 7) and I don't like the default "Paint" program that comes with it. I've been using the Windows XP paint program for a long time and Paint.Net was the closest thing I could find to it.
I don't use Paint to edit photos or create super detailed artwork. I use it to draw little things (the image size is usually 50x50 or 100x100 pixels) and zooming in to 400%-800%. I've used paint.net a few times but I was wondering if there was a place in the program that would let me set preferences. It would just save a little time making it more convenient and less frustrating.
These are the things that I would like to change:
1: When moving a selected item it automatically leaves a "checker board" pattern on the image. It's relatively easy to fix with the "Paint Bucket" tool. Though if there was an option to make it only leave the default area white it would be a time saver.
2: When moving a selected item it will automatically replace the image beneath where you place it. In the Windows XP program there was an option to either replace an image or to replace all other colors except white (255green+255red+255green on the custom color spectrum). Is there an option like that in this program?
3: After moving a selected image (using the "rectangle select" tool then the "move selected pixels" tool) is it possible to simply de-select the selected image without having to click on the "rectangle select" tool and right clicking? In other words, being able to move an image, deselect the image, then automatically return the tool to "line" tool?
4: While using the "Line/Curve" tool the 4 click and drag points automatically appear on it to make it "curve-able" so is there a way to just leave it as a solid line without those 4 selectable points appearing?
5: Is there a way that I can make "Line Tool" my default cursor instead of pencil?
Im trying to plot my drawing from AutoCad 2012 - DWG to PDF format. The problem I have encountered is that when the pdf is created, it has some of the lines in grey which they werent in AutoCad whatsoever. When I zoom into the lines on the pdf, these lines turn black as should be and appear normal. why this is happening and how I can create a PDF where the lines will stay black.
View 9 Replies View RelatedOnly happens on angled or curved lines like this.
Why does it do that? And how do I change it to all black lines?
Can there be an square eraser ? Sometimes, when I do erase, being that its circular, doesn't matter the size, its harder for me to edge out the straight lines, especially the corners, leaving me with a "dent" in the pic.
View 7 Replies View RelatedIs it possible to change the checkerboard that appears when using the eraser to something closer to the dominant background - I usually work with a white "canvas" and the checkerboard is very distracting.
View 5 Replies View RelatedI'm often creating pixelart pics with transparent background using Pencil.. if as a secondary color would be an eraser (left click = drawing, right click = erasing). Is there such thing possible?
I can set some color and using Magic Wand (0 % tolerance) remove it or switching between pencil and eraser by keyboard, but - you know :) it's not so fast 'n' convenient. I tried to search for it here, but I guess I don't have correct keywords..
how to turn down the opacity of the eraser?
View 5 Replies View RelatedI've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%. Is this a 'bug' or is there a fix for this problem?
View 6 Replies View RelatedThe above sums it all up. Note the properties are NOT GREY they are what they are supposed to be.
The file was created in version 2012 by another designer now it is being completed in 2013 by myself.
I can do a quick fix by creating a wblock of the problem lines and text etc to enable a print out without the GREYING
problem but once the drawing is closed and opened once again the drawing has GREYED whatever is in model space again. (note that xrefed lines etc are fine)
Ps I have attached the problem file with all the xrefs and jaz unattached/taken off etc
I've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%.
View 9 Replies View RelatedI am working in Illustrator CS6 on a Mac (10.7.5) and on some (but not all) of the objects in my document, the paths (not strokes) are visible as light grey lines. This occurs in objects that are stroked, filled or both. I can make a stroke thicker, but the 'path' is still visible in the center of it. The Appearances panel gives no indication of what's going on.
View 3 Replies View RelatedComparing X3 and X4 ...
Is there no way to use the eraser (or delete selections) on adjustment layers? I do/did this routinely in X3. I have missed some sort of configuration setting in X4!?
I'm using a Wacom Intuos2 tablet with GIMP 2.6.12, and it works fine except as the subject says, the eraser works like a brush. In Photoshop, I don't recall exactly what it does, but I believe switching to the eraser (meaning flipping the pen over to the "eraser" side" switches from the foreground color to the background color, so that it effectively works like an eraser.
How can I do that, or something similar, in GIMP? I've searched everywhere and most of the posts have to do with getting the tablet recognized (check) and implementing pressure (check).
I have few text labels and lines in a drawing that supposed to have black color.
However, color at some point changed to grey.
Color- by layer, transparency- by layer, viewstyle- 2D Wireframe...
The thing is if I double click on a text it turns to black but after regenall it turns to grey again!
Already did restart and everything. Looks like there is maybe some variable for color control, I don't know.
Im trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies View Relatedthe grey or coloured lines on screen are plot in black, even in the pdf preview. How can I obtain the chosen colours?
View 3 Replies View RelatedI am fairly new to autocad - sometimes when I draw a rectangle little grey squares appear with red and black diagonal lines in?
What are these and how do I toggle them off and on?
I have a screenshot
First off, I am in RGB mode, with Photoshop Elements 6. I am trying to fill in an area of the business center (the building on the left) in my drawing but it is going over both the door lines and the text on the building. With the student center (the building on the right), it does the same with any of the grey lines (but not the text). And this is all under one layer (They used to be made up of multiple layers but were merged into one). What should I do? Here is a picture of it down below:
View 2 Replies View RelatedI've converted hundreds of photos to B/W and used the eraser tool or masking to bring out the color detail from background.
I received one last night exactly the same image information that was on the other files. It was taken from my daughter's cell and previous pictures she sent never had a problem.
.jpg
72 PPI
RGB-8bit channel
Duplicated the background converted it to B/W in the Effect>Photo Effects>Black and White Film Clicked on eraser and instead of my daughter's white teeth there was an orange transparent area where I erased.I tried masking with the same effect.
I have a jpeg of two people standing in front of some foliage. I want to use the background eraser to remove the foliage.The tool removes most of the foliage but leaves small unerased areas all over. I have to go over it many times to remove everything which takes ages.I am using the default settings for the background eraser tool. The only setting I have changed is the size (to 150).It certainly does not seem as easy to use this tool as the Corel tutorial on background removal makes it seem!
View 6 Replies View Related