Comparing X3 and X4 ...
Is there no way to use the eraser (or delete selections) on adjustment layers? I do/did this routinely in X3. I have missed some sort of configuration setting in X4!?
I'm using 3-5 adjustment layers on some of my work. Even though I have larger files, without Adjustment layers, once I add an Adjustment Layer to ANY piece of work things slowdown big time. For example a 'normal' curves application is almost instant. But if I add a curves Adjustment Layer then what took 1-2 second takes 10-15 seconds using an Adjustment Layer.
So is there something that Adjustment Layers are doing that is a computer hog? Or am I overlooking something? Or are they just configured in such away that they are naturally slower? [URL]....
In PSPx2 I used to select an area in an adjustment layer and then use the Flood Fill tool to create a mask. Did it quite often.
In PSPx4 the Flood Fill tool doesn't seem to work on adjustment layers. I can get the desired effect using the Airbrush, but it's a tedious and imprecise technique. Is this a known bug (I searched the forum but couldn't find it) or an intentional change?
I'm not sure if this is an intended feature of PS, but I have relied on it heavily in the past and now I can't get it to work any more!
Basically, when optimising photos, I will make an adjustment layer, levels, curves, whatever, which will globally alter the image.
I forget why I tried, but I found that using the eraser to erase parts of the adjustment layer would reveal the original state beneath, enabling me to make subtle tonal adjustments by feel. Sure there are many ways to achieve similar results with layer masks, history brush, whatever, but this method suits my way of working and is so simple.
Problem is, it won't work any more - nothing to do with updating PS as I have been using CS since it came out.
Messing with layer masks has sometimes brought this feature back, sometimes not, but unfortunately only temporarily and I can't work out what I did anyway!! When it does work, you can see the erased parts in the layer thumbnail and of course in the history palette, but when it won't, you still see the erase step in the palette, but nothing happens to the image.
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View RelatedI've converted hundreds of photos to B/W and used the eraser tool or masking to bring out the color detail from background.
I received one last night exactly the same image information that was on the other files. It was taken from my daughter's cell and previous pictures she sent never had a problem.
.jpg
72 PPI
RGB-8bit channel
Duplicated the background converted it to B/W in the Effect>Photo Effects>Black and White Film Clicked on eraser and instead of my daughter's white teeth there was an orange transparent area where I erased.I tried masking with the same effect.
I have a jpeg of two people standing in front of some foliage. I want to use the background eraser to remove the foliage.The tool removes most of the foliage but leaves small unerased areas all over. I have to go over it many times to remove everything which takes ages.I am using the default settings for the background eraser tool. The only setting I have changed is the size (to 150).It certainly does not seem as easy to use this tool as the Corel tutorial on background removal makes it seem!
View 6 Replies View RelatedSince I first upgraded from PSP X3, 5 months ago the eraser tool has worked great. But just in the last week I have been having problems with it not working correctly. It seems like it is faded and not erasing like it should. The hardness IS raised up to 100 but still no luck. The background eraser is working great, it is only the eraser tool that is acting up. Here is a screen capture of what it is doing.
View 8 Replies View RelatedI have searched google, PDN, and hades for a solution.
I am fairly new to PDN but love it so far.
I am creating a logo for my company and wanted to "cut" an object in half and place a saw blade in the middle (to give to appearance that it was cut). I thought about duplicating the layers, placing them apart and using the eraser or brush to give a jagged look?
Attached Thumbnails
PSP is and has always been THE best graphics app with a truly intuitive interface and useful set of features & tools.
I have been using it for many, many years... sniffed around other products, but always returned, fully satisfied with what I can achieve. I've also written a suite of scripts to further enhance my use of it alongside my photography hobby.
HOWEVER... since Corel took it over and the start of the X series, there has been a serious and very annoying omission concerning the Crop tool. Previous versions up to v9 allowed the user to grab hold of the edges of the crop box ANYWHERE along ANY side, and drag/extend/reduce the size of the box. This allowed us photographers to zoom in to pixel level and grab any part of the visible box to adjust the crop dimensions very accurately. This is a very important feature for photographers.
The new X interface has changed the crop box to 'vector node handles' only for adjustment, which are not always visible when zoomed in. This means that instead of being able to align the box accurately to an image feature or row of pixels, you have to zoom out until you can find the nearest handle to use, or scroll up/down left/right, which either takes you away from the area you want to work on, or zoom too far out to see the detail you want for alignment.
option/preference to ditch the vector handles and grab the sides as before. I know you may think it a backward step, but you've taken away the very function that photographers need for cropping a composition, which is available in other products.
I bought PSP about a year or so ago, but grew frustrated with it and reverted back to Gimp. Now, however, I think I am ready to jump back.. and I encountered originally back then.
Basically, in some of the adjustment layers (Local Tone Mapping, Fill Light & Clarity) the mask doesn't work. When I click on the mask control the mask color in the dialog switches from white to black, but the screen doesn't revert back to underlying layer.This is very repeatable. It only happens in some AL, others like Layers and Curves work reliably.
I am on W7 x 64, PSP X4 v 14.2.01
Not sure why but, none of my presets on the right-hand side pane is showing up. How do I fix this without (i guess) re-installing PSP? I've included a screen capture below.
View 2 Replies View RelatedEvery time I use adjustments like brightness/contrast, PSP seems to remember those settings, because the next time I use them, they start with the same values as I used before. But I do not want that. This way I always have to move all sliders to their zero position before adjusting. Every image needs different values and I always like to start from scratch (zero values).
So, how can I tell PSP not to remember those settings every time?
Another problem, this one since installing Service Pack 1.
The histogram is missing from the histogram adjustment window. Everything is there and works but no histogram. How can you adjust it without histogram? What is up with this? It works in x2.
When I pull up the levels windows both are black. If I reduce the image in the windows, I get a small black square. I have used this feature on various versions for years.
View 1 Replies View RelatedFrom X3 to X4, Corel added a "Block Size" control to the Local Tone Mapping adjustment. Is it the number of pixels over which the contrast adjustment is being applied? It seems that the smaller block sizes reduce the effect's harshness (when it could be harsh, e.g., with faces).
Checked the manual and they forgot to mention it.
I found out that there is a way to show clipping areas in Photoshop when adjusting levels via an adjustment layer. While moving the slider, you hold down the ALT key.
I tried this in PSP X3 and it does not work. Any feature for seeing the clipping preview is available in Paint Shop Pro? It's a nice feature.
this worked until yesterday. I didn't install any software on the pc or change any settings that I can think of. I'm using photoshop cs2. I've rebooted the computer several times and I've quit/restarted photoshop several times.
when I create an adjustment layer, I cannot paint black in the mask area. I can fill with black and paint white. if, after filling black and painting white, I press D (to swap foreground/background colors), I can paint, a paintbrush thing shows up in the history, but it won't change. if I press D again, and paint some more white, it shows up in white. likewise, if I choose black another way (eyedropper, setting rgb to 0,0,0), it behaves the same. likewise, if I don't start out by filling black, and I just try to paint black on the white mask, it behaves the same (doesn't work).
if I create a new layer, I can paint black on it. If I switch to the pencil tool rather than the brush tool, I can pencil black into my adjustment layer masks.
any suggestions?
or what info can I get for you so you have a good place to start?
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies View RelatedI'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
View 14 Replies View RelatedI've had an e-mail from a PSPX6 user friend He says he's been trying to build an image in layers but has discovered that they are out of alignment.
View 8 Replies View RelatedI have a .PSP file with several layers. I would like to save at once each layer as a different .PNG file. Is it possible?
I could set and save just visible layers one by one, but my point is to find some automation.
I haven't really used PSP for doing custom graphics, mostly for working on photos; but before that I was using Adobe Photoshop and I liked (and still do) how it made saving easier than PSP does. Unfortunately Photoshop is horribly expensive so this is a better option.
I can't figure out for the life of me how to save .psd or .eps with the layers? It keeps telling me that due to how I am saving or the file format the alpha layers will be lost and so on.
I have Paint Shop Pro X4 which I am using to try and manipulate images of postage stamps. I scan the stamp using a film/slide scanner and using the cmyk splitter can produce a good images of the watermark and postmark cancellation, which I save separately. On a lot of the older stamps the plate number, from which the stamp is printed, is engraved into the design of the stamp and quite often this number is obliterated by the black cancellation mark. Is there any way using layers, or any other X4 feature, I can lift the cancellation mark from the image to see what is underneath?
View 5 Replies View RelatedI am having trouble adding tools to my layer palette in X4. Previously I use X2 and can perform this action. However it seems to be lacking in X4 and I certainly miss that.
In X2 I could easily add duplicate layer in the layer tab and all I had to do was a single click the tool and I could perform this action, it was convenient keeping in the same area where I could also delete the layer.
I know in X4 I can add the duplicate layers in the top toolbar, however it is not as convenient and seems to be counterintuitive to have it away from the delete layer tool. I also miss the other layer palette customizations.
Is there any other way to add the duplicate layers on the layers palette? Is there a way to perhaps copy the workspace from x2 to x4(probably a silly question).
How do I select multiple layers in Paint Shop Pro XI? I've tried with Shift and Ctrl to no avail.
View 6 Replies View RelatedI'm having an issue with layers not opening properly. I have a file that is a .psd, and when I open it initially, the layers are there. Then, if I save it, it pops up a box saying "because of the limitations of the specified file format (and possibly the save options you have selected), group data will be converted to raster data. Would you like to continue?
If I hit "yes", when I reopen the file, it only has 2 layers. What do I need to do in order to save it with all the layers in tact?
I have just upgraded to W7 and a new computer and now find that when I drag in directly from a folder or open from within X4 the images that are saved as PSD file (originally created in Photo Shop by a friend for me), opens all layers individually rather than one image with all the layers contained to edit. Before the update to W7 I had Vista and the image went in to X4 as expected, contained as one image with editable layers.
View 7 Replies View RelatedWhen I was experimenting before, I was able to see the different layers listed on the RH side of the workspace. Now they are not appearing at all. I have searched but still cannot view the list of the layers I have created.
This in turn means I cannot work on them. And yes, I have got the View>Palettes>Layers box ticked. How to view these layers listed?
I have a photo that I've duplicated into 4 layers. (1 background layer and 3 edit layers).
I'm trying the use the Erase Tool to erase the same section on the 3 edit layers at the same time. This action saves me repeating the same erase on all three layers as separate actions.
how I can erase 3 layers at the sametime?
All I want to do is make a collage of three or four images but I can not open more than one image at a time. How do I get the images into the layers pallet so I can edit from there. I can not find anything in the user guide that will tell me how to do it. I watched and tried the video tutorial intro to layers in PSP x5 but that didn't work for me either. I am using PSP x4
View 5 Replies View Related