I'm trying to make sunlight. I can't go through the tutorials but My screen looks way different.
When I hit the "Light" button (or type light) then I get the text
Point/Spot/Targetpoint/Freespot/freeweB/Distant
Filedia is set to 1. Why can't I get the dialog box?
I'm using acad 2009.
image editing in general, so I'm not sure what how to really say what mean because I don't know the correct terms (If there are any).
The most I can do to clarify what I mean is offer two examples. The first is a picture I found:
[URL]
The sunlight hits her head at the very top right of the image and transitions from white (direct sunlight) to brown (indirect sunlight) to black (almost no sunlight). Also, the light directly touches her hands and legs (white) and then transitions to indirect (pink).
The second example I can offer is on this very forum. On the header, if you look at the larger GIMP dog balloon (I think they're dogs, anyway...) you can see the white oval on top of the purple-ish nose. If you look at the top of the nose, right before it transitions to the black outline, you see an almost reflection-like effect.
Is there a function in GIMP to do this? Or, at least, some sort of work-around?
I tried to use Shadow/Highlight to get the whole pic. brighter so we can see the guy on the left but the whole right side of the image is so bright (because of the sunlight) it looks awful...
View 3 Replies View RelatedI want to place a sunlit object from one photo into another photo where the sky is gray and the light is diffuse.The surfaces which are half sunlit and half shadow in the first photo would appear unnatural in the second where light is diffuse. Does anybody know a technique where these light extremes could be evened out on the object?
View 1 Replies View RelatedIm a CS2 user and have a photo
As you can probably see the problem is with the brillant sunlight pouring through the windows. I have played around with the curves, but it just looks too dark and still white light through those windows. I was going to find a new background for each window cut out and replace and then play with the curves to bring the light down in the rest of the room.
In this photo, i want to remove the sunlight so as to make it more appropriate. Im using Photoshop CS5.
View 5 Replies View RelatedI am needing to create sunlight in some of my photos. How do I do this in Photoshop Elements 12?
View 2 Replies View RelatedI am pretty new to Photoshop and I have come across a few things that I would love to do but I cant figure out how to do them. Also, I have elements so I'm not even sure if I can do them. Anyway one of the things I am trying to learn is how to put lines over an image. For example the very first picture on this site: ...
View 1 Replies View RelatedI was wondering how I could duplicate the texture of this gear/star thing? I want to use the same texture for a square shaped frame. I already tryed messing with the bevel and emboss layer style but I didnt get a the matching result that I desired.
My next question is how do I make my own custom bevel and emboss layer style textures?
can i make halftones from a cdr file to make printing offset plates?
View 3 Replies View RelatedI would like to make a color selection and then make a mask of that color. How on earth do I do that?
View 5 Replies View RelatedHow to make PDF's which were made out of DWG"s less vague?
Same lines can come out looking good or vague. Sometime part of blocks appear vague while the other side appear good.
I am trying to make an thematic map and i want to enter at the value an interval. For example i want to dysplay all constructions that were made between 1980 and 2012 and i dont know what to write at the Value. I've tried to enter (1980,2012) but is not good
View 2 Replies View Relatedi have new project , we make the shop drawing for it . The problem is all object in the file (line, circle, pline, rectangle ….etc. ) this in all files , I want make every thing (Z=0) I used AUTOCAD2009
View 9 Replies View RelatedI am trying to draw a detailed representation of an extension spring. Right now I have two slanted parallel lines and I want to connect them using fillet, but I do not want the arc to make these lines longer, I want the arc to be above the line they intersect with, something like this \__ How do I make the arc be above the line?
The purpose is to not change the length of the object from end to end.
how to make a cycloid in AutoCAD? As in a ramp with theoretically the fastest acceleration.I need this to have a template for a ramp I'm planning on making
Additional:height of 1meter and base of .75meter
I work with a drawing that for some reason don't have a proper fence line in it. I tried to load another .lin file, but still the fence line looks funny. The line I'm after looks and work ok in alla other files but this one!
I tried to copy paste a fence line from another drawing but what's pasted is just half the linetype...
The line should look like this -- / ---- / ---- / ---- but comes in as -- ---- ---- ----
Why do I loose the slashes?
*FENCEONBOUNDARY, Fence on boundary _____ / _____ / _____ / _____
A,.7,["/",STANDARD,S=.05,R=0.0,X=-0.1,Y=-.05],.1
The result should look like ----- / ----- / ----- / -----
Is there a way to make a 2d only project in autocad?
Right now i have to FLATTEN my project every time i want to do any action (like offset for example), because my Z plane values are different.
Is there a way to make a rule that Z plane is 0 always, no matter what happens?
Is there a way to eliminate 3d functions at all, so the project will be 2d?
I thought the idea for the Mtext background mask was to put a transparent mask behind the text to 'grey-out' the object below the text.
When I do that and select a mask color it plots as a black box. So I select a color that normally plots as a screened entity but it still plots out as a solid black mask.
How can I make the mask transparent? Can I not mask out what's below the text? My plotter is set up to plot line weights by line color.
when I tried downloading and installing this INCREMENT app from the Exchange Store. First, I can't get this to run at all. If I go into the CUI settings dialogue, I don't see this plug-in listed anywhere where it should appear. It had occurred to me that maybe the only way this app works is from the plug-in tab and not from the command line, but I'm not sure that makes any sense, either seems it should work either way, if I'm interpreting the documentation correctly. But, I cannot make my ribbon tab appear to check out my probably mistaken theory (see above). Navigating around the CUI dialogue and checking the settings for my tab, I see that it is set to "show" and there is every indication that it should appear, but there seems to be something buggy or suspicious going on with the
Control-0 (clean screen) toggle and/or the Control-9 (command line) toggle as well?I don't see how either of these would have any affect on the visibility of my tab, if they were toggled to the correct setting. I am the only person using this workstation so it's not like there is a profile issue at work here.
How can i make linear in 3D, so i kan se the distance on the Z axis on the drawing
View 2 Replies View RelatedI have been trying to create DXF in AutoCAD 2012, Civil 3D 2012 and Lt 2012 and every time I try to open the DXF after creating it, it comes up with:
Error in APPID table
DXF rear error on line 21308
Invalid or incomplete DXF input - drawing discarded.
I've tried saving it various DXF formats: 2000, 2004, 2007 and 2010, and all show up with the same error.
I use the Key Design Accelerator, i suceded in making the Keyhole in the shaft, but cannot complete the selection for the hub.
I selected the 2 hub's faces, but am stuck in the third and last selection box for the hub, the Second Reference
I'm trying to make a description key set for our surveyors and am running into a problem with one description. For an iron rod they will use the description CH*IR 3/8 W/CAP. I cannot get the point to come in using the right point and label styles.
View 5 Replies View RelatedI have cad drawings but when I select to change a desk in the floor space the whole floor highlights - what can I do to stop that and select only what i want to delete add
View 3 Replies View RelatedI load my .cuix file into Autocad 2013 using VB.Net:
Dim mg As ObjectTry mg = Application.MenuGroups.Item(cuiName)Catch ex As System.Exception mg = Application.MenuGroups.Load(cuiFile)End Try
File loading sucsessfuly, but my menu is invisible.
I tried do this, but got an error..
Dim i As Integer For i = 0 To mg.Menus.count - 1 mg.Menus.Item(i).Visible = True Next
How to make menu visible?
I import a survey data (X,Y,Z) in civil3D and make an horizontal alignment near them. I want reference theses survey points to my new alignment by a .txt report (#pts CH. OS elevation). Is it possible?
View 3 Replies View RelatedI need to know the best way to go about making the rosette (the frills around the center of the medallion). Should I fold a long strip of sheet metal repeatedly? Should I make a single frill and use the circular pattern tool to duplicate it?
View 5 Replies View Relatedwhen I wanna make an array, i've to make all my choices on the command-line. How can I make appear the array-window, which I used to have in previous autocad versions? is there any variable I have to change? I'm using Autocad 2012 now.
View 4 Replies View RelatedI'm currently working on a drawing that has three different viewports with the scales of 1-250, 1-500 & 1-1000. I would like the text I've created in model space, to display at the same size (2.2mm) in all of these different viewports.
I'm using metric, and 1 unit in AutoCAD = 1m. I know that most people use 1 unit in AutoCAD = 1mm, but in my profession (working on large architectural site surveys) 1 unit in AutoCAD = 1m is the norm.
So the viewports are set at 4:1 for 1-250, 2:1 for 1-500 & 1:1 for 1-1000. I've set the text to be annotative, and to have the same scales. The annotation scale is currently set at 2:1 in model space.
Firstly, I don't really understand why and when I'd need to change the annotation scale in model space? I've adjusted it in the past to make sure that lintypes display the same in both model space and within viewports. Is it the same thing?
Secondly, by doing the above, all that I've achieved is that currently in model space the text is 1.1m high (which is what I want, and how I'd originally created it). In the viewports it is now coming out at 8.8mm for 1-250 (4 x too big), 4.4mm for 1-500 (2 x too big), and 2.2mm for 1-1000 (the correct size).
When I activate the viewports, it tells me that "annotation scale is not equal to viewport scale" in all but the 1-1000 viewport.
How can I make the text 2.2mm in all of the viewports?
Is it possible to make a solid (that i can slice in autocad) from a *.skp ( 3d) file from sketch up.
View 3 Replies View Related