I use the Key Design Accelerator, i suceded in making the Keyhole in the shaft, but cannot complete the selection for the hub.
I selected the 2 hub's faces, but am stuck in the third and last selection box for the hub, the Second Reference
I need to know the best way to go about making the rosette (the frills around the center of the medallion). Should I fold a long strip of sheet metal repeatedly? Should I make a single frill and use the circular pattern tool to duplicate it?
View 5 Replies View RelatedI have in my assembly many parts. Is there a quick way to make sure, that no parts are "in" one another? That they are only touching each other?
View 2 Replies View RelatedI am drawing an adjustable drill stop. I have basically chamfered a cylinder to create a point. I know what the sweep profile looks like, I just cannot seem to angle the plane to be tangent with the chamfer.
IV2011 Professional 32-Bit
i want to import dxf into my sketch, and than Extrude shape to make a box. I cannot do this because Inventor says that he can find closed regions. Dxf is made in adobe illustrator.
View 4 Replies View RelatedOur company works with some non-standard threads. I am making some 3-D models of our product and need to make a threaded bar.
View 8 Replies View RelatedWhat is the best way to make art forms with inventor?
View 9 Replies View RelatedI have an assembly (ex: test1.iam) that have many parts.
There are 2 of them, that I what to make only one assembly, and I would like them to stay in same the position as in test1.iam.
How do I do that?
I'm using Inventor 2013 and VB 2010 Express... I can find a part or sub from browser and open it seperately by below
Dim invDocs As AssemblyDocument
invDocs = Form1.inv_App.ActiveDocument
Dim invDocument As Document
Dim Sayac As Integer
Dim oRefDocs As DocumentsEnumerator
oRefDocs = invDocs.AllReferencedDocuments
Dim invDocument2 As Documents
invDocument2 = Form1.inv_App.Documents
For Each invDocument In oRefDocs
If Form1.BaseFilename(invDocument.FullDocumentName).ToUpper = TextAranan.Text Then invDocument2.Open(invDocument.FullDocumentName, True)
Sayac += 1
Next
But I need to make the part selected on the browser? I want to focus (highlight) on the part and reposition the browser tree?
Is there a way so that when I make a view in a drawing,
it shows up by default with all it's real lines, instead of having to select the options all the time...
I need to make a model of saddle surface. The surface is given by equation z = y^2 - x^2, and I must have some thickness - It will be printed on 3D printer.
I have Inventor 2014 and I dont see possibility of making the surface directly in Inventor. Is there any trick for that?
I'm afraid I cannot use solution as stated here Equation-driven surface , because saddle surface looks like this hyperbolic paraboloid .
I tried this solution: I made 3D surface in Matlab, exported it in .stl and opened in Inventor - but this only makes the surface with no thickness. Functions extrude, loft require 2D sketch.
I try to make a 15.5 mm fillet bead according to the picture. No success
View 6 Replies View RelatedI can't make a spring moving according to other parts' behaviour. I use Inventor 12. by the way I sent two photos (scanned by Microsoft Security Essentials-no problem), the spring in the photos was made by design accelerators-as compression spring. I want from spring to move with the other parts but it doesn't. For instance when I pull the blue part down, blue part, and the spring go the into of each other.
View 3 Replies View RelatedI have an assembly that i want to insert in another assembly. When i do insert it i try to make it "Adaptive" but the option is graded out/not available. How can i make it Adaptive?
View 2 Replies View RelatedHow to make a Gear in autodesk?
View 4 Replies View Relatedwhat kind of work flow I can use to make an assembly adaptive as possible..I need to make a machine fixture that requires cut outs for three parts. The fixture is made from a 8" x 5" x 0.19" thk piece of UHMW. I've made the "blank" and it features the work planes I need to place the three parts that the cut outs are derived from.
At first I just started the assembly and placed the parts where they should be and then used sketched outlines to define the cuts. However, since the parts are there they get "cut" as well.
I was wondering if I could make adaptive sketches linked to these parts and then import THEM into the correct plane. I could then use them to define the cuts.
I have cut out a spiral from top on a cylinder, now I want to make a nice finish. And cutting with a conical spring profile is the way to do it.
View 5 Replies View RelatedI have an assembly with several analogical parts and they have sketches with project geometry inside this assembly ("Adaptive" function works good, look pic "Works").
Unfotrunately, one part of parts doesnt work perfectly ("Adaptive" function is not active, look pic "Doesnt work"),
How do i make the 3mm fillet go in the other direction.When i apply the fillets to the top of the pipes it goes inwards but i want the fillet to go outwards.(like a weld - i don`t want to weld though just use a fillet).
View 1 Replies View RelatedAttached is a test drawing
1. Why does my part not show up behind a surface?
2. What is the minimum dimension to make my part appear?
On the drawing I was working on, the part completly behind a surface was showing up until I rotated the view, then it dissapeared, this behaviour is not present in the test idw, the part doesnt appear at all behind the surface.
how to make the 2D barcode Data Matrix barcode in Photoshop CS4?
View 9 Replies View RelatedI'm about 1 day into IV and thus far I'm loving it, so happy I chose it over Pro/E.
Right now I'm playing around with its capabilities. How to go about making a 3D mobius strip in IV?
I was giving an assembly with a lot of piping in it, but the piping wasn't done using the Tube & Pipe. I need to make a drawing of the piping with a BOM. I made an ISO view and turn off the visibility of the parts I didn't need.
My question is if there is way for the BOM to only show the visible parts in my drawings. I know in iAssemblies I can exclude the parts I don't need, but that would take awhile considering there are over a hundred parts in my assembly. I really don't want to redo the piping mainly because of my inexperience with Tube & Pipe.
I cannot get a 'centerline' (symbols panel/centerline) to create. I can use all the others (centerline bisector, centermark and centered pattern) without fail. This first one (with the single line) does not EVER give me the option to 'create' when I am done clicking my points, its always greyed out and I dont know why.
how to make a centerline...select that option, click here, click there, when done right click and 'create'. Doesnt work.
Inventor 2014 PDS
how can I make a folder in the browser in the part modeling and put something like extrude,revolve & ... in the folder? (not in the assembly)
View 1 Replies View Relatedhow to make spiral array? I am to model ballscrew and would like to put ball in. To do so I would need something like spiral array.
View 8 Replies View RelatedI want to make symmetric surface i.e. golf ball with dimples. I found that I can do them by using revolve cut but how can I set them symmetrically on whole spherical surface.
View 5 Replies View RelatedI'm trying to make a solid part from the attached file. I tried sculpting the part but only the sides of the bracket become solids.
View 3 Replies View RelatedHow to make an Aeroplane propeller.
View 8 Replies View RelatedI have to make serration (circular groove) on the face of the flange. The problem each groove dia will be different or incremental to the previous groove. I don't want to draw sketch for each one, that will be too much work. Of course, pattern won't work either.
View 8 Replies View RelatedI have patterned a part in an assembly and now wish to modify one of the patterned components without it changing the others. When I edit one of the patterns it changes the others similarly. Is there a way to make changes to just one pattern without affecting the others? The modifications are to a frame generated design.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)