AutoCAD Inventor :: Make Sure That No Parts Are In One Another?
Jul 27, 2012I have in my assembly many parts. Is there a quick way to make sure, that no parts are "in" one another? That they are only touching each other?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Make Some Parts Shaded In Drawing
Mar 20, 2013I am now making drawings of complexed structures and would like to draw attention to some elements that are important for particular drawing.
What I would like best would be to be able to schade selected parts. But did not find a way to do that.
AutoCAD Inventor :: How To Make All Parts And Features Visible
Sep 26, 2012I have a large assembly that I have been working with for about a month . I recently went in and changed some information and it seems that my work plane is way out of whack! How to get it back down to size. this makes it real difficult to use my space navigator because the center of gravity is off bigtime too. I also would like to know how to make all parts and features visible, is there a button somewhere?
View 4 Replies View RelatedAutoCAD Inventor :: Make Parts Disappear From Assemblies - 2013
Nov 27, 2012How is it possible to have a part in an assembly and then remove it when it is not required?
I have a Skeletal assembly of a cabinet with hinges on the left hand side when facing the front. When a customer requires the hinges to be on the right hand side, I need to make the lock keep disappear from the Right hand side panel sub-assembly and make it appear in the Left hand panel sub-assembly.
At the moment, I have the lock keep, the BOM structure in the file is Normal, this is overidden in the assembly to being Reference for the first instance, the lock keep is fully constrained in both sub assemblies and both are in an array of only 1. I increase the value of the array from 1 to 2 and by a distance of zero(0), the newly added part would have a BOM structure of Normal, consequently it would then appear on the BOM. This method was something I last used when using IV2009, it was a method I used to control both visibility of parts in assembly drawings and on BOMs.
I'm now using 2013 and arraying a part with a overidden BOM structure of Reference makes the new part a reference part aswell even though the file itself is BOM structure of Normal.
AutoCAD Inventor :: Make Referenced Components From Parts And Assemblies?
Oct 4, 2012How do I make referenced components from parts and assemblies? (I searched the web and it said that that you can change it in the iProperties by selecting the Reference tick box under the occurance tab - but no such thing exists in Inventor 2011!
View 2 Replies View RelatedAutoCAD Inventor :: Wrap Parts List And Make It Independent
Aug 21, 2013After I wrap a parts list. Can I make them independent?
I would like to move each of them around.
AutoCAD Inventor :: Make Selection Of Parts Directly Invisible Instead Of First Visible
Dec 19, 2013Is there a way to make parts invisible directly independent to the selection you made (selection can contain visible, invisible or both parts)?
Most of the time, i make a selection in the model browser and want to put a list of parts directly invisible. Sometimes i also select already invisble parts.
Now what inventor wants to do is make them all first visible before i can make them invisible. As far as i know, there is no other option to do this.
Is there maybe a combination with holding shift or something to directly toggle them invisible?
AutoCAD Inventor :: How To Make All Imported Parts To Be Opened As Purchased By Default
Dec 9, 2011How to make all imported parts to be opened as Purchased by default?
View 9 Replies View RelatedAutoCAD Inventor :: Make Derived Part Into IPart Without Creating More Parts?
Feb 8, 2013I have a part that was derived from an assembly. However now I need to make this part have different center dimensions. Is there a way to make a derived part into an iPart without creating more parts? see attachment.
I am using Inventor 2012. BTW the part is more detailed than I am showing in the attachment.
AutoCAD Inventor :: How To Make Few Assemblies In Separable For Parts List In Drawing
Mar 13, 2013I'm trying to make a few assemblies inseparable for a parts list in a Drawing, but I can't seem to make it work.
I know I have to do this in the Bill of Materials menu, but for some reason the part I want to make inseparable is greyed out whiles the one that is just one part isn't.
My only option right now is to make it a weldment which works but not ideal, because now the material isn't correct.
I'm trying this on the 099.03.00.097 assembly in the picture.
AutoCAD Inventor :: How To Make Macro That Adds Vendor Column To End Of A Parts List
Sep 10, 2008I am trying to make a macro that adds the vendor column to the end of a parts list, sort by it first, then by part number, renumber the parts list, then save the overrides to the BOM. Everything works great except for saving the overrides to the BOM. The item number sort order gets jumbled back up. I am using Inventor 2008 Pro SP2. Below is the
Public Sub SortPartsList()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oPartsList As PartsList
Set oPartsList = oDoc.ActiveSheet.PartsLists.Item(1)
Dim oPropsets As PropertySets
[Code]...
AutoCAD Inventor :: Using Make Components Feature To Convert Solid Bodies Into Parts
May 8, 2013I'm currently using the "Make components" feature to convert solid bodies into parts. This works great, but we use this method to construct angular roof structures, and after the parts have been made the parts have angular relationships to the .ipt files UCS co-ordinates. It would be very useful if I could align the longest edge of the part (Which is a timber truss) with the x axis in the model space and "lay" the plank flat on the X-Y plane.
View 4 Replies View RelatedAutoCAD Inventor :: Make Content Center Parts Placed Into Model Reside In Local Path
Dec 5, 2011Completed a project. Wanted to show the customer the end result and go over changes on my laptop. Copied the directory to my laptop. None of the Nuts & bolts will show up on the laptop version. Got a new desktop computer. Same problem. My completed version doesn't show the content center items, Hence drawings & assemblies are always un-resolved. How can I get the Content center files to show up without deleting and reinserting the items.
Also how can I make the content center parts I place into the model reside in the local path.
AutoCAD Inventor :: Can't Make Individual Parts Adaptive To Multiple Assemblies Without Saving Each Part
May 4, 2013 We use a similar sub-assembly in almost every assembly we design. So what I would like to do is make a template from this sub-assembly that I can make adaptive, constrain to the proper parts and have it resize to the main assembly. I've been trying to do this for a few weeks now with little success.
I have seen tutorials make adaptive part templates but never adaptive assembly templates. Is this even possible?
I know you can't make individual parts adaptive to multiple assemblies without saving each part as a different file and I think that's where my problems are coming from. Even though I save the template as a different file is it still referencing the original adaptive part in my library folder? If so, is there a way I can make it not do that? I may be way off base there too I don’t know.
AutoCAD Inventor :: Make Sub Assembly From Parts From Main Larger Assembly?
Oct 31, 2011My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
AutoCAD Inventor :: ILogic Design Copy Does Not Make Copy Of Content Center Parts
Jul 5, 2012I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
AutoCAD Inventor :: Replacing Parts With Custom Parts Created From Content Center
Sep 27, 2012I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedAutoCAD Inventor :: Showing Two Instances Of Parts List And Adding Custom Parts
Mar 30, 2012On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
AutoCAD Inventor :: Creating Parts With Work Planes Defined By Other Parts
May 2, 2013I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
AutoCAD Inventor :: Parts List Update When Modifying Model Parts In Idw
Aug 21, 2012My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Virtual Parts Weight Total BOM And Parts List
Aug 7, 2013I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
AutoCAD Inventor :: Display Density Of Materials Assigned To Various Parts In Parts List On Drawing?
Dec 9, 2013Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
AutoCAD Inventor :: Assemblies Showing In Parts Only Parts List
Jul 10, 2012I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
AutoCAD Inventor :: IDW View / Parts List Changes From Structured To Parts Only
May 3, 2013IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
AutoCAD Inventor :: Parts Not Selecting For Parts List
Sep 22, 2011I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
AutoCAD Inventor :: How To Reuse Parts Rather Than Create New Parts
Jul 25, 2012I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedAutoCad :: Make Part Command For Custom Parts?
Oct 31, 2011I have made a large amount of custom parts in a systems furniture drawing I am doing. I made the mistake of putting them all on the same layer and am now realizing i need them to be on separate layers. I tried to just make new layers and then assign the new layers to my custom parts. It acts like it does it but then the parts behave as if they were still on the common layer that i originally created them on. Is there a way to get the custom parts to only be linked to the new layer and not act like they are still on the original layer? My other thought was if i made a new layer, then drew my custom symbol again using that layer... could I then somehow tell my custom part to now use this new symbol that is on the new layer instead of the current symbol that is on the bad layer? I am trying to avoid having to completely start over creating all my parts again because there are at least 30 and I had already put in all of the options, atriubtes, part numbers, pricing, etc... and it would be very time consuming to start that over.
View 6 Replies View RelatedVideoStudio :: Not Enough Space On DVD - How To Make 2 Parts
Jul 7, 2011Small problem with Vdeo Studio x4.
After creating my project and adding clips and effects and all , when trying to create the DVD or the DVD folders, there is not enough space on a 4.7 GB DVD... It will create the ISO file or the folders [I think] but how do I split it in 2 parts when I want to burn on DVD ...I mean, is it even possible? I need ~ 2 DVDs cause the output "DVD files" will take 7.9 GB in space ...
Photoshop :: How Do You Make Parts Of A Graphic Transparent?
Dec 15, 2005I have a graphic which I want to overlay onto a video. I want to erase small bits of the graphic but not with any colour - but make it transparent so you can still see what's behind it when I overlay it.
View 1 Replies View RelatedPhotoshop Elements :: Make Parts Of Imported Image Transparent?
Jun 1, 2013I recently started using Adobe Photoshop Elements 11, and it looks really great, but I cannot figure out how to make certain parts of an image transparent. I pasted an image in, and there is white around the sides, and I wanted to get rid of them, by making them transparent. How I would be able to do that
View 1 Replies View RelatedPaint.NET :: How To Make Gray Button - Semi-transparent Parts Became Solid
Jan 15, 2012I'm making some buttons for a game I'm making. The game has several themes you can switch to. I tried to make a gray button, and then add the theme gradient/image on top, but the semi-transparent parts of the button became solid.
View 2 Replies View Related
