AutoCad :: Make Part Command For Custom Parts?
Oct 31, 2011
I have made a large amount of custom parts in a systems furniture drawing I am doing. I made the mistake of putting them all on the same layer and am now realizing i need them to be on separate layers. I tried to just make new layers and then assign the new layers to my custom parts. It acts like it does it but then the parts behave as if they were still on the common layer that i originally created them on. Is there a way to get the custom parts to only be linked to the new layer and not act like they are still on the original layer? My other thought was if i made a new layer, then drew my custom symbol again using that layer... could I then somehow tell my custom part to now use this new symbol that is on the new layer instead of the current symbol that is on the bad layer? I am trying to avoid having to completely start over creating all my parts again because there are at least 30 and I had already put in all of the options, atriubtes, part numbers, pricing, etc... and it would be very time consuming to start that over.
View 6 Replies
ADVERTISEMENT
Mar 28, 2012
I go to the Parts List, Insert a Custom Part, click Apply, Click Ok and nothing shows up. I go back in to Edit the Parts List and the Custom Part is not there at all.
View 4 Replies
View Related
Feb 8, 2013
I have a part that was derived from an assembly. However now I need to make this part have different center dimensions. Is there a way to make a derived part into an iPart without creating more parts? see attachment.
I am using Inventor 2012. BTW the part is more detailed than I am showing in the attachment.
View 2 Replies
View Related
Jan 11, 2012
A workflow that works great for me is to create parts (Make Part command) from a multibody solid. The dialog window presents one with an option to choose other Templates (I have a few), BUT I have to choose the template I want to use EACH time I create a part. That is, Inventor doesn't automatically remember the last Template I chose, it defaults to the Standard.ipt or Standard.iam.
Is it possible to set it so that Inventor remembers what Template I chose the last time so that I don't have to choose it every time I Make Part?
View 9 Replies
View Related
May 4, 2013
We use a similar sub-assembly in almost every assembly we design. So what I would like to do is make a template from this sub-assembly that I can make adaptive, constrain to the proper parts and have it resize to the main assembly. I've been trying to do this for a few weeks now with little success.
I have seen tutorials make adaptive part templates but never adaptive assembly templates. Is this even possible?
I know you can't make individual parts adaptive to multiple assemblies without saving each part as a different file and I think that's where my problems are coming from. Even though I save the template as a different file is it still referencing the original adaptive part in my library folder? If so, is there a way I can make it not do that? I may be way off base there too I don’t know.
View 7 Replies
View Related
Oct 31, 2013
I have a part number that i want to defined in custom properties.
Then would it be possible to call it out in Ilogic? that way in any drawing doesn't matter where the part number will always be the same for that part when i balloon and the same in the BOM.
View 4 Replies
View Related
Dec 6, 2011
I am trying to make a custom flange to my sheet metal part. The flange tool only gives parallel flanges, but I would like my flange to be longer on one end than the other. Basically cut at the red lines.
I am using Inventor 2009 Suite.
ACAD 2010
ACADE 2008
AIS 2009
View 1 Replies
View Related
Nov 17, 2011
I would like the size of bearing to be included in addition to existing data to the File name, Part number and Browser name like for example the DIN 625 T1 does. I have copied the DIN 625 bearings to the custom library. I have added required info to File Name building and to the Part Number building in the custom library and now my Filename and Part Number are as I like to.
But I cannot find how to force the Browser name to be equal to Part number or File Name? [URL]
View 2 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
Feb 21, 2013
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
Nov 27, 2013
When I drag a previous custom command into an existing custom tool bar and edit the custom command (then rename the command in the Name and Command Name) it also changes the previous custom command that I originally drug into the toolbar. What am I doing wrong?
View 2 Replies
View Related
May 16, 2013
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
View 1 Replies
View Related
Sep 13, 2012
I use inventor 2012. In some projects the cc parts cannot be saved as a custom part (error message: Unable to create component), but in some project it works. I checked all projects settings are same.
View 2 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Mar 11, 2013
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 9 Replies
View Related
Apr 1, 2013
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
View 9 Replies
View Related
Feb 20, 2012
When inserting parts from CC, by default As Standard is chosen, but I always need As Custom, so I can choose where to place the files. Is it possible to make As Custom default option?
View 2 Replies
View Related
May 1, 2013
I am looking for a way to miter two pieces of rectangular hollow section.
I have placed the parts from the content center as custom parts, now I am looking for a way to perform a miter on the them where they intersect.
I am aware I can perform the miter if the sections had been created through frame generator but I was wondering if miter could be used outside the fg environment.
View 7 Replies
View Related
Nov 8, 2013
I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...
During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?
View 4 Replies
View Related
Aug 8, 2013
I have a lot of custom libraries for purchased items for my projects. When I bring them into my assemblies I cannot turn on or off surface planes or make any changes.
I get the message that the file is not checked out to me. How can I make it so they are always checked out to me. The libraries are mine on my system.
View 9 Replies
View Related
Jan 16, 2012
I am trying to add a custom iProperty from my assembly to the drawing parts list. According to the help wiki, I'm supposed to click Column Chooser > New Property > Custom Properties List (click here to see the relevant wiki page--also see the attached screenshot called Custom Property Help.png).
When I click on new property, there is nothing about Custom Properties List.
View 2 Replies
View Related
Sep 7, 2012
I have Edited the Conc pipe and added a new profile with three new model parameters to be used as list types in the part type. But it will not hold or change the values when selected.
My workflow (obtained from websites : [URL ]was to:
Check the custom parts flag then create the Geometry / constraints, dimensions and variables.
Added the following Variables (PWks, PDpth, PBed) to the AeccPartParamCfg file in the AeccDfParameter & pipe part type as optional parameters.
Edit the parts XML and changed the context & index for each variable.
Restart Civil3d 2013 and run partbuilder. Regen Catalog > Test Catalog.
The part is validated correctly but when I insert it into a new partslist the values I receive for the new contexts will not come in correct as to what was selected. Also after creating a pipe I can not change any of the new values (it does not hold after apply) & the bottom of the pipe in model seems to be at an incorrect level based from the actual pipe data.
The part worked as expected in partbuilder with different sizes before the XML mods.
If I re-open the pipe in Part builder I see duplicate references for the newly added contexts and their index numbers.
Should I just start again or have I done something wrong in the creation process?
Civil3D 2013 / 2014
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
View 1 Replies
View Related
Apr 4, 2013
how to copy parts from the existing CC to newly created custom folders within the CC. We are now just starting to look into which parts we want to be in our custom folders moving forward.
Once we copy them over, the plan is to change the descriptions and possibly some dimension values. Because we are in the early stages of revamping our companies part number scheme the thought was to keep the out of the box P/N's currently showing in the family table of these parts. Some of these parts have already been used as "Standard" (not custom) from out of the box in the CC and these said parts have already been checked into the vault. If we are not changing the part numbers in the copied parts family table, is this going to create errors when checking these copied parts into the vault? Part of me is saying I am going to get the "This part already exists in the Vault" error message being they are standard parts But, the other part of me says technically they are different so maybe this wont be an issue. I am looking for confirmation of this.
I also would like to know if it is possible, when you have two separate custom folders in the CC can you copy the same component into both folders changing only slight things.
Inventor Suite 2012
Windows 7 Professional
Intel (R) Xeon (R) CPU 3.47 GHz
12.0 GB Memory, 64 bit OS
View 3 Replies
View Related
Feb 3, 2012
I have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)
What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).
So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.
Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.
View 9 Replies
View Related
Nov 21, 2013
I'm having a bit of trouble creating a new parts list style. I really want to have two styles to choose from in all three of my .idw templates. I understand how to create them but I can't save them to the library.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 4 Replies
View Related
Sep 18, 2013
I have an assembly that I just want to costrain 2 faces and then slide it into place to see how it will fit....But it will not pass through the other parts.[URL]
View 2 Replies
View Related
Mar 26, 2013
When inserting a Content Center part into an assembly as a custom part instead of as a standard one, then opening and modifying the part, the thumbnail for the new file is not updating to show the modifications. In this particular instance: a pipe blind flange with an off-center hole drilled through the face. The thumbnail still shows as the original (and fairly pixelated) CC blind flange. forcing the thumbnail to update?
View 4 Replies
View Related
Apr 4, 2012
attached is a basic IV2012 part made as 1.....can i separate the 2 features and make 2 independant parts from the single part?
If yes can i then use these separate parts and place in assemblies?
View 3 Replies
View Related
Feb 14, 2013
I have a bunch of parts that are almost identical except for a few minor changes each time. Most have already been created in Inventor. My problem is that I want to rotate the part so that a face that was once along the XZ plane will now be in the XY plane. Is there anyway to rotate it like this? I would like to do this so that when I bring it into Mastercam, I don't have to rotate it each time.
Crev64
Autodesk Inventor 2009
View 2 Replies
View Related