AutoCAD Inventor :: Make Selection Of Parts Directly Invisible Instead Of First Visible
Dec 19, 2013
Is there a way to make parts invisible directly independent to the selection you made (selection can contain visible, invisible or both parts)?
Most of the time, i make a selection in the model browser and want to put a list of parts directly invisible. Sometimes i also select already invisble parts.
Now what inventor wants to do is make them all first visible before i can make them invisible. As far as i know, there is no other option to do this.
Is there maybe a combination with holding shift or something to directly toggle them invisible?
View 1 Replies
ADVERTISEMENT
Mar 9, 2012
in a drawing I made some lines invisible (right-click on the line, and uncheck visibility). how can I make these lines visible again? for obvious reasons I can not right-click on them (they are not visible), and I don't find them in the browser tree.
View 2 Replies
View Related
Sep 26, 2012
I have a large assembly that I have been working with for about a month . I recently went in and changed some information and it seems that my work plane is way out of whack! How to get it back down to size. this makes it real difficult to use my space navigator because the center of gravity is off bigtime too. I also would like to know how to make all parts and features visible, is there a button somewhere?
View 4 Replies
View Related
Nov 17, 2009
any way to view invisible block attribute? I created a block and the attributes really don't need to be seen in autocad just there for dataextraction and keeping it all in one location i want to go back through and make sure i have information filled in in all the right invisible attributes without having to open each block and check the attributes, but i don't want them permanently visible (i know i can freeze them or put them on a non plot layer but it clutters up the space when there is 20+ attributes to a block)
View 9 Replies
View Related
May 11, 2012
I'm working on a small Assy (25 parts). When I open one of the parts from this Assy and work on it then go back to the Assy many parts are not visible. The update button is usually off so I can't use it.
This started only about 2-3 weeks ago - in every assy. I changed the nvidia driver but didn't work.
Inventor pro 2012
Win 7 Pro. sp1 64 bit
Intel Core I7-2600 CPU
Ram - 8GB
Quadro 2000 D
Nvidia 275.89 (tested nvidia 296.70 with no luck)
View 4 Replies
View Related
May 13, 2013
in my assembly part visibility is controlled by a Ilogic rule which selects an Iassembly. This assembly is a parametric model controlled by excel. The visible parts have to be exported to dxf.
Everything is working (iterating through parts, export sheet metal to dxf), but how can I check whether a part is visible within the assembly?
View 1 Replies
View Related
Feb 21, 2013
I'm building a platform and have sheet metal on top of a tube frame. When I'm zoomed up closely I only see the sheet metal surface. But when I zoom out further some of the tubes start becoming visible through the sheet metal. This happens in just about every assembly. Parts behind other parts start becoming visible when zooming out far enough.
Is there a way to stop this from happening?
View 2 Replies
View Related
Nov 18, 2013
I have some parts in a subassembly that I want to make invisible. When I input my iLogic code(that I used hundreds of times before) the part is made invisible in the subassembly only if I open the subassembly. When I go back to the parent assembly it still shows the part visible. Here is a sample of my
If ACCESS_DOOR = "NO DOOR" ThenComponent.InventorComponent("INSPECTION DOOR:1").BOMStructure=BOMStructureEnum.kReferenceBOMStructureComponent.Visible("INSPECTION DOOR:1") = FalseElse If ACCESS_DOOR = "12X12X6"
[Code].....
The components I'm referring to are the components "Component.Visible("ACCESS DOOR STUD:2") = True" for the stud,clamp, and handle.
View 1 Replies
View Related
Nov 8, 2011
I'm assembling parts and one of the parts is in my Inventor Library. When I try to make a plane visible it won't let me. I can constrain to the plane , I just can't make it visible.
Inventor 2011
Autodesk Inventor 2011
AutoCAD Mechanical 2011
View 4 Replies
View Related
Aug 3, 2010
I'm having issues involving hidden lines that should not be hidden lines in the idw environment.
I am using Inventor 2010 suite, 64-bit. I have largish assembly modeled with several sub-assemblies and a few reference assemblies. Some of the reference models are shrinkwraps from other large assemblies (surface type shrinkwrap, link broken), and other reference models are acutal assemblies that I am unable to shrinkwrap because I need the positional reps that they provide.
When I place my parent assembly, with all the normal and reference models included, on an idw, large portions of the reference models do not show up. If I change my line style to show hidden lines, the missing parts show up. At first, I thought that it may be because the reference parts in question were not originally in the view due to the reference data margin, so I started a new sheet and set the margin large enough to show the entire machine, as well as the state of Michigan, before I set the base view, but I still don't get those parts unless I enable hidden lines.
Even at that, Inventor is not behaving consistently. Some of the parts that won't show unless hidden lines enabled are fabricated parts that I or a co-worker modeled, some of the parts were imported from SAT, STEP and IGES files, and some of them are shrinkwrap parts. On top of that, some of the parts will show up normal (without hidden lines shown) if I change the part's BOM structure from reference to normal, while others still will not show unless hidden lines are enabled, regardless of the BOM structure. Keep in mind, none of these parts are hidden behind anything in the model, even with everything visible in my design view rep, so what's causing Inventor to think these parts are hidden.
Computer Specs:
Dell Precision M6500 mobile workstation (purchased in April 2010)
Windows 7, 64 bit OS
Intel i7 processor
8 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP3
Computer Specs:
Dell Precision M6500 mobile workstation
Windows 7 SP1, 64 bit OS
Intel i7 processor
12 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP4
View 6 Replies
View Related
Mar 15, 2012
how come the attributes of inviseble visibility states are visible after the explosion with the command BURST
View 5 Replies
View Related
Nov 2, 2011
Attached is a test drawing
1. Why does my part not show up behind a surface?
2. What is the minimum dimension to make my part appear?
On the drawing I was working on, the part completly behind a surface was showing up until I rotated the view, then it dissapeared, this behaviour is not present in the test idw, the part doesnt appear at all behind the surface.
View 1 Replies
View Related
Oct 30, 2005
When using the express tool Burst, Invisible attributes are now visible. How does one modify the routine so that the invisible attributes are deleted.
View 3 Replies
View Related
Aug 1, 2012
Is there a way to display the mass of a selection of parts through iProperties ? Similarly to the way to show the mass of a single part but but selecting multiple parts and getting their collective mass ?
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Jun 10, 2013
For some time now i experience a really strange problem with my layer masks: the parts of a layer I hide with a black layer mask are still slightly visible in my picture - like these pixels still have an opacity of about 5%. The colour in the mask is definitly black and not dark grey (this was my first guess what could be wrong). I have no idea when this problem started, but I believe it was not there when I started to use CS6 (which I still do and on which the problem appears).
View 1 Replies
View Related
Apr 19, 2013
I am trying to create a rule that if a certain property is set to Gx then certain text on a template becomes invisble.
I have created a Text style and thought the following code would suffice....
Format:HTML Format Version:1.0 StartHTML:
165 EndHTML:
1942 StartFragment:
314 EndFragment:
1910 StartSelection: 314
EndSelection: 314
SyntaxEditor Code Snippet
Ifz_ValueS="Gx"Then
ThisDoc.Document.StylesManager.Text("Standard").Visible=FalseEndIf
But alas it does not work. I guess I could create the text using layers and make the layers invisible but is it possible.
View 1 Replies
View Related
Oct 4, 2012
I've generated my steel frame model using a skeletal model technique. So my part file consists of only sketch lines representing where I want my steel to be placed. I've created an assembly and used that in my inventor.dwg file.
The problem is that I need to dimension to the sketch file and not to the model shapes because the sketch lines define the center of gravity. These lines aren't visible even though I've right-clicked on the content and selected "Get Model Sketches". How I can get my skeletal model through to the DWG environment?
View 5 Replies
View Related
Oct 16, 2013
My Publish Services panel is enabled and visible, but it is empty. All Publish Services are invisible. However, it seems they are still there, because from a photo I can "Goto Collection" and select the Published Collection that it's in. In grid view, this takes me to the screen where it shows me Published Photos, Modified Photos, etc. But I cannot create new Published Collections.
I am using Lightroom 5.2 64-bit on Windows 7. This problem only arose recently without any known trigger. I've had this problem before but it went away on it's own after I published from a different catalog.
View 17 Replies
View Related
Jul 27, 2012
I have in my assembly many parts. Is there a quick way to make sure, that no parts are "in" one another? That they are only touching each other?
View 2 Replies
View Related
Mar 20, 2013
I am now making drawings of complexed structures and would like to draw attention to some elements that are important for particular drawing.
What I would like best would be to be able to schade selected parts. But did not find a way to do that.
View 5 Replies
View Related
Nov 27, 2012
How is it possible to have a part in an assembly and then remove it when it is not required?
I have a Skeletal assembly of a cabinet with hinges on the left hand side when facing the front. When a customer requires the hinges to be on the right hand side, I need to make the lock keep disappear from the Right hand side panel sub-assembly and make it appear in the Left hand panel sub-assembly.
At the moment, I have the lock keep, the BOM structure in the file is Normal, this is overidden in the assembly to being Reference for the first instance, the lock keep is fully constrained in both sub assemblies and both are in an array of only 1. I increase the value of the array from 1 to 2 and by a distance of zero(0), the newly added part would have a BOM structure of Normal, consequently it would then appear on the BOM. This method was something I last used when using IV2009, it was a method I used to control both visibility of parts in assembly drawings and on BOMs.
I'm now using 2013 and arraying a part with a overidden BOM structure of Reference makes the new part a reference part aswell even though the file itself is BOM structure of Normal.
View 5 Replies
View Related
Oct 4, 2012
How do I make referenced components from parts and assemblies? (I searched the web and it said that that you can change it in the iProperties by selecting the Reference tick box under the occurance tab - but no such thing exists in Inventor 2011!
View 2 Replies
View Related
Aug 21, 2013
After I wrap a parts list. Can I make them independent?
I would like to move each of them around.
View 1 Replies
View Related
Dec 9, 2011
How to make all imported parts to be opened as Purchased by default?
View 9 Replies
View Related
Feb 8, 2013
I have a part that was derived from an assembly. However now I need to make this part have different center dimensions. Is there a way to make a derived part into an iPart without creating more parts? see attachment.
I am using Inventor 2012. BTW the part is more detailed than I am showing in the attachment.
View 2 Replies
View Related
Mar 13, 2013
I'm trying to make a few assemblies inseparable for a parts list in a Drawing, but I can't seem to make it work.
I know I have to do this in the Bill of Materials menu, but for some reason the part I want to make inseparable is greyed out whiles the one that is just one part isn't.
My only option right now is to make it a weldment which works but not ideal, because now the material isn't correct.
I'm trying this on the 099.03.00.097 assembly in the picture.
View 1 Replies
View Related
Apr 12, 2013
For some reason, all of my selection tools (like marquee tool) become invisible as soon as I let mouse 1 go. So I can't really see what I have selected, however I can modify my selection, cut it, transfor or do anything else I want..
View 3 Replies
View Related
Jun 26, 2013
My photoshop elements 11 seems to be completly screwed up. The brush tools and/or healing tools that normally bring up a tool menu at the bottom of the screen have only half of the box visible. I cannot change the options because only half the box is shown or none of the options are visible. Its like only part of the code loaded what is spposed to appear.
The side menu is also missing parts in the very bottom left corner.It seems like it has something to do with the screen resolution on my macbook. But this is the only program that has the problem.
I have a retna display macbook 11.I am so frustrated with PE 11, and do not understand why everyone thinks itis so fantastic.
View 1 Replies
View Related
Sep 10, 2008
I am trying to make a macro that adds the vendor column to the end of a parts list, sort by it first, then by part number, renumber the parts list, then save the overrides to the BOM. Everything works great except for saving the overrides to the BOM. The item number sort order gets jumbled back up. I am using Inventor 2008 Pro SP2. Below is the
Public Sub SortPartsList()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oPartsList As PartsList
Set oPartsList = oDoc.ActiveSheet.PartsLists.Item(1)
Dim oPropsets As PropertySets
[Code]...
View 5 Replies
View Related
May 8, 2013
I'm currently using the "Make components" feature to convert solid bodies into parts. This works great, but we use this method to construct angular roof structures, and after the parts have been made the parts have angular relationships to the .ipt files UCS co-ordinates. It would be very useful if I could align the longest edge of the part (Which is a timber truss) with the x axis in the model space and "lay" the plank flat on the X-Y plane.
View 4 Replies
View Related
Nov 27, 2012
I have a user having an issue with drawing pipe networks. When they draw the pipe, the structure is not visible. A label shows up, and the structure can be found in the prospector, but is not editable in the plan view (see attached image).
I have a feeling it may be an issue with our pipe networks parts list and pipe catalog location. We have found an issue with our install that defaluts our pipes catalog to our local drives, but our parts list were created using a network drive. Several users have had an issue creating pipe networks when this has happened. However once we switched the pipe catalog to the netowrk drive the issue was resolved.
When we changed the pipe catalog location, it did not resolve the issues.FYI - I have tried the basics (layers on/thawed, pipe structure style layers on/thawed, audit and purge).We are using Civil 3D '09.
View 2 Replies
View Related
