I create a helix, two turns, base diameter = top diameter = 3, helix height (each turn) = 2.
Why when I look it from the top view, its shape is not a perfect circle?
Should it be a perfect circle when it looks from the top view, isn't it?
How to make it perfect circle when it looks from the top view?
I have never been able to make a perfect circle (eclipse). They always come out lop sided even a little bit in my best try.
I know there has to be a way to do this. I don't even pretend to know what the Radius X & Y and Center X & Y are for.
How to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.
View 2 Replies View RelatedI am trying to make an oblong shape, then a work path and then stroke.
I select the elliptical marquee tool, hold down shift and form the circle, seems easy ..... i go to the paths tab, make work path and the stroke path and you would think it should be a perfect circle. Its not !!
Its as if the circle is hand-drawn in three places, really strange, it just veers in and back out again from the line it should be taking .... it is realy strange.
I closed PS down and double clicked the icon and held down shift, CTRL and ALt and choose to remove the history, and tried this again ... but still the same?
how to create a perfect circle, but how do I create that circle perfectly around a certain point or around the center of my square image (whose coordinates should be 50% of width/50% of height of my square image).
My second question is rather stupid.. Since this program was created to be a substitute for MS Paint and also has .net in the name... but will there ever be a linux version? I firmly believe that PDN would be more than capable competition to gimp.
want to cut out a perfect circle in photopaint. it is a picture with a perfectly circular object so I want to overlay the circle tool and cut out the circle and save the circle on a page with the gray and white square background. I cannot get the circle positioned or sized properly because once the cursor is let go you are stuck with what you have. I typed in "circle" in the help and nothing even comes up for circles.
I can make a perfect circle and position it in draw but that is not useful.
Is this possible? Basically, I have a few hundred photos (in RAW format) that I wish to mask then cut/paste on top on another layer in Draw; however, they are all circular and all would be the same size give or take a few hundreds of an inch. This is not a very easy thing to do by eye with the circle mask tool in PhotoPaint.
Perhaps there is another way to do without, masking from PhotoPaint, but I can't think of it.
I have a helix I've made, and I want to turn it into a thread in a hole I've already made.
I'd also like to make a matching bolt to fit the said thread. Keep in mind my thread speficics are not importan this is all merely for a proof of concept.
I do know know if auto cad offer a say to make a bolt and so on w/o too much work -but I've attached the said file and the helix I'm concerned with is in the "threads" layer.
I'm making a logo for someone by hand-drawing a font I made up. But because I was having trouble drawing a perfect letter 'O', I'm using the "Circle/Ellipse" tool to do it. I drew an 'O' with that tool that's almost the right size... and I wanna draw another one just a little shorter... but I can't figure out how to place the completed new shape directly over the old one.
I don't know where to start the action with the tool! The completed shape always ends up in the wrong place. How to get my finished shape to complete just where I want it to? (Re-sizing the shape won't work because that changes the thickness of the line I used for the letter 'O'.)
How do you create a perfect divided portions of two circle like the dial of a clock, it use to be so easy in previous version now in X6
View 5 Replies View Relatedhow can I control the splines to make a perfect arc. Is there an other way to control the spline with out draging each point of the spline?
View 3 Replies View RelatedSo I have 2 alpha channels. When I try to make a new selection intersecting those 2 alpha channels, there is always about 1 px that is not selected...
In the image the black pixels are the new selection, and red pixels are one of the alpha channels. No matter what I do, I can't make the new selection completely "fill the red pixels".
how to create this effect ? Turn raw picture from camera to perfect looking ?
View 9 Replies View Relatedmirror type effect, combine the two images to make a perfect symetrical image.How is this done?
View 4 Replies View Relatedhow do i make lines crisp when i blow up an image??
View 8 Replies View RelatedHow do I turn this circle off?
View 6 Replies View RelatedI have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedI have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
I am trying to make a circle perpendicular (at its midpoint) to the end of a cylindrical helix in 3D space. I tried using the perpendicular geometric constraint but it won't let me (says "invalid selection"...). Is there a way to make the ucs (z axis) tangential to the end of the helix?
View 4 Replies View RelatedI used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedI am trying to draw a structure like in the structure.jpg. But what I could only draw is just like a structure in cartridge.ipt. There was no other choice except using circle.
Is there a way to make a pillar of eccentric circle?
What are the commands to make a tangent line from one circle 90 degrees to the tangent line of another circle?
View 2 Replies View RelatedI have updated my RFA library to RY2013 (from RY2011, RY2008 before).
Inside Revit (full, Bulilding Design Suite), the preview pane of the "edit type" window shows for the updated component families the sun path circle centered in a position which is far from the insertion point of the component, always got as intersection of 3 strong reference planes with "define origin" checked. Because of this, the preview of the component is not immediately available and several zoom in operations are needed to give a look to the component. This is the case for 3D views and plan views.
The sun path cannot be turned off and also the origin of the sun path cannot be moved inside the family file.
Any solution for the single component family?
Is there a way to batch turn off the sun path circle in every view of each family of the library and also to move the origin of the sun path circle to the insertion point of the family?
Haven't used AC in a while and hoping this is a simple question, trying to take a polyline (in this case a coil shape) and add a diameter to the line. This 3D object will then be imported to COMSOL for some thermal expansion modeling.
Is there an easy way to do this?
How can I make text go around in a circle? I tried doing arc in the warped text option but it's not round enough.
View 7 Replies View Relatedim trying to skin a jukebox program and im using this button , i need to make it a rectangle with slight rounded corners if possible
Also when i save my image as png file on transparent background it saves with a white square around it and then when i put it into the juke software it shows up some bits of background , am i doing something wrong here?
I am trying to make a perfect circle that is the size of a CD.
I have made guides that are 5" x 5" wide (a little wider than an actual CD) and 5"x5" tall. When I try to create a circle shape or marquis inside of my lines, I can't. I have to make an oval in order to meet my guides.
I thought it was an issue with my units in my rulers. No dice. I tried creating a marquis fixed at 5"x5". No dice. Still an oval. Shouldn't 5"x5" be a perfect circle? A circle with a circumference of 5" would be the same all the way around, right? Or do I need to go back to geometry class?
I have a square that I want to make into a circle, without distorting it. I want to create a circle using it as a stroke... I"m using CS2, can anyone help
I used the transform and the warp tool and got it into a circle, but there were points where it was pinched and it looked stupid.
I thought maybe there was a way to make a circle and use that "pattern" as a stroke for it, but so far I can't figure it out.
i tried making it a brush and needless to say...
We use that square to put around all of our letterhead and official station documents. I've created a CD-Rom media kit of our stuff and want to put it around the edge of the cd label, but unfortunately for me, cd's are round which is not condusive to the template I have....
how to make the circle part of this graphic?
I would like to make something similiar on a black background with silvery gray circle.
I was using a tut on how to make a circle. I clicked file then new then I picked circle and went to drag it to do the circle and the icon was a hand. When I tried to use other shapes the same thing happened. I just bought Creative Suite 4 (Web Premium) and I'm using PS CS4 Extended.
View 8 Replies View RelatedI'm relatively new to gimp and I need to know, how do I make a clean circle? I know how to make a circle, but I would like to make it so that it is not pixely on the outside. Is that at all possible?
View 1 Replies View Related