I have never been able to make a perfect circle (eclipse). They always come out lop sided even a little bit in my best try.
I know there has to be a way to do this. I don't even pretend to know what the Radius X & Y and Center X & Y are for.
In PSPX4 how do I make my text curve in a circle or the like?
View 3 Replies View RelatedHow do I make text to wrap around a circle pattern?
View 5 Replies View RelatedWhen using the oil brush, the color selector circle in the mixer palette is huge. Is there a way to make the selector circle smaller when using the oil brush The dropper at the center of the circle didn't show up in the screen grab.
View 4 Replies View Relatedhow to create a perfect circle, but how do I create that circle perfectly around a certain point or around the center of my square image (whose coordinates should be 50% of width/50% of height of my square image).
My second question is rather stupid.. Since this program was created to be a substitute for MS Paint and also has .net in the name... but will there ever be a linux version? I firmly believe that PDN would be more than capable competition to gimp.
I create a helix, two turns, base diameter = top diameter = 3, helix height (each turn) = 2.
Why when I look it from the top view, its shape is not a perfect circle?
Should it be a perfect circle when it looks from the top view, isn't it?
How to make it perfect circle when it looks from the top view?
want to cut out a perfect circle in photopaint. it is a picture with a perfectly circular object so I want to overlay the circle tool and cut out the circle and save the circle on a page with the gray and white square background. I cannot get the circle positioned or sized properly because once the cursor is let go you are stuck with what you have. I typed in "circle" in the help and nothing even comes up for circles.
I can make a perfect circle and position it in draw but that is not useful.
I'm making a logo for someone by hand-drawing a font I made up. But because I was having trouble drawing a perfect letter 'O', I'm using the "Circle/Ellipse" tool to do it. I drew an 'O' with that tool that's almost the right size... and I wanna draw another one just a little shorter... but I can't figure out how to place the completed new shape directly over the old one.
I don't know where to start the action with the tool! The completed shape always ends up in the wrong place. How to get my finished shape to complete just where I want it to? (Re-sizing the shape won't work because that changes the thickness of the line I used for the letter 'O'.)
How to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.
View 2 Replies View RelatedI've been a long time PaintShop Pro user, but rarely use plugins. I believe I've used some Photoshop plugins on an earlier version, but I can't get onOne's Perfect Resize to work. Here's the instructions for their PS plugin:
[URL]
What's the analogy to those instructions in PSP? "Batch Process" seems the most likely candidate for "Automate", but there's no Perfect Resize options there.
I understand that X6 will load 8LI plugins, is that correct? How about Panels? I've both pointed PSP to the Perfect Resize directory, as well as copied the plugins into PSP's default plugin directory. No joy in either case. Both programs are x86 & x64 and neither makes a difference.
Are there any logs that may indicate whether the plugin is being loaded, or errors if it's not?
how do i make lines crisp when i blow up an image??
View 8 Replies View Relatedhow to crop a circle in Jasc Paint shop pro 9
View 12 Replies View RelatedI know how to get the text on the cirle line but when I type in the text, it will only read from left to right. I want to put my text at the bottom of the circle and have in go left to right with the text right side up. But every time I try and put the text at the bottom of the circle the text is upside down and right to left.
View 3 Replies View RelatedI am trying to make an oblong shape, then a work path and then stroke.
I select the elliptical marquee tool, hold down shift and form the circle, seems easy ..... i go to the paths tab, make work path and the stroke path and you would think it should be a perfect circle. Its not !!
Its as if the circle is hand-drawn in three places, really strange, it just veers in and back out again from the line it should be taking .... it is realy strange.
I closed PS down and double clicked the icon and held down shift, CTRL and ALt and choose to remove the history, and tried this again ... but still the same?
I work with a German version and so I do not know the exact English words of the objects and functions. What I want to do is drawing circles with an outline (I know how to do that) but with a filling (background) colour which has a transparency of for example 50%. Is that possible and how should I do that?
Must I enter the outline and the filling part on two different layers to get the transparency for the filling colour?
I have a layer with a vector circle. I only want to use a segment of the circle. Placing the cursor on the circle does not give the +ADD. How can I put some nodes on the circle so that I can delete the rest?
View 2 Replies View RelatedIs this possible? Basically, I have a few hundred photos (in RAW format) that I wish to mask then cut/paste on top on another layer in Draw; however, they are all circular and all would be the same size give or take a few hundreds of an inch. This is not a very easy thing to do by eye with the circle mask tool in PhotoPaint.
Perhaps there is another way to do without, masking from PhotoPaint, but I can't think of it.
I've been trying to alter a photo to make it look like a crop circle - as in, getting the texture of the (headshot) photo to resemble a crop circle, but still be recognizeable. After several frankly laughable attempts with combinations of fx, ( pastel, pencil sketch, twisty stuff, etc)
View 3 Replies View RelatedHow do you create a perfect divided portions of two circle like the dial of a clock, it use to be so easy in previous version now in X6
View 5 Replies View RelatedI have tried several times to install PaintShop Pro X4 firstly from the download and now from the CD. Every time I end up with a message saying that I already have a copy of the program installed.
View 3 Replies View RelatedPaint shop pro 4. Patches up to date. I am unable to save files my files as .jpgs. I can save them as .psp files however. I was able to save them last week, so something has changed in my settings, but where to look. 10 years using PSP and I have to say...dislike all versions after PSP XI.
View 2 Replies View RelatedI've come across an issue using X6 I haven't seen before. After working on a multi-layer pspimage file, saving it and reloading I can no longer edit one of the raster layers. When the layer is selected with the pick tool it shows the circle with line when mousing over. It was not merged or locked so not sure what's causing this and never came across this with any of the previous PSP versions I've used.
PSP X6 16.1.0.48
UPDATE: Tried making sure it was the top layer and still could not edit the layer. I then made all the other layers invisible and at that point it would allow editing the image. Is there some hidden feature in X6 I'm missing or is this a quirk?
I've just installed PSPx6, downloaded and installed updates. I'm using the 64 bit version and it will not load any plug-ins. I've set the file locations etc.
I've been using PSP since version 7, so I'm pretty capable. This is really making me angry though. It's a useless program to me if it won't utilize my Dreamsuite, KPT, Filters Unlimited, Plaid lite, and Muras copies.
I installed the KPT plug ins from the Corel Content (or whatever it is called) website. They don't show up in X6--64 bit version. That is because they only work in 32? How can I get them to show up in 64 bit?
ps. They show up in X5. I can't remember which one, but I did like one of them.
I cannot edit or adjust photos at this time. the program come up ok but when I click edit there is no picture there. It is the same on adjust. Not sure if I unclicked something or what.
View 5 Replies View RelatedI have had PSP X3 for sometime but have never been able to connect to my scanner. The options for Twain acquire and Twain Source are dimmed. Everything works fine with PSP X2 but since upgrading I can no longer use my scanner. I've tried to log a question with the knowledge base but for some obscure reason I am unable to get that to work.
View 2 Replies View RelatedWhen I try to save a small jpg file I get the following:
"Because of the limitations of the specified file (and possibly the save options you've selected) the saved file will be limited to a merged image. Would you like to continue?"
I'm trying to open some AMD partner logos, and they're in EPS format. I tried opening them in PSPX2 originally, and it gave the error that "This PostScript file is either not valid or contains unsupported features" so I tried PSPX3 and the same thing is happening. I tried opening them in Notepad to see if there was anything in there to identify the program that was used to create them and it appears to be Illustrator 13. I don't have Illustrator 13, so how do I resolve this issue with PSPX3?
View 3 Replies View RelatedI have a .psp image file that the information shows the resolution as 300dpi. When I try to save it as a .png file, the resolution changes to 118dpi. It doesn't matter if I just do a Save As or File > Save for Office > Professional Printing with 300dpi, the outcome is the same.
View 14 Replies View RelatedI am unable to associate any files with PSP 12 Ultimate or 9. I go in under preferences/file locations then choose the type file (plugin, mask...) then choose the particular file to load but nothing happens.
View 1 Replies View RelatedI've never been able to use the Clone tool properly in PSP.You can see that the cloning is blotchy and just isn't right...
View 10 Replies View Related