When i am working in fusion or opening the 3D model (dwf format) in a viewer 3d faces tend to show up on some models and other models some faces disappear. in viewer on product was fine but as soon as i saved it as stp. then opened it in stp. viewer the outer wall was gone.
1. Does this happen to other people?
2. How can i correct this from not happening?
I am experiencing two problems. One is the tool icons in Photoshop are disappearing on the screen. I move the cursor and see nothing on my screen.
The second problem is at other times the proper tool icon and function is not showing up and working. I select for example the pen tool and the hand tool icon show up and the function works as the hand tool not the pen tool?
I couldn't find where this was covered, but I create a dxf from my .ipt files for the machines to cut from. When I RMB on the flat pattern, in the browser, the dxf is created with the bends down. I am needing to do this with the bends up, so when the laser operator stacks the parts cut, the flat will be in the proper position for the brake operator. Is there anyway to have my dxf created where the bends are facing up?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
I'm following a tutorial which involves augmenting an existing engineering drawing. Part of the tutorial involves using the MOVE command.
I've been asked to move a facing brick to a new location, however when entering the co-ordinates the brick moves to a completely wrong position.
Here are the steps I'm going through:
Click Move command;
Highlight brick;
click enter;
Enter first co-ordinate;
Comma,
Enter second co-ordinate;
Then Enter.
However, the image them moves to the wrong area.
I am designing the layout for a 8.5" x 8.5" children's book to be uploaded to an online publisher, and they require a .25" bleed around all the outside edges, except for a no ink area of .125" on the bind side. The document must be set up for single pages rather than spread. The document must be saved as postscript so I can create the pdf using Distiller (per the printer). How do I accomodate a different set of bleeds for facing (even/odd) pages within one Illustrator document?
Here are the guidlines I was given (this is the only image):
[IMG] [URL] [/IMG]
Is this even possible? Or will I need to use InDesign? The document is already setup in Illustrator with an individual artboard for each page, and I'd rather not go through the hassle of transferring it all to InDesign. If I must, though, what is the best option for setting it up as an InDesign document, and how can I adjust these bleeds accordingly while retaining a singlepage pdf for saving as postscript?
I'm making a video for my geometry class where I will be making a cube with it's corners labeled. I would like to move the camera around during the video, but I also want the letters to always face the camera.
View 1 Replies View RelatedI have a InDesign document and I am trying to export to PDF for print. My facing pages are always exported as sinlge pages and I don't know how to prevent that. I can use the interactive PDF as this is for print.
View 3 Replies View RelatedWhen working on a document with facing pages, with previous versions of CorelDraw htting the page up or page down keys on the keyboard would change to the next set of pages.
With Draw X5, you have to hit page up or page down twice to switch to the next set of pages.
Not a huge deal to hit it twice now, but is there a way to set X5 to the previous behavior where with facing pages one page down would take you from page set 1-2 to 3-4?
I've just published to PDF a booklet I created. It will be printed but my client asks me for a screen version to be mailed. The problem is that if I set Acrobat Reader to "facing pages" the front cover (page 1) is displayed with page 2, but I want the cover to be shown alone and then page 2&3, 4&5 and so on until the back cover.
I hope this makes a sense to you.
Is there a way to create such a PDF document from Corel Draw X4?
is it possble to arrange artboards in Illustrator CS6 so page 1 is on its own and pages 2 and 3 (and 4 and 5 etc) are facing each other as they would be in a printed book. In other words the same way as in InDesign?
View 2 Replies View RelatedI want to rotate three objects along a circular orbit, horizontally. But I want the objects always facing camera. I added the three objects to my comp, added a circle shape layer and rotated it to lay horizontally, then placed each object along the circle shape, rotating it slightly for each new object, then parenting each object to the circle once it was in the right place. From there, I added a camera and a null, parented the circle shape to the null, and set keyframes to rotate the null along the Y rotation.
The result is that the objects indeed rotate along the circular orbit, as I want, but they TURN as they rotate, which is not what I want. I've tried applying "Auto Orient...Orient Toward Camera" and "Orient Along Path", neither of which work. I've applied this to the null, the circle shape, and the objects. They all still turn.
Here's a screen for some context: Using CS5, but have a trial of CS6 if that's useful
I am having a problem trying to get text to fit to exact dimensions. Here is a link to a graphic representation of the problem I will explain below: [URL] ..........
This is an example of a plaque I'm working on. The red box Q will be a photograph while the black box will be text (represented by the blue lines). I have a specific body of text that needs to fit inside the black box such that the left margin (segment AB) is exactly 1/2 inch from box Q. Further, the text should also be exactly 1/2 inch from box Q at segment BC, such that the top of the text meets this 1/2 inch margin.
I can't make the text fit correctly. If you notice the text line labeled Z, you'll see that the top of the text does not reach the segment BC, meaning that the distance between box Q and the top of the text Z is much greater than 1/2 inch. If this is the case, the picture in box Q will be surrounded by unequal space on the right (AB) as compared to the bottom (BC). Furthermore, the text beginning at point A and the text labeled X also need to reach the exact margins of the black box to meet the exact dimensions of the borders of the final piece.
When I use something like Text > Paragraph Text Frame > Fit Text to Shape, what happens is the line labeled Y clearly sits to low, making the line spacing force line Z too far from segment BC.
I have a 2 ECW xrefed as images into a drawing which I use as the aerial xref the problem is when I change the UCS the ecw disappears.
So the image only shows when the ucs is set to WUCS - I should also note that just the image disappears I can still see the image frame.
My Coworker has an issue with dimensions disappearing while she is working on completing her drawing. We have tried using Audit..did not work, we thought it was maybe the anno visible tab did not work. She thinks that she did nothing out of the ordinary while working on the drawing. See attached drawing. The drawing is after all but a couple dimensions have disapperaed.
View 3 Replies View RelatedI have inserted blocks into my model space, however when I flick to my layout they dissappear. Also when I pulled a table in from another drawig directly onto my layout the blocks inserted in that dissappear also.
View 4 Replies View RelatedI've got an Educational Version of AutoCAD Map 3D 2010...
I'm trying to plot a drawing and my icons have disappeared.
Did I press something inadvertantly, where have they gone?
I'm writing an essay with pics and so luckily I have a scren-grab to show you...
And what happened next...
Is there any limitation for viewport rotation with connected features?I have number of connected shapefiles that I can see in model view.
However, my paperspace viewport rotated for 70 degree can't show them.
I am drawing a pond levy. I draw the outline of the top of the fill, set that at the elevation I want, then grade it down to the existing surface on a 6:1. The grading works perfectly. The outline of the fill's footprint shows up just fine around the back of the fill, but the toe line doesn't show up all along the front side of the fill, but I still get the slope lines projecting down in the front.
View 8 Replies View RelatedWe are using C3D 2013 and have recently had 3 different episodes where a dwg file was open and being worked in, CAD shut down without warning and the drawing was lost. As in, it's gone. No longer on the network anywhere. These were 3 different drawings in different projects.The drawings were not new, they had been previously created and worked in by more than one user. We were able to find a backup file and did not lose everything but still thinking there has to be something causing this. The machine is a Dell Precision T5600, 16 GB of RAM, only had it for a few months.
View 9 Replies View RelatedI am tasked with tidying up some drawings that have been exported from Vectorworks and it seems there is a fundamental problem with the drawing.
Some lines do not appear when viewing the drawing, they only appear when panning or when I select all. There are some cases where a line disappears behind a rectangle as if it had a hatch fill yet no such thing exists.
I have attached the drawing in question.
I am using AutoCAD 2012 for Mac.
I've had this happen before, but usually after typing in REGEN it reappears. I'm having trouble while I'm drafting the tool tip disppears in the drwing window, not if I select a tool, etc.
View 3 Replies View RelatedWhen working with large plant layouts I sometimes need to copy may things from different parts of the plant. Some large some small. When I zoom in to select the smaller objects i have lost lots of objects that were selected before.
View 8 Replies View RelatedProgram: Civil3D 2010
Upon binding my dwgs to send to clients, sometimes I run across a serious problem. My xref'ed site plans disappear but my xref manager still lists it as attached, the layer manager still has every xrefed layer, and all other xrefs in the dwg will bind perfectly.
I have broken down all complex objects, purged, audited, cleaned up any excess scales, and even created new fresh dwgs for the xref and the drawing in question; all actions have ended in failure. I have even searched the AutoDesk forums for a solution and have found nothing substantial.
Solution: #1 Use RECOVERALL command on .dwg file that the xrefs disappear from. It will remove all proxy objects and excess scales in the file that is causing it to disappear in the first place.
#2 WBLOCK out the dwg file and any xrefs that are disappearing and insert them into new "clean" .dwg files. Must be done to all files.
the legs seem to be missing bits. They were fine and then i added the seat and back and suddenly parts of the leg vanished??? Still not there when i render.
View 9 Replies View RelatedBasically, whenever you want to insert a block from outside of this drawing to it you can see it on the screen but after insertion it is disappearing!
+ There is no frozen layer
+ It happens on Modelspace and Paperspace both
+ It happens just on the blocks that you want to insert from outside
+ I used Design Centre to insert a block same issue occurs. The block is not inserted in to the drawing as a hidden object because it is on the Purge list but you can find it on the Insert Block window dropdown menu and when you want to insert it from there again same issue happens! I guess there might be an AutoCAD variable is playing with us here that somebody accidentally changed it.
+ When you use the Quickselect you cannot find any of those blocks on the drawing as well
When I pick 'User defined' under Pattern, I lose the Angle and Spacing boxes. If I insert a hatch with the default settings of 0 degrees and 1 unit, then double-click on the hatch to bring up the Hatch Creation panel, the boxes are displayed and I can set them to the values I want. This first happened in 2012LT and continues in 2013LT - how to prevent the boxes disappearing?
Dell Precision T1600 Xeo
nVidia Quadro 2000 - driver: AcadDM11.hdi
Windows 7 Ultimate 64bit
2013LT 64bit
I'm laying lines on top of an airial photo and my lines seem to be disappearing under the graphic. I know the lines are there, because they will highlight when the cursuer passes over them. Sometimes the lines will be on top and then under. I know there is something I'm doing wrong but can't figure it out. Is there a "Bring to the Front" like in MicroSoft applications.
View 2 Replies View Relatedacad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
I know the possibility of a plot style just disappearing is slim to none, but I have this user that constantly claims her plot styles have "disappeared".
When I check them, the entire "Plot Style" folder is gone. One day it's there the next it's gone.
She also has this problem with the DWG to PDF print option. It was there, now it's gone. She claims she isn't deleting anything. I will get them back on her PC and a few months later they will be gone.
She is a contract worker who also spends time at her office off site. I am not sure what version of AutoCAD she is using. I manage an AutoCAD group of about 20 users and none have this problem.
I have some blocks with attributes, with the default of some of the attributes being blank. When I try to transfer the block to my Tool Palette, the block loses the attributes that have blank defaults. Why are these attributes disappearing from the block?
View 8 Replies View RelatedI have a problem with Inventor 2013. The dimension lines have disappeared. I've been through all the dimension styles and layers to make sure I hadn't turned one off
All other drawings are fine and if I create another even using the same model it works just fine but I'd rather find out why than re-do the whole drawing.