AutoCad 2D :: How To Setup Custom Palettes
Jan 18, 2013
I am trying to setup some palettes to use at work and am using blocks to do so. What I've found is that my palettes work if I have left the blocks in place in the file in which I am creating the palettes. However, if I have deleted the blocks from the file, the blocks in the paletette will not work. Is this normal or is there something deeper?
View 1 Replies
ADVERTISEMENT
Nov 1, 2012
Is there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.
View 4 Replies
View Related
Mar 29, 2012
I use ACA 2012 on two seperate computers and would like to be able to have all my custom tool palettes, blocks, customizations, etc.. to migrate to both computers. I.e. I add a new tool to a tool palette on one computer and then when I'm working on second computer that new tool appears in palette in correct location. I would think the easist way to do this would to be to share the location of the tool palettes, customization files, etc.. at a common place (network share) but am unable to find all the files and settings to do this.
View 1 Replies
View Related
Aug 23, 2011
I have a custom tool palette all made up, it has three palette sets and 8-12 palettes per set.
Now, is it necessary to add the palette sets and palettes to the content browser before sharing the .atc file around the office? Also, once added to the content browser, I cannot change the properties of a block e.g. scale, layer, rotation prompt etc..
View 1 Replies
View Related
Mar 27, 2012
So I am trying to create a TP that has a few commands on it... the problem is I dont know where to start in order to make everything available to the others on my network...
I have created a new GROUP, dragged a palette into that group, made my commands, and they work on my PC... but how do I get them all so everone can see them. Exporting the "command tool samples" and importing it as "My layers" works, but the name is still command tool samples and breaks the actual command tool samples...
C3D 2010
View 3 Replies
View Related
Dec 16, 2010
I've made some custom tool palettes that are on the network. I just have them pathed in the options, and set up as a group for users to access. Civil 3D is real sluggish when it comes to using these, and switching between the tabs, and trying to load them up. But Vanilla AutoCAD loads them and switches between tabs no problem. Is there a variable specific to C3D that needs to change to make it work more like it does in Vanilla AutoCAD?
View 9 Replies
View Related
Jan 24, 2012
When I try to import my custom tool palettes onto my co-workers computer, his machine does not see the xpg.
My machine is a 64 bit computer and his is a 32 bit.
Is there a way to convert the xpg to a different extension or will I have to set up his palettes from scratch?
View 2 Replies
View Related
Feb 7, 2012
I just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
Still there is no 'refresh' option...???
View 2 Replies
View Related
Dec 2, 2013
How do I migrate my Custom Tool Palettes and Custom Toolbars from Civil 3D 2012 to Civil 3D 2014?
What files do I need to create or copy to transfer to 2014?
My Custom Tool Palette consists of Block Symbols, Border Sheets, Scales and Seals, Lisp Routines etc.
My Custom Toolbar is just a number of standard cad commands I've put together in my toolbar like Revision Cloud, Layer Isolate, Match Properties, Attach Image, etc.
Do I need to export out my cui file, do I need to create a Profile file, do I need to setup the same directory structure naming and copy my files into those same directory names?
Or is there some easy hidden Magic Button in Civil 3D that you click on and it does the rest?
View 3 Replies
View Related
Sep 12, 2013
I am trying to edit a custom palette externally and have successfully done it in the past but now Draw is "breaking" my new palette.
I created a new palette within Corel Draw and added a single color. This is to create the XML file and generate a unique GUID. I can open and the close this palette with no issues. I can add colors via Draw with no issues. I then close Draw. I then open the file with a text editor (NotePad) and add the code for my new colors (pulled from a spread sheet). My code matches the code in the Draw-generated palette color. It also matches the code from another palette I successfully created over a year ago. The file saves just fine and can be reopened in the text editor. I then reopen Draw but my palette name is no longer in the palette list. Then if I manually try and add the palette by opening it, it opens but strips all colors. Then if I open the XML file with the text editor, the GUID is now all zeros and all colors have been stripped from the file. I have tried rebuilding the workspace and rebooting the PC but neither option seems to work.
PS here is a sample line of code for one of the colors I am trying to add.
"<color
cs="RGB" name="RLM00 Wasserhell"
tints="0.980392156862745,0.968627450980392,0.945098039215686"/>"
View 2 Replies
View Related
Apr 9, 2004
I was wondering about custom color swatch formats. Specifically in an ancient version of Photoshop (like 3.5) in addition to the preset swatches, there used to be a blank "scratch pad" type palette feature where you could put colors and smoosh them around just like a real artists palette then pick colors from there....is there anyway to do this in Photoshop 7 without creating a separated doc?
Also, you used to be able to create a swatch palette based on the colors in a given image by going to mode>indexed color ....that doesn't seem to be working for me...
View 2 Replies
View Related
May 15, 2012
Now that I have all my custom properties set up I can't seem to update the custom ones that I made. The custom properties I have added do not seem to work when I update them the through the Sheet Set Manger properties.
View 5 Replies
View Related
Jul 30, 2012
I am running Autocad mech 2009.
I would like to set up Autcad so that when it opens, it opens a custom profile.
In the past, I was able to accomplish this by using the autocad shortcut properties:
"C:Program FilesAutodeskACADM 2009acad.exe" /p <<customprofilehere>>
However, now....i have a shortcut that opens autocad up in xm mode and so the shortcut properties looks like this:
%SystemRoot%system32
undll32.exe %SystemRoot%system32VMCPropertyHandler.dll,Launc hVMSal "Windows XP Mode" "||4f5d99c9" "AutoCAD Mechanical 2009"
is there a way to modify this so that it will open the custom profile when it launches autocad in xmmode?
View 4 Replies
View Related
Jan 30, 2013
I have a custom palette set on two machines. If I save a file on one and then open it on the other, the second machine does not recognize the custom colors and leaves the object blank. I can click on the palette and correct this but can I set it so that the colors will load correctly when I open the files.
View 2 Replies
View Related
Sep 29, 2012
i would like to expand on the Floyd-Steinberg dithered palette examples on this Wikipedia page.
[URL]
Is there a way to tell GIMP to programmatically generate a 6-bit, 9-bit, or 12-bit color palette?
All the dithered examples you see were created by me a few years back, by individually picking grays/colors to construct a custom palette in GIMP, then translating the original 24-bit parrot/color bars down to the custom palette.
For example the 8-color Floyd-Steinberg dithered parrot and color bars, on the Wikimedia Commons. GIMP does an excellent job of making these, and if you squint at it or look at it from a distance, it looks full-color:
Sure, I'll manually create a 16-grays palette or an 8-color 3-bit color palette, but it starts to get intimidating to make a 64-color, or 512-color, or 4096-color palette by individually picking each color, one at a time.
Also, I do not see how to generate the non-regular palettes without a lot of manual custom color picking:
Non-regular RGB palettes
[URL]
View 1 Replies
View Related
Aug 23, 2010
I'm using Corel Draw X5 and I can't figure out how to add or edit colours in the CMYK (default) Custom Colour Palette. In X3 and earlier versions it was quite easy to add new colours and edit existing ones. I would also like to know how to move the order of the colours in the palette so that I can put one a custom colour near the top.
FYI I would like make these changes to the master / global CMYK palette, not just the one for a specific document palette.
View 7 Replies
View Related
May 8, 2012
When I add a profile to Custom Centre to be used in a frame generator, in Base Qty by default it comes up as in, I want it Each. Where to change it?
View 1 Replies
View Related
Jun 18, 2008
how to create an icc profile that I can then select as a proof setup preset? Can icc profiles only be created with the video card or can they be made in photoshop?
View 1 Replies
View Related
Sep 11, 2013
How do I set up a custom document profile in Illustrator CC and save it for future use?
I do not see any way to save it.
View 5 Replies
View Related
Aug 20, 2012
In prior versions of PS, if I added a custom profile under Proof Setup, it would be pinned to the Proof Setup menu (along with the default profiles). That doesn't appear to happen in PS CS6.
Is there a specific place I need to save the custom Proof profiles to so that they will appear in the menu?
View 2 Replies
View Related
May 18, 2011
How to load a custom menu setup on mac? At the command line , where is the command line location on mac?
View 7 Replies
View Related
May 25, 2012
In the past week or two, I took time to re-create the tool button config in PSP14 that I've used for many years in Paint Shop Pro. However, the next day I see PSP14 has reset to the DEFAULT toolbars!!
Why did this happen? Was it failure to SAVE the configuration? Are my toolbars lost now? any way to restore besides button-by-button reconfig?
View 1 Replies
View Related
Nov 10, 2013
What are the folders of my current CorelDRAW installation i can back-up and use them to replace the folders of a new installation so to retain all my settings (workspaces, customizations, shortcuts, settings, plugins, etc)
I need to uninstall and re-install my current installation
View 4 Replies
View Related
Jun 24, 2012
Photoshop CS6 on Mac.
Edit an image file and get it to where I like on the monitor.Duplicate the file and set the new file to the profile for the printer which will be used, by using View > Proof Setup > Custom and setting an imported printer profile for the printing company that I use.
Edit the soft proof file to get it to where it looks good again. Save off the file for the printer and also save the new PSD file.
Close the PSD file.Reopen the new (soft proofed) PSD file.Still looks good, but.... when you check View > Proof Setup it's now generally set to Custom: U.S. Web Coated (SWOP) v2 instead of to the imported printer profile which was set previously. WHY???? Where did the printer profile go? Is it supposed to do this?
If I then reset View > Proof Setup to the correct printer profile, the image goes to crap again.
View 27 Replies
View Related
Jun 7, 2013
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
View 1 Replies
View Related
Feb 21, 2013
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
May 16, 2013
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
View 1 Replies
View Related
Mar 12, 2012
I have been using AutoCAD 2006. Our company is switching to AutoCAD 2012 LT. I want to be able to add my custom toolbar buttons from the 2006 to the 2012 LT custom Ribbon Tabs & Panels. I have figured out how to make the custom ribbon, tab and panel. I just haven’t figured out what I need to do to get the old stuff to where I can add them to the panels.
I have custom 2006 buttons with and without flyouts.
View 9 Replies
View Related
Nov 27, 2013
When I drag a previous custom command into an existing custom tool bar and edit the custom command (then rename the command in the Name and Command Name) it also changes the previous custom command that I originally drug into the toolbar. What am I doing wrong?
View 2 Replies
View Related
Apr 4, 2013
I am trying to create custom Materials in Inventor 2013. I have been able to create the custom appearances I want use on the materials and store them in the Inventor Materials Library.
After creating the custom appearance, Ive created new materials. When I try to change to new material appearance from default to my custom appearance, upon hitting the 'apply' button I get an error message which reads, 'failed to updated style'.
View 1 Replies
View Related
Nov 9, 2012
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies
View Related