I was making a facade in ACAD but I accidentally deleted from my hard disk the attached images I used for textures. So, I decide to replace them with another similar texture, but, while I change the path of the file I lost my boundary area.
View 4 Replies
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
I was trying to change an attribute and lost the "imperial door" dynamic block. I do not know where to find the original and replace it in the tool palette.
View 3 Replies View RelatedI'm having a small problem in AutoCAD 2012. I can't get any grips on any inserted raster image Cpipping Boundary I try to edit. I can select the edge and the line turns into a dashed line, however no grips. The grips work fine on any vector line. Is there a comand to turn on the grips?
View 6 Replies View RelatedI used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I am making a business card in Illustrator 6.
I placed an image of my black signature with transparent background on the white background business card, and now it is leaving a box were that signature image canvas ends. This happens with both a .psd and .pnd files.
Now if I could just go into photoshop and extend the canvas and leave the image the same size that would be great. When I try to do this though there is still the old canvas boundary line.
If I was able to start all over I would have had the original canvas size way wider than the image of my signature that I drew on it. That way it's boundaries would now be outside of my business cards boundries and I would not be seeing those black boundary lines.
I want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
I have an image, I just need to changethe text in that image without changing anything else.
View 5 Replies View RelatedHow do you keep all the image details of an image file when you save it as a TIF? I lose half of mine.
View 9 Replies View RelatedI've got a Macbook Pro running X11(ver 2.3.6) and Gimp 2.6.11 and have had no problems with either until recently. I'm a professional artist with about 5 solid years of experience using Gimp and I love it. I actually own Photoshop and spend more time overall in the Gimp. But now, all of a sudden, I have no ability to do anything it it except rifle through the menus. Absolutely nothing works in the image window because the mouse will not click anywhere inside it. Its the same whether I use the build in touch pad, a USB 3-button mouse or my Wacom Intuos 3 tablet. I know, or at least strongly suspect, that its a focus issue because I can click on a menu item and drop the menu, but clicking outside the menu onto the image area does not collapse the menu! I've searched and searched and I'm at a loss. My Gimps BROKE!
View 3 Replies View RelatedI'm attempting to tilt this image for use in a game im writing. I've been using Map Object and rotation (Y) but this then causes pixel color changes on the boundary with the background color. How would I tilt this picture without getting the problem?
View 4 Replies View RelatedSince I upgraded to CS 5.5 I lost the ability to custom image warp in Photoshop. The icon is gray. how to get it back?
View 15 Replies View RelatedWhile evaluating a few "Instant Effects", the orginal image file was overwritten with one of the altered images. The original image file, which I need, cannot be found.
I did not "Save" the altered image. Autosave is turned off.
Recently I have shifted to Gimp 2.8. I also use picasa to createdescription and upload purpose. Image descriptions created by picasa isgetting lost if I export (after edits) in gimp. Gimp is replacing existingdescription with "x-default".
View 1 Replies View RelatedGimp 2.8, Windows 7
After I open a create new image, the cursor disappears and the last tool I choose (rectangle...) appears and the cursor (arrow) disappears. Is this standard or is there a way to exit from the tool box and use just the arrow cursor?
I have many documents I need to convert to HTML. I need the images in the documents to be links. This has worked fine, according to normal procedures if the images are png, jpg, or gifs. However, most of my images are not those formats. So if I have an eps, pdf, and tiff in my document, upon html export, there is no hyperlink. That is, the <a href></a> tags are not in the HTML at all. But if I convert the images to png, jpeg, or gifs, put them in my document, then choose that file format for conversion, the links work fine.
I want to say there is an issue with the link tags upon file conversion. It could be something else, but I am not sure why it works for certain file formats and not others. I figured ID would keep the association with the hyperling after converting an image from say and eps to jpg. Any way to keep hyperlinks for images after exporting to HTML.
(I can obviously add the link tags myself in the HTML, or convert the images myself and put them in the docs, but I have many documents and would like some automated way.)
you've zoomed in to start this painstaking freehand selection withlots and lots of points, and when you get to the end, nothing getsselected. Then you notice that, once again, you had done a Select Allsome time ago (invisible because you zoomed in) and forgotten to SelectNone before clicking the lasso.
What do people do to avoid this? (I know the obvious answer is "rememberto check what your selection is all the time", but that's seriouslyflow-disruptive.)
GIMP could blink the image or something when you add selectionpoints that don't increase/decrease the already selected area, but Iguess that might take some time to implement.
How do I get back the scaling tool when highlighting an image in CS3 that I have lost?
View 4 Replies View RelatedI know the title sounds weird, but I am having trouble keeping my levels from reverting back to their default look when saving as a jpeg or attempting to flatten or merge my layers. I can attach a link to the PDS if you would like to take a look at it. The layer that is losing its levels settings is called "Stars". I don't change my levels often, so I am sure its something I am just missing. The levels are just changes on a single layer, as stated above its the layer called "Stars".
View 3 Replies View RelatedI was wondering if there is a way to change the image for the splash screen? I've attached a screen shot. I'd like to edit the screen to show a company logo.
View 6 Replies View RelatedWhen I import my photos from my hard disk to the organizer the image number does not come with it.
View 2 Replies View RelatedSo we've been sent a DWG file for a large site, that includes a massive aerial (TIF) image.
At this point it's too large to even work with so I'd like to scale it down (proportionally, so it will still maintain the same aspect ratio).
For simplicity sake, lets say the image is 15,000 x 15,000 and I want to scale it down to 5,000 x 5,000.
The problem is that AutoCAD seems to use that pixel size to determine the actual scale, so when I updated the new (smaller) image, it was also 3x smaller in the world.
How do I scale down the image independently of the size so it will still maintain the same scale in the CAD world? (I'm a 3D guy so this is akin to scaling down a texture, yet having the plane its projected on maintain its original scale.)
why I get an error trying to hatch this. Its a closed Polyline.
Hatch issue.dwg
Edit: Or rather its 4 joined polylines.
I am looking at a large area with approximately a thousand parcels in a shp file. The polygons of course are independent and the lines sometimes don't touch or they overlap. I want to be able to draw a perimeter around the parcels. What is the best way to draw a boundary? I have tried exploding the polygons and then delete all the non essential lines and then try to create it that way but pline edit and join doesn't work and when you are looking at 10000 segments and the overlap issues or not even touching. I am just trying to save hours if possible.
Infrastructure Design Suite 2012 - Premium, Intel Quad Core 2.66 Ghz, 8 GB Ram, Nvidia Quadro FX4800
So I have a reference that has been xclipped. We have multiple drawings that need to be xclipped using the same boundary. It is a HUGE boundary and very complicated. It would take me at least half a day to recreate it (the time it took me in the first place). I copied the drawing and am trying to find a way to essentially explode the boundary in order to create a new polyline. I don't care about the reference, I just want the boundary.
View 2 Replies View RelatedI have a problem in that a customer drawing, actually several cutomer drawings are not closed polylines. tHEY ARE REASONABLY SIMPLE PROFILES THAT i NEED TO CUT OUT ON A CNC ROUTER. mY PROBLEM BEING THAT AS THEY ARE NOT CLOSED the router software will not recognise them properly. Is there anyway to find out where exactly on the profile the gap is with zooming right in and panning around?
View 7 Replies View Relatedevery time I try to hatch it come up with ‘Unable to hatch the boundary’ and it does this with all hatches except the SOLID hatch, why this is!
View 5 Replies View RelatedI wish to hide my associative hatch boundaries. Is this possible to do as a permanent rule?
I have seen that you can apparently put them on a different layer then turn them off.
I used the select similar command but it chose all polylines (which i guess is what a hatch boundary is?)
I'm trying to label the boundary of a property. It has straight lines on sides and curves on top and bottom. i managed to change the style of the text the way I want it (radius and length above, delta below). The problem i have is that I don't know how to change the height of the text. The option under "Text properties" in "Edit Label styles" is shaded ( I cannot change it).
View 7 Replies View RelatedI have a series of images that are color photos of a three-dimensional, cream colored object. The objects have clipping paths around them and sit on a dark background. I have some new images that I need to incorporate into the layout, but their color is a different "cast", more gray than the other cream images.
I would like to apply the original color to the new images. It would be best if this could be done in the InDesign document, but if necessary, I can do it in Photoshop.
i have been using fireworks for quite some time and it has done everything i wanted it to but now i have hit a roadblock. i have an image set on a blue background and i want to change background color to a dark grey and i want to completely change the image to a dark green. is there a program in photoshop that will do this for me?
View 1 Replies View Related
