I'm trying to label the boundary of a property. It has straight lines on sides and curves on top and bottom. i managed to change the style of the text the way I want it (radius and length above, delta below). The problem i have is that I don't know how to change the height of the text. The option under "Text properties" in "Edit Label styles" is shaded ( I cannot change it).
View 7 RepliesI have a bunch of GIS points that have been inserted into a drawing. All the points have data associated with them, gpm values, that I would like to make more clear. Is there a way to filter and color code them with out doing it by hand?
View 3 Replies View RelatedHow to remove the view label text which is attached to a detail boundary? I know that if you double click ont he etxt you can manually delete it from the format text window but I want edit the default setting so that it doesnt appear on creation.
See attached image.
I am trying to do labels that depict my logo. When I put the logo in the corner, the outer boundry overlaps even though the logo is within the label.
Print preview message says one or more components tresspass printable area. I have only entered the logo. The background on the logo has been removed.
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
Is there a way to control which of two 'Graphic Property definitions' are used via a formula property with a IF, Then, condition statement?
View 3 Replies View RelatedI have two related properties... One is a formula property, the other is a manual property.
In the formular property I'd like to set the value of the manual property.
I used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I have been trying to find a method to extract custom properties from the custom property bag.
I have been able to extract the property value, using the "GetProperty" and the associated "GetValue" method, this method works when I know exactly what property name I am looking for. What do you do when you don't know the property name?
here is my code snippet..
dim myProps as acsmcustompropertybag = mysheet.getcustompropertybag
dim myProp as iacsmcustompropertyvalue = myprops.getproperty("SOMENAME")
dim myPV as string = myProp.GetValue
what I want to do is:
dim myProps as acsmcustompropertybag = mysheet.getcustompropertybag
dim myPN as string = ??????????.tostring
dim myProp as iacsmcustompropertyvalue = myprops.getproperty(myPN)
dim myPV as string = myProp.GetValue
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View Relatedwhy I get an error trying to hatch this. Its a closed Polyline.
Hatch issue.dwg
Edit: Or rather its 4 joined polylines.
I am looking at a large area with approximately a thousand parcels in a shp file. The polygons of course are independent and the lines sometimes don't touch or they overlap. I want to be able to draw a perimeter around the parcels. What is the best way to draw a boundary? I have tried exploding the polygons and then delete all the non essential lines and then try to create it that way but pline edit and join doesn't work and when you are looking at 10000 segments and the overlap issues or not even touching. I am just trying to save hours if possible.
Infrastructure Design Suite 2012 - Premium, Intel Quad Core 2.66 Ghz, 8 GB Ram, Nvidia Quadro FX4800
So I have a reference that has been xclipped. We have multiple drawings that need to be xclipped using the same boundary. It is a HUGE boundary and very complicated. It would take me at least half a day to recreate it (the time it took me in the first place). I copied the drawing and am trying to find a way to essentially explode the boundary in order to create a new polyline. I don't care about the reference, I just want the boundary.
View 2 Replies View RelatedI have a problem in that a customer drawing, actually several cutomer drawings are not closed polylines. tHEY ARE REASONABLY SIMPLE PROFILES THAT i NEED TO CUT OUT ON A CNC ROUTER. mY PROBLEM BEING THAT AS THEY ARE NOT CLOSED the router software will not recognise them properly. Is there anyway to find out where exactly on the profile the gap is with zooming right in and panning around?
View 7 Replies View Relatedevery time I try to hatch it come up with ‘Unable to hatch the boundary’ and it does this with all hatches except the SOLID hatch, why this is!
View 5 Replies View RelatedI wish to hide my associative hatch boundaries. Is this possible to do as a permanent rule?
I have seen that you can apparently put them on a different layer then turn them off.
I used the select similar command but it chose all polylines (which i guess is what a hatch boundary is?)
In ACAD 2013 When selecting a block that is xclipped the xclip boundary is visible as a dashed, editable line. The editable dashed line is also selectable even though it is not visible when the block is not selected.
Is there a way to turn off the selectablity of the xclip boundary, so that I am not selecting blocks when I click near the xclip boundary limits even when I have my XCLIPFRAME set to 0 and the boundary is not visible?
I'm having problems creating a boundary patch on the attached model, Its a Y-Pipe joint in 3 planes that I'm attempting to split in half. I've used a silhouette curve to create a centre line in a 3d sketch then joined the ends together, however when I try to select the lines to create the boundary patch it only allows me to select some not all of the lines.
View 4 Replies View RelatedI have survey data of the inside floor of a pond ( the pond has a flat floor ). The surface made from the survey data needs to extend to the outline of the pond instead of the outline of the survey points.
I tried the smooth surface method of kriging with a grid base and I sellected the outline of the pond for the output region and that worked somewhat but there are still gaps between the boarder and the surface.
Is there a method to obtain the overall Site boundary? I have not found one, if there is, but it would sure come in handy when creating reports. We must always include the project Boundary as the first item in a report, so being able to add it to the existing reports would be a huge timesaver.
View 6 Replies View RelatedI have alignments that go in and out of a surface boundary (this is because I have a surface that represents the bottom of pavement.) I want to show the surface profile with the gaps in the profile view (where there is no surface. However in the profile view the gaps are sometimes connected with a straight line instead of being blank.
How can I have a surface profile represent the bottom of pavement properly? (An alignment that is not fully withing the surface boundary.) I know I could add the profile multiple time with different start/end stations But, I don't want that, I want it to be dynamic, as the alignment will change.
What is the command to offset a polyline in all dimension as shown in the attached?
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
I would like to show the title boundary of our site on a profile in a way that is dynamic. Same idea than on cross sections, where you can create an alignment running along the title boundary and then show a block where the boundary lies on each cross section. I know I could project a cogo point where the alignment intersects the boundary.
This method is not perfect because, if the alignment changes and, therefore, the intersection point with the boundary changes too, the cogo point won't follow the alignment, staying at its original location. Hence, I'll have to update it manually. I tried using a feature line, but it seems I cannot show a marker only where it intersects the alignment.
Suddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies View RelatedI am working with a situation that requires me to block some lines underneath some text, and can't use a background mask because the text is located within a block. I tried to use wipeout, but I don't want the boundries of the wipeout to plot. Is there a way to set the boundries to not plot? I have tried changing the color of my wipeout object to 255, but for some reason I was unable to get that to work (I think that has to do with how my company uses plot styles to handle colors).
View 3 Replies View RelatedThe odd shapes are outside the daylight line. They follow a straight-line around the daylight limits (see third attached file), apparently triangulating unwanted areas. I've used a corridor shrink wrap for the surface boundary.
What is the best bet? I'd rather not draw a polygon along the daylight line and use it as a surface boundary, since it could change. Setting a max triangle length in the surface does not seem to provide a desired result.
I've attached a screenshot of the issue I'm dealing with. I have a closed polyline and when I first hatch the area it appears to be correct, but then I'll go do another command and then the hatch seems to extend beyond the boundaries of the polyline.
View 3 Replies View Related