I am trying to do labels that depict my logo. When I put the logo in the corner, the outer boundry overlaps even though the logo is within the label.
Print preview message says one or more components tresspass printable area. I have only entered the logo. The background on the logo has been removed.
I use Civil 3D 2011. I have created a surface from a point group. Now i want to extend the surface to an outer boundary. To do so, i do the following steps:
- Select the surface and Extract the border object.
- Create feature line from the extracted border polyline
- offset this feature line (featureoffset) to outside specifying a offset distance and specifying the elevation difference as 0.
- Add this offseted new featureline as the boundary in the definition of the surface
- Rebuild the surface
Now when i am selecting the surface, I see that the featureline is not a part of the surface and I do not find the contours and the TIN extending to this new boundary. Also I still find the old border in the surface.
Let's say I have a letter 'B' and I want to create an outline on the outer boundary only and not the inner boundary i.e. the two small 'D', how can I achieve that?
View 5 Replies View RelatedI have a known outer boundary for my depo for excess soil. I know how much (volume wise) is going in to the depo. I know that the slope is 1:2.
I do not know where the upper boundary (top of the depo) of the depo is. That's what I would like to find out.
I know that I can create a upper boundary with a feature line and then use the grading and volume tool in order to find out at what height the upper boundary is placed. But then the outer boundary is either too small or exceeds the known boundary.
What is the easiest way of finding out where the upper boundary is? I am thinking about drawing a feature line around the known boundary on top of the EG surface and then using stepped offset. Then I can check out the volume.
But is it possible to do this automatically instead of manually?
I try freezing my proposed storm structures inside Viewport for Existing Conditions sheet. My proposed DI's freeze because they use a block (in structure style). My proposed headwalls use the outer part boundary from catalog. BUT both DI and Headwall Style Component Layers are set to C-STRM-STRC.
In the pic for Existing Conditions Layout, you see a white headwall boundary. In proposed layout, you see a magenta headwall boundary. It's using the Object Layer and not the component layers for the headwall.
I didn't see another way to logically set up Object Layers for Pipes and Structures that contain Existing and Proposed Water, Storm, and Sanitary. My Object Layers have Pipes set to C-UTIL-PIPE and Structures set to C-UTIL-STRC, BUT the Component Layers inside the style are specific. Example: Existing Storm Structures and Pipes have layers such as V-STRM-PIPE and V-STRM-STRC. Proposed Storm would have Component Layers such as C-STRM-PIPE and C-STRM-STRC. The Object Layer for both existing and proposed use C-UTIL-PIPE and C-UTIL-STRC.
How I subivide and get the interior lot lines dito not show over the outter lot? I don't do a lot of parcel work just trying to make it easy for the others
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
When cleaning up a surface, I've always created an Outer Boundary to define the surface limits so that the triangles wouldn't go where I didn't want them.
I'm trying prepping in hopes of sitting for my Autodesk Civil 3d Certification exam at AU. The chapter I'm currently reading through talks about deleting triangles from the surface.
So now I'm wondering about the pros and cons of both methods.
i have a logo with a white background. i want to "lift" the logo from the background so i can add an outer glow to just the logo.
View 1 Replies View RelatedI want is to be able to Add some text to this logo.."CHAT!" at the end of SwankPets and add an outer glow to this text. However, the "layer style" option is always grayed out. I tried doing it on a separte file and then copy and pasting, but the Paste option gets grayed out too!
View 9 Replies View RelatedI'm trying to label the boundary of a property. It has straight lines on sides and curves on top and bottom. i managed to change the style of the text the way I want it (radius and length above, delta below). The problem i have is that I don't know how to change the height of the text. The option under "Text properties" in "Edit Label styles" is shaded ( I cannot change it).
View 7 Replies View RelatedHow to remove the view label text which is attached to a detail boundary? I know that if you double click ont he etxt you can manually delete it from the format text window but I want edit the default setting so that it doesnt appear on creation.
See attached image.
I have this picture, and I would like to put a outer-glow outside the pic, how do I do that?
View 3 Replies View RelatedI'm trying to make a neat planet image for some hobby stuff I'm working on. I have an image (2048x1024) as a texture (from the program Fractal Terrains). I can render it into 3D using Shape3D (AWESOME plugin, btw).
Now I'm trying to add the inner and outer glow on the planet. I guess I'm not well enough versed in PDN to follow it exactly... my results aren't getting me where I want to be (yet, I know it works because others are praising the author).
Anyhow, here's the link to the original Glow tutorial. Here's an example of the type of effect I'm looking for -- the purplish halo around the planet.
I'm trying to renovate my logo. What I want to obtain is a label similar to the one that you can easily find on the back of any Shirt. I mean a label with a simple text on it, with the only problem that it must all be similar to a cotton fabric, either the text (that must be like stitched on it) and the label itself. I would also like to recreate the spin all around the label...
View 7 Replies View RelatedI'm making a map and wish to type the name of a few major areas with big letters - but the letters should not cover up too much, ie I'm hoping to have only the outer edges visible of the individual letters and the inside of the letters transparent.
View 5 Replies View RelatedCan I create a logo using a photograph for my product label?
View 7 Replies View Related1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
I often use gradient cylindrical fill to paint pipes, however if gradient has to fill wide boundry it gets distorted, i found the way of making a short block and scaling it, gradient fill is consistent. It's ok but i want to make a dynamic block out of it and i cant, also if i explode this block gradient fill problem reappears (see pic)
Basicly i want similar looking hatch but without problem.
I'm taking classic movie images, making them into black and white silhouettes and trying to make a montage style thing of some great film noir images. Its all going well, got the making of the silhouette down but now comes my quandary.
Each image will overlap another slightly and where they overlap i want the top one to switch to an inverse of itself. For instance if the bottom layer is black when part of the layer above is overlaid only the section which overlaps becomes white in a kind of checkerboard effect.
Here is an example of my issue, when brush strokes overlap, a darker color is created:
I'm trying to brush with one flat color, with no overlaping effect. Here is a photo of what I'm trying to do, but this example was done with the pencil tool. I want to do this with the brush..I'd like to be able to switch from the top style to the bottom style when needed.
The text"shower"is overlap with the line, how can I erase the line around the text.
View 9 Replies View RelatedI draw a spline (gmask) and when it overlap itself, it will cut a hole. Can we change this kind of setting? I know it's already like this from the beginning but honestly what is the BIG reason to have this behavior ?
Also in gmask node, how to delete multiple spline without going to gmask schematic ? why can't just simply select multiple spline icon and press 'del' ?
I've got the basics, but how do you color in the different overlaps of the circles?
View 2 Replies View RelatedI'm a little surprised with this....
I dont imagine how c3d does this .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Civil 3D (2013) how much you have to improve....
I used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I have a stringy object which is a single closed path. The fill disappears where it overlaps itself. Can I prevent that?
View 4 Replies View RelatedI would like to know if it is possible to do a logo that can be uploaded to a web cms site like Joomla. [1] what format is required [2] what size should it be.
View 5 Replies View RelatedWell..i did'nt know where to put this. I want to recolour a wooden image but the colour overlaps its natural texture. Any solution for this?
View 3 Replies View RelatedI have a picture of an airplane and a company logo. I need to put the logo in such a way that it looks as if it is painted on the wing. For that I need to twist it, rotate it and somehow curve it. I only know how to do the rotation but not the rest.
I am linking an example file with the airplane as the background and the logo as a separate layer.
[URL]
How I remove all white from the logo so i can just have the logo and be able to put it on any color shirt without the white in the background.
View 6 Replies View Related