AutoCAD VB :: Getting Attributes When In A Class Module
Apr 20, 2011
Program, AutoCAD 2010 VBA..I normally use the following code to get attributes from a drawing.
Public Sub array1Initialize()
For Each elem In ThisDrawing.ModelSpace
If elem.EntityName = "AcDbBlockReference" Then
If elem.Name = "SPREAD SHEET INFO" Then
[code]....
The attributes are in an array called array1. This works in my form module but when I move it to a class module I get array1 is not readable. is there any sample code that gets attribute in a class module?
View 5 Replies
ADVERTISEMENT
Oct 25, 2011
I'm trying to create a property in a class "extractTitleBlock" which searches through the "ExtractBlockRef (AttRef List)".
How would I search through a list of the class object above it?
Public Class extractTitleBlockInherits extractBlockRefPublic ReadOnly Property Description_Concantenated() As StringGet'Function to Get 4 Attributes and Return Concantenated StringEnd GetEnd Propertyend ClassPublic Class extractBlockRefInherits extractEntityPublic Name As StringPublic Space As String
[Code] .........
View 2 Replies
View Related
Nov 22, 2012
I am working on custom subassembly and I would need different scenarios for different radiuses along the alignment. Is there a way how to find out this current value?
View 2 Replies
View Related
Jun 8, 2012
I'm getting a "Class Not Registered" message when I try to use the section tool.
(AutoCAD Archtecture 2013)
View 2 Replies
View Related
Nov 17, 2011
I'm working on setting up a process where I can bring AutoCAD drawings into GIS. I need to assign an attribute to a Polyline or Line so that the attributes can be viewed in GIS. I've noticed there is a way to convert AutoCAD to a SHP or SDP however I'm not familiar with this process.
View 1 Replies
View Related
Aug 4, 2011
I used it to clear out the old vertex information, and then add new vertex points.All works on the screen until you use the undo command then all the vertex points are lost. Just created new polylines and deleted the old to fix it. Not ideal as I was storing the ObjectId’s in Xrecords, which now have to be updated with the new id’s
View 3 Replies
View Related
Jan 3, 2014
We use several different classes of steel such as A572-65 or A572-50 etc. Any way to add those values in Inventor 2014 without having to reinvent the wheel?
View 3 Replies
View Related
Jan 23, 2012
From the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
View 5 Replies
View Related
May 22, 2012
Error Message: "Class Not Registered." appears when opening an assembly.
Generally, the errors appears to stop the model from opening.
View 1 Replies
View Related
Dec 10, 2013
I have created one class library project using .NET API. So now I want to convert that project into the Setup project means I want to make installer for it. After that it installed, I want my plug in in the ribbon menu.
View 3 Replies
View Related
Sep 16, 2013
I am just beginning with the 2014 AutoCAD. It continues to tell me to open sample drawings from the "Class file folder" in the text book. I have not been able to locate this folder with the samples in it. Where would this be located?
View 1 Replies
View Related
Nov 30, 2011
I brought in an .SDF file containing survey points into a new drawing.
When I use "style" to format the labels I get the symbol displayed but the text doesn't show up till I hover over the point with my cursor, and they dont stay visible when I move the cursor away from the point.
When I use "Feature Label" I can get a symbol but no text, even if I hover the cursor over the point.
I have set mapsrtyle to "Enhanced"
I would prefer to use "Feature Label" because of the additional features it offers.
View 1 Replies
View Related
Jun 13, 2013
When i attempt to open a dxf file in autocad it comes up with error messages;
Class not registered
View 9 Replies
View Related
Jul 25, 2013
I create a sdf file and add a squema for non feature class, for association with an existing feature class squema property.
But the table is empty andlocked with no chance of adding values. Since it has no geometry, how can I put some rows on it.
I try to import using bulk copy, but then I cant remove or add rows.
How can I insert values in a sdf table?
View 3 Replies
View Related
Nov 6, 2013
How to use the Surface Contour Label Group class in the .NET API.
My first guess was that I had to create an instance object of the class and name it, and then use a "Create" method (e.g., CreateMultipleAtInterval) from there, like this:
Dim labelgroup As SurfaceContourLabelGroup
labelgroup.CreateMultipleAtInterval(arguments)
However, this doesn't work, as Visual Studio told me "Warning: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated."
I tried just saying:
SurfaceContourLabelGroup.CreateMultipleAtInterval(arguments)
But that didn't seem to work either. How this class works and get it to add some contour labels to a drawing?
View 4 Replies
View Related
Aug 29, 2011
So i have managed to get my VBA apps working up to version 2010 (with the AcFocusCtrl). I just upgraded to AutoCAD 2012. For some reason I cannot get the ACFocusCtrl on my VBA userform. When I try to drag it onto the userform, I get an error "Class Not Registered". how I can load that control?
View 4 Replies
View Related
Dec 23, 2013
In "SettingsSampleLine.SettingsStyles" there are the default properties:
SampleLineSampleLineLabelSampleLineLabelStyleIdSampleLineStyleIdSettingsSampleLine estiloLM = CivilApplication. ActiveDocument. Settings. Get Settings<SettingsSampleLine>();string NombreEstilo=estiloLM.Styles.SampleLine.Value;string NombreEstiloEtiqueta = estiloLM. Styles. SampleLineLabel. Value;
but I don´t find SampleLineLabel property in Sample Line Class¿?Is that property in sample line group?
View 1 Replies
View Related
Sep 8, 2009
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies
View Related
May 2, 2012
I can't tell if this is a bug or a "feature."
I have created a custom thread.xls table so that thread callouts are in decimal format per ASME B1.1.
When I use the Hole / Thread feature note in an .idw, the thread class will not show on an external thread. If I change the format to not use Custom Thread Designation, the thread class appears. If I use the Custom Thread Designation on a threaded hole, everything works fine.
View 1 Replies
View Related
Aug 12, 2012
I am wanting to add a field to my pipe parts to store the pipe pressure and stiffness class separately to give me the most flexiblility with my labels is this possible thru the partbuilder interface I got to here but can not see a way to add custum field. There are some extra build in fields like material are they hard coded or can you hack the xml file directly to add additional fields.
View 3 Replies
View Related
Nov 28, 2013
For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies
View Related
Feb 7, 2014
Sharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
View 18 Replies
View Related
Dec 18, 2011
I want to build a class enclosure to go from building to building like the petros towers. I don't know how to make it enclosed.
View 1 Replies
View Related
Jan 26, 2013
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies
View Related
Sep 14, 2012
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies
View Related
Dec 8, 2011
When I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies
View Related
Sep 9, 2011
I see how to put omni class numbers in Families but I cannot see how to put them in the System families like doors.
View 1 Replies
View Related
Jul 9, 2013
How to do a text warp like the top of a class ring similar to this image.
I have tried to work with the mesh envelope tool, but the letters get all distorted and don't run evenly around the corner. I can't seem to get a nice consistent look like this.
View 1 Replies
View Related
May 31, 2012
is there a way to extend existing classes? I am trying to add methods to the symbolItems class, but it doesn't seem to work. says it is not defined:
symbolItems.prototype.isIn = function(parentItem, runThis) {
//do something
}
View 5 Replies
View Related
Dec 31, 2012
I want to scan all divs (objects) with the same class (box)
when any of them are clicked a function in called?
function check() {
var items = document.querySelectorAll(".box");
for (i = 0; i < items.length; i++) {
items[i].onclick = showinfo;
[Code]...
this syntax works in the browser but not in edge;
View 1 Replies
View Related
Oct 17, 2011
I've been using X3 for about 5 years.Today, I can't open the program.... a message appears
"Unable to create a DOM document.Class not registered Verify that MSXML4 is installed."
I have no idea what this message means. I uninstalled the program and reinstalled, rebooted and still the same message comes up. I use this program almost everyday, so, of course, now I'm unable to produce art for clients.
My PC is Dell Studio XPS 8100, 64 bit and Windows 7.
View 5 Replies
View Related
