I used it to clear out the old vertex information, and then add new vertex points.All works on the screen until you use the undo command then all the vertex points are lost. Just created new polylines and deleted the old to fix it. Not ideal as I was storing the ObjectId’s in Xrecords, which now have to be updated with the new id’s
View 3 RepliesI have discovered a 3D polyline cant be joined to a 2D polyline and when i exploded 3Dpline then flattened it ,as recommended elsewhere on this forum,it seems its shrunk in length.The NC router I have access to has to use 2D polyline for the path of the cutter.wish i could simply fed the 3D object into the NC router software and that was all i had to do.
View 9 Replies View Related[URL]
You said that there is no need to flatten, but each method I have tried does not produce a polyline with curves.
I tried:
survfig.BaseCurve
survfig.BaseCurve.GetProjectedCurve
survig.BaseCurve.GetOrthoprojectedCurve
If if manually flatten the figure using a dummy suface with the AeccFeatureElevsFromSurf command, the polyline derived from survfig.BaseCurve will then have actual arc segments.
Is there another method or a way to flatten the figure programatically first?
i'm in action schematic and if i reset any node (for example images/surface) then some parameter is still not affected. For example : the blend type and surface type and couple more are not affected by that reset function. Is this a bug ?
View 3 Replies View RelatedI am working on custom subassembly and I would need different scenarios for different radiuses along the alignment. Is there a way how to find out this current value?
View 2 Replies View RelatedI'm getting a "Class Not Registered" message when I try to use the section tool.
(AutoCAD Archtecture 2013)
Program, AutoCAD 2010 VBA..I normally use the following code to get attributes from a drawing.
Public Sub array1Initialize()
For Each elem In ThisDrawing.ModelSpace
If elem.EntityName = "AcDbBlockReference" Then
If elem.Name = "SPREAD SHEET INFO" Then
[code]....
The attributes are in an array called array1. This works in my form module but when I move it to a class module I get array1 is not readable. is there any sample code that gets attribute in a class module?
Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedI would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedWe use several different classes of steel such as A572-65 or A572-50 etc. Any way to add those values in Inventor 2014 without having to reinvent the wheel?
View 3 Replies View RelatedDue to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedIs there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
Error Message: "Class Not Registered." appears when opening an assembly.
Generally, the errors appears to stop the model from opening.
I have created one class library project using .NET API. So now I want to convert that project into the Setup project means I want to make installer for it. After that it installed, I want my plug in in the ribbon menu.
View 3 Replies View RelatedI am just beginning with the 2014 AutoCAD. It continues to tell me to open sample drawings from the "Class file folder" in the text book. I have not been able to locate this folder with the samples in it. Where would this be located?
View 1 Replies View RelatedI brought in an .SDF file containing survey points into a new drawing.
When I use "style" to format the labels I get the symbol displayed but the text doesn't show up till I hover over the point with my cursor, and they dont stay visible when I move the cursor away from the point.
When I use "Feature Label" I can get a symbol but no text, even if I hover the cursor over the point.
I have set mapsrtyle to "Enhanced"
I would prefer to use "Feature Label" because of the additional features it offers.
I'm trying to create a property in a class "extractTitleBlock" which searches through the "ExtractBlockRef (AttRef List)".
How would I search through a list of the class object above it?
Public Class extractTitleBlockInherits extractBlockRefPublic ReadOnly Property Description_Concantenated() As StringGet'Function to Get 4 Attributes and Return Concantenated StringEnd GetEnd Propertyend ClassPublic Class extractBlockRefInherits extractEntityPublic Name As StringPublic Space As String
[Code] .........
When i attempt to open a dxf file in autocad it comes up with error messages;
Class not registered
I create a sdf file and add a squema for non feature class, for association with an existing feature class squema property.
But the table is empty andlocked with no chance of adding values. Since it has no geometry, how can I put some rows on it.
I try to import using bulk copy, but then I cant remove or add rows.
How can I insert values in a sdf table?
How to use the Surface Contour Label Group class in the .NET API.
My first guess was that I had to create an instance object of the class and name it, and then use a "Create" method (e.g., CreateMultipleAtInterval) from there, like this:
Dim labelgroup As SurfaceContourLabelGroup
labelgroup.CreateMultipleAtInterval(arguments)
However, this doesn't work, as Visual Studio told me "Warning: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated."
I tried just saying:
SurfaceContourLabelGroup.CreateMultipleAtInterval(arguments)
But that didn't seem to work either. How this class works and get it to add some contour labels to a drawing?
Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedSo i have managed to get my VBA apps working up to version 2010 (with the AcFocusCtrl). I just upgraded to AutoCAD 2012. For some reason I cannot get the ACFocusCtrl on my VBA userform. When I try to drag it onto the userform, I get an error "Class Not Registered". how I can load that control?
View 4 Replies View RelatedIn "SettingsSampleLine.SettingsStyles" there are the default properties:
SampleLineSampleLineLabelSampleLineLabelStyleIdSampleLineStyleIdSettingsSampleLine estiloLM = CivilApplication. ActiveDocument. Settings. Get Settings<SettingsSampleLine>();string NombreEstilo=estiloLM.Styles.SampleLine.Value;string NombreEstiloEtiqueta = estiloLM. Styles. SampleLineLabel. Value;
but I don´t find SampleLineLabel property in Sample Line Class¿?Is that property in sample line group?
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies View RelatedI can't tell if this is a bug or a "feature."
I have created a custom thread.xls table so that thread callouts are in decimal format per ASME B1.1.
When I use the Hole / Thread feature note in an .idw, the thread class will not show on an external thread. If I change the format to not use Custom Thread Designation, the thread class appears. If I use the Custom Thread Designation on a threaded hole, everything works fine.
I am wanting to add a field to my pipe parts to store the pipe pressure and stiffness class separately to give me the most flexiblility with my labels is this possible thru the partbuilder interface I got to here but can not see a way to add custum field. There are some extra build in fields like material are they hard coded or can you hack the xml file directly to add additional fields.
View 3 Replies View RelatedHow do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedI have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View Related