How to unselect objects that are be edited with grips.
Dim ed As Editor = Application.DocumentManager.MdiActiveDocument.Editor
Dim Opts As New PromptSelectionOptions()
Dim res As PromptSelectionResult = ed.SelectImplied
res = Nothing
Just upgraded to 2014...How do you 'unselect' objects? It used to be hold down the shift key and click on the objects, but it's not working
View 9 Replies View RelatedWhen you draw a marquee around several objects and you want to eliminate one thing from the selection, is there a way to unselect just one object from being selected without having to unselect and reselect everything else?
View 9 Replies View RelatedSo I am working on a very large project (AutoCAD Architecture 2012) and when I rotate my view, some of the 3D objects will randomly fly out into space. The strange thing is that the grips for the object are still where the object needs to be.
Below should be a picture to explain what I'm talking about.
Grip error.jpg
Is this a bug? Is there a fix? Is this user error?
I have a block which represents a piece of equipment on a factory floor. It has two subcomponents which are blocked with the main equipment. Consider a rectangle and two smaller circles blocked together. Each of the subcomponents (circles) has a point parameter and a move feature so that the components can be moved independently from each other and from the main equipment.
Here's the issue: If a user accidentaly (or purposely) places the grip from one of the subcomponents snapped to the grip of the other subcomponent, then the two seem forever attached; when I try to grab the grip of one of the subcomponents to separate them, both grips get selected and both components move together. At this point the two components appear to be inseparable with the grips permanently joined.
Here's the question: Is there a way to separate the two components once their grips are made coincedent? Or is this a case of "just don't snap the grips together"? I'd like there to be a way to pull the components apart.
I am running AutoCAD 2013, and when I shift select to unselect objects (lines, polylines, etc.) it doesn't unselect but rather a window called "Image Select" appears and asks me which image(s) I would like to select. How I can unselect items on the fly?
View 1 Replies View RelatedA friend came by my desk today and asked me why his AutoCAD would not unselect multiple items when he fences around them. I thought it might be his PICKFIRST setting but that is set to one. What variable controls this setting. His setup only unselects one object at a time whereas my setup will allow me to fence around several select items and using the SHIFT key, unselect all of the objects I fence around.
View 3 Replies View RelatedI've noticed that with selection cycling, while it's handy to select multiple overlapping objects, you'd better be sure about what you're selecting first because there's no way to unselect (using selection cycling).
View 4 Replies View RelatedHow do you unselect the free transform function? I know its control+T to enable it, but can never dissable it when I am happy with the transform.
View 8 Replies View RelatedI know of course that the standard way to unselect anything is to click anywhere on the page that is not occupied. But say you're working on something that's all zoomed in. Then, to unselect things you have to zoom out in order to click off of what you're working on.
Then you have to zoom back in to select something else and work on it again. It gets very tedious. If there is another way to unselect all or select none?
The land measure company just sended me a file of a field they marked on the site. As you can see in the picture below the yellow polyline contains many grips. Because of all the grips my whole drawing is very slow and when i want to hatch the polyline and trim in it it takes minutes to load. My question is how can i change the polyline so i can easily hatch and trim it without waiting that long. Im using autocad 2014 and still learning it.
View 9 Replies View RelatedI usually spend my time using Civil 3D but will (in the immediate future) need to get to grips with the MAP functionality.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I am using AutoCAD Architecture 2012 and on multiple projects I have been working on I have been having objects randomly move when I rotate my view. The strange thing is that the grips still show up where the object is supposed to be. Below is a screen shot to explain what I am talking about.
View 8 Replies View RelatedIn my AutoCAD 2014, after selecting a grip on an object or a point it will snap to other grip points even when osnap is turned off. Is there a command or variable to turn what appears to be an auto grip snap function off?
View 8 Replies View RelatedI moved from acad 2000 to 2009. My crosshair hesitates over every dimension line. Also almost impossible to use grips on the dimension lines. Anyway to turn this off?
View 9 Replies View RelatedSimple problem: When I select a line, normally three grips appear; the ends and the middle. Normally, when I want to stretch (resize) a line I click one end and simply drag it to the desired location. Often it *snaps* to another nearby grip point, the middle selected grip, a line that it crosses, etc. If I zoom in I normally can put the grip any where I want to. It has worked fine up until this morning. Last night when I closed the program it worked perfectly...first thing this morning it doesn't work at all. Restarting the program and the computer had no effect.
The grip will only snap to the other origin (making it zero length) and other random points nearby. I cannot make it a random length...it must snap to those other points, and it *will not* snap to the middle point of the line, which I do all of the time.
Did I accidentally hit a CTRL+ or ALT+ key-stroke which has changed the abilities to snap?
where the tool tips for grips on polylines have gone in 2012? The stretch, add, delete and the convert to arc. I have a feeling that a setting has changed and I can't find it.
View 7 Replies View RelatedWe are running autocad MEP 2014. A co-workers machine that I'm trying to fix has these little boxes showing up next to the grips whenever he draws rectangles. They say "parallel" and "perpendicular"....How do we toggle these things off so they don't show up anymore?
View 3 Replies View RelatedHow can i select obscured grips in 3D?
ex: an extruded rectangle intersects another one just at the end of the extrusion. I would like to extend it further but i'm not able to select the ">" grip. How can I do this without isolating objects, I need them to reference the length of the extension, and so on.
I have created an annotated block of a cut line. In the block editor the grips are located on the ends of the cutline where I need them to be. When I test the block in the block editor the grips are in the right place and the block works fine. However, when I insert the block into my drawing the grips to control the stretch action are located way out in right field instead of at the ends of the cutline where I placed them in the block editor. Parameters having errors. I have corrected the errors but my block is still acting the same way.
View 7 Replies View RelatedIn 2k9 in 3d i used to be able to click on a box and then click on a grip and see the height or width...but now i can't see the dimensions how do i get those dimensions back?
View 3 Replies View RelatedIs there any way to reference a point on a dynamic block to another point to the other dynamic block?
see the attached file.
know of a variable which controls how stretching with grips works. I've got a single machine with Autodesk Architecture 2012 that when I select a grip and move it, then type a dimension in the command line, that the line becomes the dimension I typed, not the amount I moved it. For example, If i have 10" line, select and end grip, stretch it +3 inches or -3 inches, the line becomes an absolute of 3 inches. On all other machines, the line would either become 13" or 7".
[URL]
The dynamic input is off.
I would like to add or customize my multifunction grips. For example, at a pline vertex the m-f grip allows me to stretch, add, or remove it. One thing I'ld like to add is to break the pline at that vertex. It would be faster to use m-f grips than the pull-down menu item I have.
View 1 Replies View RelatedI quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies View RelatedAfter upgrading ACA2012 to Autodesk Building Design Suite (which still includes ACA20012)
The grips on images to resize them to a rectangle for example no longer appear.
The grips still appear on other entities such as lines, circles and rectangle still appear.
Driving me potty as it still works on the systems where this upgrade hasn’t been applied yet.
It’s not drawing specific as this happens on all previous drawings opened on the upgraded machines, but not on the none upgraded.
Using the scale function to reference points at the moment as a very much longer work around, but would like it back the way it was.
I have just noticed when attempting to move the attributes in the blocks of my drawing that the grips have disappeared, where they have gone or how to turn them back on?
View 6 Replies View RelatedI use to be able to stretch a line by using the end grip and typing 50 , this would extend the line by 50 units
The problem i now have is that if i do the same thing thing , the line instead of strecting 50 units the line becomes 50 units long in total
is there a system variable that controls this ?
Using the select breaklines in the prospector doesn't do much of anything in my case. Zoom to Breakline works but how do you determine one particular breakline in the bunch if theye were never named?
View 9 Replies View RelatedI recently updated to 2014. My coworker updated yesterday. When I want to change the location of dimension text I hover over the text grip and the menu appears. My coworker's menu does not appear.She did a repair to the installation but the menu still does not appear. Is there a variable that controls that?
View 8 Replies View Relatedso i select numerous objects and can see their grips. I then go and zoom and/or pan around the place, and the grips disappear!
why is this happening?
Is there a fix?
