I would like to create a polyline in a plane that is not WCS. I am able to do so with the 3D polyline. My problem is that 3D polyline does not allow for a Bulge in the polyline.
View 3 RepliesI found much info on creating 3D objects above X Y plane (which is Z), but I haven't been able to find info on creating objects on the underside of X Y plane (sub Z).
I need to create objects above and below X Y.
I drew the first sketch. i want to insert an offset plane. i use the plane tool, mark 2 sketch entities and a plane is formed. i move it, but it moves only on the plane of the sketch, the dialog box for the distance doesn't appear.
View 3 Replies View RelatedI think I did something with the polyline in my autocad, because it no longer makes lines it makes 4 sided planes. How to change it back?
View 3 Replies View RelatedI'm uploading the .dwg and .txt files. I'm trying to get volume calcs cut and fill between two surfaces and when I compare the data between AGTEK's Highway 3D there is different results. I looked into it to find these random line appearing in Autocad making what seems to be the problem. Where are these coming from and how do I fix? Also, if you could anwser how can I insert a sectional following the 12'-23' offsets and dropping 1.16' down and adding it to my design surface. I want to make a big box there added to design surface.
View 1 Replies View RelatedI'm new to Inventor, less than a month of experience learning by myself. I want to create an ifeature that uses sketches from 2 different planes. I found out how to place a simple ifeature but i'm having difficulty with the multiple plane references. I can select the 2 planes when inserting and tried using the "activate sketch for placement", but I can only reference the first feature, the second one isn't available at that point, therefore does not appear after completion.
View 1 Replies View RelatedI am a relative newcomer to Photoshop CS5. I have been creating a document with a background image layer and a couple of text box layers. The font is set at Arial, italic, sharp. When I save the document as a PDF file, random words appear in bold. I have tried deleting these words in the PSD document text layer and retyping them but they still appear as bold in the PDF file. Interestingly when I save as a JPEG image the bold words appear as normal. CS5 version is 12.0.4 and OS is Windows XP.
View 8 Replies View RelatedI read in this magazine a week ago about making a swatch from an image. I forgot how it was done.
for example, you find an image online and like the color scheme. You can do create a new swatch that has all the colors in that image only.
I am aware of creating a polyline and using .AddVertexAt() to give the points, my question is if I want to create a polyline in acad I generally will pick a point and then type out @10.5<0 or something similar of that nature to pick my next point. Is it possible to add vertices to a polyline in .Net giving it the distance and angle of one point2d to the next point2d?
Example:
acPoly.AddVertexAt(0, New Point2d(0,0),0,0,0)
acPoly.AddvertexAt(0, New Point2d(1,0),0,0,0)
but instead?
acPoly.AddVertexAt(0, New Point2d(0,0),0,0,0)
acPoly.AddVertex ( use code equivalent of New Point2d = @10.5<0 from point at 0 index)
I'm currently facing this problem of lofting/elevating the drawing.
The drawing had all the 3D polyline and I need to join them. I have no problem joining a 2D polyline, but now i'm facing this problem.
see attached. Capture.jpg
I just downloaded 2013, and I am trying to learn how to use it through a book to work with my future school designs. I, of course, have little assignments to do to learn how to work the basics of this program. I am at the point where I am creating a bitmap image onto a plane. I worked it the book's way, and the selected plane did not change to the image I chose; it remained a gray color. I then looked up tutorials online and have the same results. The material editor is changing, but not in the viewport.
View 2 Replies View RelatedI have discovered a 3D polyline cant be joined to a 2D polyline and when i exploded 3Dpline then flattened it ,as recommended elsewhere on this forum,it seems its shrunk in length.The NC router I have access to has to use 2D polyline for the path of the cutter.wish i could simply fed the 3D object into the NC router software and that was all i had to do.
View 9 Replies View RelatedI've read 2013 is going to include line labeling capabilities by selecting 2 points rather than selecting linework. Is there going to be a way to label an area without creating a closed polyline or parcel, where it works the way a hatch works. So if I selecting in the middle of multiple individual intersecting lines, it labels the area.
View 9 Replies View RelatedHow to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedI really need a auto lisp that do lines/polyline on line edges creating a polygon like the example.
View 8 Replies View RelatedI am using AutoCAD 2013
My solid model is imported from IGES file format. I'd like to make a plane at specified location (perpendicular from the surface), and I'd like to have a cross sectional geometry cut by that plane. (attached pic.)
1. How can I make a plane following perpendicular line from the surface?
2. How can I export the cross sectional geometry?
whats the difference between creating a width using layers and using polyline width?
View 2 Replies View RelatedIs there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedI would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedDue to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedIs there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedHow do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedI have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedI can do this in AutoCAD Map but I have my doubts. I will explain in ESRI GIS terms (this is what I am familiar with) and I hope you can tell me if I can do this in AutoCAD Map. In ESRI ArcMap I can select a line and I can hit a Select by Location button. In this window I can select all of the objects that intersect my selected line. Then I can delete them or export them etc.
In AutoCAD Map I have a polyline selected. It is my road centerline. I want to be able to select all of the other polylines that intersect my selected polyline. Is there a way to do this? I need to erase those polylines. Usually I will pan to each of them and select them individually. It just seems to take a lot of time. My AutoCAD co-worker said I could use a fence and draw the fence through my polylines. It seemed to work ok but I accidently deleted extra things that I needed. So I'm back to manually selecting each one by one unless you know a different way.
How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedI've found some example code on how to create Leaderline and have been playing around with it. So far so good, but when I create my leaderline and the Mtext generates, it is always preceeded by an "OK" and i can't figure out where it's coming from. I've tried using TrimStart on a number of the strings to no avail. I know it must be something insanely simple but it can't seem to get it.
using Autodesk.AutoCAD.Runtime;using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.EditorInput;using Autodesk.AutoCAD.Geometry;namespace DimensionLibrary{ public class DimensionCommands
[code]....
I appear to have two red circle which I did not create on drawing in model space. I am assuming it is some sort of error but can not figure it out. On my layout tab viewports containing the section does not show, only the red circle.
View 6 Replies View Related