AutoCAD Map 3D :: XREF - Locate Using Geographic Data
Mar 14, 2011
I am having some difficulty using the XREF/Block insertion using 'Locate using Geographic Data'. This does not seem to locate anything using Geographic Info. I have found a large discrepancy with this process in the order of 100's of meters. I am using SA-17S (dwg 1) in my drawing and WGS84-17S (dwg 2) in the drawing I want to insert.
When I attach dwg 2 to dwg 1 and set the coordinate systems using the assign coordinate system and query in data, everything matched and is coincidental, but when I insert or XREF using the 'Locate using Geographic Data', there is an enormous error.
View 3 Replies
ADVERTISEMENT
Jun 22, 2012
How can I locate the Data Shortcuts Working folder? A surface exist as a data shortcut in a dwg, but the location of the data shortcut folder is unknown and therefore cannot be set in the Prospector.
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 3 Replies
View Related
Jul 10, 2013
my colleague that is on holidays right now sent some civil 3d drawings that contain data references to another office and they are having broken reference issues with the surfaces. I opened the drawing in our office and the surfaces are there and showing the data ref symbols in prospector but when i look through the data shortcuts folder below in prospector the surfaces are not there.
how do i locate the .xml files or if they have been deleted how do these surfaces appear in my drawing.
View 9 Replies
View Related
Jul 8, 2013
I am having trouble with the geo marker and the geographic settings. the file given to us has a pre defined grographic location, (which is incorrect) which is making the file zoom out a lot further than desired. I change the geographic location and the position of the geo-marker, but when I use zoom extends, it still zooms all the way out to the undesired distance. There is no "space junk" out that far, so I do not know what else it can be.
View 4 Replies
View Related
Aug 14, 2013
The way it looks I should be able to edit the propertyset data though an XRef... but all the properties are grayed out. I thought it was because I also had the XRef open... so I closed it. Still the same result.
The discription says "Edit property set data in the current drawing or through external references. Add or Remove property sets."
Am I not understanding the tool - or what?
View 1 Replies
View Related
Apr 11, 2013
Running 2013 SP 1, HF3.
So I made viewframes in my base file which I then xrefed my base file into my sheet file. In my sheet file, the viewframes are no where to be seen. The layer is on, set to plot, has an off color so I know I should see them.
Also if I data reference them in they again do NOT show up. But I can do a Zoom to and I end up at 0,0.
View 1 Replies
View Related
Dec 6, 2012
Autocad 2013 Data Extraction works if I do not include attached xrefs and set it to "Select objects in current drawing". When I check "Extract objects from xrefs"; and go to next it processes for a bit then stays on page 2 of 8 on the Define Data Source page. Also have the same error if I choose " Drawings/Sheet set" with or without the xref objects included.
View 3 Replies
View Related
Apr 16, 2013
I need to import splines which are at an offset relative to geographic positioning and as you can see in the example are all warped. I do not intend to use the splines at this distance, I just need them imported correctly at this location and then repositioned to to work on.
Position: Technical 3D Graphic Artist
Software: Autodesk 3dsMax 2014 - Service Pack 3 (64-Bit)
Website: [URL].....
View 2 Replies
View Related
Nov 15, 2013
I know that in ACAD you can use the xref manager to see where the actual file for the xref resides on your computer/server/etc. What I'm curious about is whether or not the inverse action is possible. Can you somehow access the file (not the output sheet where it's being xref-ed) and see what other files are using it as an xref?
I've come in on a project that is nearing completion and have been assigned the task of "cleaning up the project folder." Unfortunately, there are a ton of files in the different folders that are no longer in use on the final output sheets and I need to keep the ones still in use and archive the ones that are no longer needed. What I've been doing is going through those sheets and reviewing the xref manager for each sheet to see which files are actually put onto those sheets and making a physical checklist from which to organize my findings. Once the checklist is made, I then archive all the files that are no longer being used.
View 9 Replies
View Related
Jul 31, 2009
Is it possible to run a lisp which can extract all the xref names, make a layer with that name and then change the xref on the layer? I have got a similar routine from earlier posts but it doesn't work if any xrefs inserted in paper space (works fine on model space). could change this routine allowing to change the layer of xref in paper space too.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( )
(setq ss (ssget "x" '((0 . "INSERT"))))
[Code].....
View 8 Replies
View Related
Oct 2, 2012
I am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
View 1 Replies
View Related
Sep 17, 2013
when you bind an xref the link disappears from the xref manager.
is it possible to bind an xref, but preserve that link in the xref manager? i realize that will lead to two copies of the same object in the drawing (one xref, plus the new block). everyone's okay with that happening.
View 9 Replies
View Related
Jul 5, 2012
How do I get the full Xref Path name instead of Xref.dwg? I'm scratching my head is this totally under my nose... cause I don't see where the property is stored. I'm getting EV_BDR.dwg instead of C:folderEV_BDR.dwg
View 8 Replies
View Related
Aug 23, 2011
where is the DEFAULT 3D CAD Materials .... I forget the folder... Am using Autocad 2010.
View 2 Replies
View Related
Sep 12, 2012
Is there a property or method that can control the location of the name for a detail view? For example the picture below. Detail "B" represents the api default. Detail "C" representes where I want to put the text. All the properties, aside from "Name" apparently deal with the detail view itself.
View 1 Replies
View Related
Jul 28, 2013
Is it possible to locate where a parameter is used in a part? Looking through every sketch to find a parameter becomes tedious when there are several dozen sketches and parameters in use.
View 2 Replies
View Related
May 24, 2012
I have tried to use intersectwith to locate text (MText or DBText) near a block reference. Some times it works and some times it does not. The hard part for me is understanding why it occasionally works when most examples are just duplicates with modified text and attributes.
My block reference has 4 attributes to the left (Right Justified) of a circle and 2 attributes inside the circle. The text objects are used by some CAD operators instead of the upper 2 lines of attributtes. (Guess they dont know how to modify attributes) I want to locate these texts and insert text into the corresponding attribute.
Block Reference:
Att 1 |'''''''| <-- CAD User will insert a txt over Att 1 and Att 2,
Att 2 | | <-- both attributes are usally left blank or contain a space
Att 3 | |
Att 4 |.....|
View 8 Replies
View Related
Oct 18, 2011
I am working on a project here in Virginia that require crane profiles. I am trying to locate cad files for the grove 900.
View 9 Replies
View Related
May 4, 2011
I have a break line in the drawing that I want to locate within the surface definition , how can I do this?
Civil 3D, 2009
Win 7 Enterprise 64bit
8 GB
View 9 Replies
View Related
Jun 18, 2012
I was working in model space and when I hit zoom extents, I lost all of my drawings in model space. They must be there because I can see them in layout, but I am not able to locate them in model. For some reason my cross hairs and the ability to draft have disappeared too. I am sure I must have hit a setting that needs to be changed back.
View 3 Replies
View Related
Apr 24, 2012
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
View 3 Replies
View Related
Apr 10, 2013
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
View 4 Replies
View Related
Jun 7, 2012
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
View 2 Replies
View Related
Apr 19, 2012
I am trying to link my extracted data from blocks with attributes to an extenal source so that the table I create and place into the drawing already has the formulas I need to due the required calculations. But every time I create and place the table the formulas are not in the table. I include the columes that contain the data but it doesn't seem to be working.
View 2 Replies
View Related
Oct 4, 2011
I am attempting to create my first Title Block with Attributes. I came across this online demo that suggests navigating to the "Projects" Tab - then selectign the "Title Block Setup" tab. I am using CAD 2012 and spent the last hour searching for this command. It does not appear on my navigation or tool palletes. URL....
View 2 Replies
View Related
Apr 16, 2012
After looking thru the api, i'm finding it hard to get a list of orphaned dimensions.
I can get a list of all the dimensions...easy.
I've basically deleted a part from the assembly and now want to remove that dimension in a section view on the drawing document.
But looking / comparing the properties of a non-orphaned vs an orphaned shows nothing.
Is there an orphaned list?
Is there a color override switch somewhere?
Or can I somehow get the object that the dimension is trying to reference and check to see if it is valid or has a valid file reference...or something?
View 8 Replies
View Related
Sep 9, 2011
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies
View Related
May 3, 2013
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
View 1 Replies
View Related
Oct 24, 2013
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
View 2 Replies
View Related
Oct 12, 2011
I know that the xmls are very important in the design data folder and we shouldn't mess with them.What about the rest of the folders. I have around 11 folders. GOST, AEC Exchange, AIT, Cable & Harness, Bend Tables, DWG-DXF etc...
I need to know if any of these folders can be deleted? We don't use AEC Exchange, Cable Harness, BIm Exchange, Design Accelerator, Tube & Pipe.
What about the Optimisation, DXF-DWG. I am not sure if I am using them unknowingly.Does this could be deleted? Is there a procedure to get rid of them.
View 1 Replies
View Related
Mar 20, 2013
Using Inventor 2012 SP2
Have been using Inventor for 6 months or so after being on Solidowrks for many years.
With the settings I have from the start I have been avoiding using adaptivity because it causes more problems than it seems to fix. Just ran into this problem a few minutes ago.
Basic rect angle iron frame, put holes in them for fasteners. Created the cover and constrained it to the frame assembly. Used project geometry to locate all the holes in the frame onto the cover. Use the "Hole" feature and everything is good with the world.
Then changed the side pc of the frame, shortened it by 1.25 inches. Would not update until I deleted the cover and the fasteners. Even then I had to go thru all the constraints I used, edit them back to the number I had used. Once I did all that the frame was the correct size.
I must be missing something serious, it has to be easier than this to use adaptive parts.
View 9 Replies
View Related
