AutoCAD LT :: Rotating Entire Layout In 2008
Aug 14, 2013
I have a drawing I've created in Autocad LT 2008 (wall sections) that are viewed in the sheet on their side, I'm tied of drafting sideways. If I group the entire page and rotate, dimenssions and model viewports will not coorperate in the rotation. UCS will allow rotation for view ports, but the command "plan" will not be recognized in paper space. Taking a landscape LAYOUT view and flipping it to portrait that won't wreck notes, leader, dims & viewports?
View 9 Replies
ADVERTISEMENT
May 14, 2013
So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
View 1 Replies
View Related
Aug 18, 2013
On Adobe Elements 11 can you rotate an insert to a photo without rotatine entire photo?
View 2 Replies
View Related
Aug 23, 2012
I am building my second book with Blurb, this time with LR4
it's going to be a small square and for the back and cover, I have built a file with photoshop and when I drop it to first page, no way I can "slide" it to cover the entire back+ cover
see my problem [URL]
View 2 Replies
View Related
Feb 27, 2013
I have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
View 2 Replies
View Related
Mar 12, 2008
I have a problem installing AutoCAD. When I run Setup.exe I see this error:
View 8 Replies
View Related
Apr 2, 2011
Where is the button to click to change 2009's layout to a "classical layout"?
View 6 Replies
View Related
May 30, 2013
My version of AutoCAD allows me only to Insert DWG, DWF or DGN files.
I need to insert a SID file. How can I do this?
I have attached a screen shot of what is available from the "Insert External Reference" menu.
View 9 Replies
View Related
Jan 9, 2014
I am in the process of replacing my worn out computer! I currently run LT2008 on a windows XP platform. My new computer can either be windows 7 or 8 (64bit) and I wanted to know if I can re-install my LT2008 to the new system? I am soon to retire so do not have the need to upgrade my LT2008 as it will be used only occasionally.
View 6 Replies
View Related
Jan 10, 2012
My AutoCAD LT 2008 Program has crashed and all attempts of uploading it again has not solved the problem. This is the error message I am receiving.
Problem signature:
Problem Event Name: APPCRASH
Application Name: acadlt.exe
Application Version: 23.1.51.0
Application Timestamp: 45d008e7
Fault Module Name: ac1st17.dll
[code]....
View 2 Replies
View Related
Apr 23, 2007
I am using AutoCAD's 2008 DWG to PDF. The quality is good but it does not match the preview. The preview shows the drawing centered. But when I print it and view the PDF, the drawing is off center and cut off. I tried to redefine the sheet size with no borders but it still does not center it.
View 9 Replies
View Related
May 27, 2011
Why one computer is printing everything transparent? I have tried plotting on multiple other computers and everything plots as intended.
View 2 Replies
View Related
Feb 22, 2011
where can i download .shx fonts for autocad 2008.
View 2 Replies
View Related
Oct 5, 2007
Having trouble with the layer merge command. I haven't used it since we upgraded to 2008. I try it on my computer and it doesnt work. Then my boss tried it on his station and it didn't work there either. It recognizes the command but when you click a target it does nothing and just goes back to a clean command prompt.
View 9 Replies
View Related
May 11, 2011
How to connect to SQL Server 2008 r2 by using Map 3D 2012? I can't to make it. It prompts the message "Invalid connection". I used the IP as the service name of map 3d.
View 9 Replies
View Related
Jun 19, 2013
When I start up LT2008, I get a blank screen, but by menu is not laoding (it used to).
I have to open the <File> tab and the it has an menu option I can them load my .cui menu
View 3 Replies
View Related
Nov 12, 2013
I can't see any of the inventor toolbars anymore.
if i would still have the Quick Acces Toolbar this wouldn't be a problem but that one is also gone.
View 3 Replies
View Related
Oct 7, 2011
How can I transfer .dwg files from my old computer (Vista OS) to a new computer (Windows 7) and not have them transfer as "read only"? I have copied the existing files from the old computer to a flash drive and then transfered them using the flash drive to the new computer. They open but as read only. I have tried transfering each folder individually and the files still open as "read only". I have checked the properties on the files and they are identical to those on the original computer and the flash drive. Yet when they transfer to the new computer they come in as read only. I have turned off the "read only" and asked it to override the read only file but as soon as I close and open the .dwg it is still read only. how to make these files active on my new computer?
View 1 Replies
View Related
Dec 22, 2011
I had been using the Osnap Toolbar forever, during a drawing session the toolbar vanished. I've gone to View Toolbars and the Osnap Toolbar is not listed. How do I recreate the Osnap Toolbar or find where it is hiding?
View 9 Replies
View Related
Mar 29, 2012
where do i find the symbols for plants in 2008 AutoCAD? or do I have to create them?
View 2 Replies
View Related
Jul 23, 2010
I have a table in Auto cad ( 2008 ) that I would like to transfer to Excel, I have tried copying the table, and copying the cells, but no good.
View 5 Replies
View Related
Nov 8, 2013
I have a single AutoCAD LT 2008 user who lost the ability to change the case on text in a drawing. Normally, he would highlight text, say it was uppercase, right click to choose change case and he would select lowercase and it would do as designed. Now, it simply deletes the highlighted text.
We've done a repair install with no result. Anyway to restore or fix this functionality?
View 5 Replies
View Related
Mar 25, 2013
I need to make my application compatible with 2008 and have one error saying that ObjectClass is not a member of SubEntId (As ObjectID) in my InsertBlock routine.
Public Sub InsertBlock(ByVal blockname As String, ByVal trans As Transaction) Dim db As Database = Application.DocumentManager.MdiActiveDocument.Database ' Test if block exists in the block table Dim bt As BlockTable =
[Code]....
View 9 Replies
View Related
Mar 29, 2011
I have a problem in loading the color picker in autocad 2008 using the VLAX class module, althought it was working well in autocad 2006.
The following represent the code for the VLAX class module:
Private VL As Object
Private VLF As Object
Private Sub Class_Initialize()
[Code].....
The line code highlighted in red is the line where an error occurs for the autocad2008
What's wrong with this module and also is there another way to call the autocad color picker?
View 6 Replies
View Related
Mar 13, 2013
I have a single user that is reporting that his AutoCAD LT 2008 crashes after he copy's a JPG straight from a Word docyment into AutoCAD. He is the only user reporting this and it just started a few days ago. Nothing has changed on his PC.
FATAL ERROR: Unhandled Access Violation Writing 0xffed4000 Exception at 696e5068h.
It is Windows 7 64BIT.
View 5 Replies
View Related
Aug 13, 2013
Is there a program available to convert newer Autocad files to older versions? I have a 2012 file that I want to read in 2008.
View 2 Replies
View Related
Oct 27, 2011
How do I add and subtract buttons form the toolbars on AutoCAD 2008 LT?
View 6 Replies
View Related
Jul 6, 2010
I am having Visual Studio 2008 installed on my computer and AutoCAD 2008 as well. When i downloaded the ObjArx from AutoDesk and try to install ARX Wizards it says that you must have Visual Studio 2005 installed on the system.how to get the ARX wizards for Visual Studio 2008 ?
View 2 Replies
View Related
Oct 31, 2011
Dimension text is dull in print preview as well as print.
Same drawing if I open in 2011 LT or 2011 full version, no issue
What is the setting I must zoom in to solve this issue?
View 2 Replies
View Related
Aug 23, 2012
I have a user who will be moving to a new Windows 7 computer, for which I have installed AutoCad Civil 3D 2012. They would like it so that all of their settings and preferences are copied over from their current version of AutoCad Civili 3D 2008. Currently the user has windows XP professional.
how to do this as I am unfamiliar with AutoCad.
View 2 Replies
View Related
Mar 17, 2012
It doesn't decal around the object. I'm trying to make it look like a basketball hoop.
View 1 Replies
View Related
