AutoCAD LT :: ATTEXT Does Not Work With Visibility Parameter
May 31, 2012
The attached DWG contains a big block with a visibility parameter which can make the red hatch invisible. This block also contains some dynamic blocks which have automatic attributes and it also contains one attribute (value = 7777).
There are some more blocks for testing in the drawing, some have a visibility parameter, some don't.
All attributes have the same name LAENGE.
Now use ATTEXT on all blocks with the attached template. You will get all attributes, but from the big red block you get only "7777".
Now open the block editor and remove the visibility parameter from the big red block and save it. Then use ATTEXT again - and now you will get all attributes from the dynamic blocks.
How can I get all attributes from blocks with visibility parameter?
(I am using ACAD LT 2010.)
View 5 Replies
ADVERTISEMENT
Jul 2, 2013
I need to know where to look to find if a point parameter is visible the the current visibility state of the dynamic block reference.
View 2 Replies
View Related
Aug 1, 2013
I have this block (see attachment) with three attributes and a visibility parameter that I want to hide one, two or all attributes. It works well while I'm in the block editor but it will not work properly when used in the drawing. The option of "Point only" does not hide all attributes of some reason.
View 6 Replies
View Related
Jun 1, 2012
I am trying to have my block with different visibility options but i don't want a long list to choose from under one parameter. If I did what I am wanting to in one visibility it would be a very long list of different combination options. The list would have 16 different options. Is there a way to have multiple visibility parameters?
View 2 Replies
View Related
Mar 2, 2013
Is there a way to use more then one visibility parameter in a dynamic block in autocad 2013
View 1 Replies
View Related
Dec 17, 2012
What I'm trying to do is have a graphic scale with a set list of scales the user can pick from. This was easy using the Visibility Parameter.
However, I want to add a "custom" vis state where, once they select this option, the attributed definition box will pop up and give them the option to input whatever scale they are using.Check out the attached .dwg to see what I've done so far (I just have the attributes on the "custom" vis state).
View 7 Replies
View Related
Dec 6, 2012
I am wondering if you can set a parameter in a dynamic block in to a visibility layer. Is this possible?
View 1 Replies
View Related
Oct 1, 2007
I'm struggling to hide a piece of such a block (using Visibility Parameter).
View 2 Replies
View Related
Sep 12, 2012
I've got a block with 2 lines of text, the second line being optional. If the second line is omitted, the first line should be moved down, so it's centered.
I can handle the second line being omitted with a visibility parameter. And I can handle the first line being moved down with a move parameter. But how can I link the two?
Ideally, I'd be able to re-use the line 1 attribute and display it in whichever place was correct, but that doesn't seem to be possible.
View 9 Replies
View Related
Mar 4, 2012
I find the visibility parameter a very useful option when building families. Unfortunately it doesn't work when exporting IFC. The elements set to not visible are visible in the IFC exports.
I also experienced IFC export issues with the use of phases.An element created at phase 1 and set to demolished at phase 2, will not be visible in the IFC export of phase 1.
The IFC Exporter for Revit 2012 v1.0.4.msi was used when running into these issues.How to be able to have correct IFC exports using the visibility parameter ?
View 4 Replies
View Related
Jun 27, 2012
How to create a 'No/Yes' or visibility parameter for a title block? I have my Architectural Seal as an image inserted into my title block family. I want to have that as a parameter for visibility so I can have it turned off until I am ready to print for final building department submission filing.
If possible, this would be a global adjustment so I would operate this parameter once and will affect all the sheets in the project instead of having two title block families and swapping those out at the time of filing.
View 3 Replies
View Related
Mar 30, 2012
when in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies
View Related
Mar 23, 2012
Is there a way to turn off visibility on work planes using ilogic? Also, is there a way to change an extrusion type from an assymetrical extrusion to a one direction extrusion using ilogic?
Inventor 2013 Certified Professional
View 9 Replies
View Related
Mar 6, 2013
I went to the trouble of going through my model to turn off visibility for many many planes and axes and points that I did not need to see. I had only a few on that I need. By some flick of the wrist suddenly they are all back on again!! I am now back in a state where I can either see them all, or I hit Ctrl-] and they all go away. I cannot seem to get back to a point where I only have on the ones I want.
So, how do I definitely TURN OFF visibilty for ALL work features so that I can then selectively TURN ON only a few? The Object Visibility tool does not seem to do this. It doesn't seem to do much more than the Ctrl ] or Ctrl / or Ctrl . that I use to momentarily toggle visibility.
View 2 Replies
View Related
Jul 16, 2008
I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
View 4 Replies
View Related
Jul 19, 2013
How to set the visibility of workplanes in an assembly file to false.?
View 3 Replies
View Related
Oct 2, 2013
Is there a way to write a set of rules so that I can switch Work Features On and Off via a Text Parameter.I have an assembly made up of a number of parts used hundreds of times within in various sub-assemblies. If I make a particular sub-assembly 'Invisible' then subsequently 'Visible,' all work features that had previously been set to be 'Invisible' are switched to 'Visible' also.
Likewise if I simple want to set a particular Work Features' Visibility in one particular sub-assembly, I would like to be able to do this via a Text Parameter rather than having to laboriously scroll down the Assembly switching the visibility of features on and off.
At the moment if I turn the visibility of say a Work Plane On in a sub-assembly then all sub-assemblies deploying the same part switch the visibility of that Work Plane on too. Hence I cannot see my work for Work Planes.Obviously the Global Switch under View is of no avail,
So I would like to be able to create a Text Parameter for each sub assembly and in turn each Work Feature with a Yes/No Visibility switch controlled via a set of Rules in iLogic.
View 4 Replies
View Related
Mar 27, 2012
create a usable template file that ATTEXT can use to extract attribute information from blocks. The goal is to construct a small building within ACAD (before the first piece of material is cut or even bought) exclusively from blocks with attribute information for each block and then to extract what will end up being a bill of materials and cost sheet. (in lieu of my normal approach of hand sketching, trial and error cutting and fitting as I go along).
I have read the manual 4 - 5 times, followed instructions exactly (or at least think I have), reviewed postings here (and then trying different way). Nothing works. I have even created a single block in single file with one attribute to simplify it. Anyway, same error comes back every time. The current, extremely simplified, PracticeExtractAttributes.txt (template file) file reads:
BL:MYBLOCK C01500
STICKNAME C01500
with MYBLOCK being the block name and STICKNAME being the tag name for one attribute from the drawing. Same error.
Note: although I use ACAD very infrequently I have been using it since (if I recall correctly) 2.56 back in the 80s and currently use 2000.
PS the ATTEXT will create a DXX file with the information in it (hence my conclusion the problem is in the template file), but that would require me to spend hours and hours writing code to parse the DXX file (once I had the format figured out) to get the info out.
View 3 Replies
View Related
Apr 22, 2013
I am fishing around for information that will abstract my macro one more level. I coded an excel macro to run the following statement on a given set of drawings:
DWG.SendCommand ("FILEDIA" & vbCr & "0" & vbCr & "-ATTEXT" & vbCr & "C" & vbCr & ExtTemplate & vbCr & ExtPath & vbCr & "Y" & vbCr & "FILEDIA" & vbCr & "1" & vbCr)
Yielding text files which I consolidate into Excel to generate a full attribute extraction of the drawing set. My question concerns the extraction template file used in the ATTEXT command (shown as ExtTemplate in the code above). As it stands now, the Excel user must provide the attribute tags they want to extract and then I generate the proper extraction template in the background. My goal would be to eliminate this step from the user side and simply extract all attributes in the drawing instead of a designated few.
If you know a better way to do this using the ATTEXT command or a way to do this without the ATTEXT command at all, I would be grateful to hear it. From my current perspective however, I believe I would need to query the drawing to get a list of all attribute tags it contains, then configure the extraction template to use all the tags from that query. I cannot figure out a way to generate this list of tags. So, that is my question
View 1 Replies
View Related
Jun 21, 2011
I work with land surveying, and I'm a complete newbie to CAD. I use AutoCAD LT 2010, and I am having trouble getting some coordinates from a file.
I receiveda dwg file containing three adjoining lines and two ducts. Now I need to extract the coordinates (x,y) and some kind of point number/name so that I can use the data in a text file or in Excel.
I have tried the ATTEXT command, but it doesn't work. I don't even know if the template file I created is correct, because I suspect the main problem lies in the fact that the points along the line have no attributes.
how do I get the data I need? Do I have to assign attributes to the points before I can extract the coordinates? And what should the template file look like?
View 9 Replies
View Related
Dec 18, 2013
How does the Cost parameter in materials work in Revit? I know you can set a value for a cost. But what amount of that material is the cost associated with? For example, if I set a cost 3.00 for Common Brick, is that 3.00/unit, 3.00/sq. ft., etc?
View 1 Replies
View Related
Jun 14, 2012
When I try to create a filter, I cannot get the Filter Rule to work. Under Filter by there is an option to select More Parameters which then directs you to Project parameters. When I select a parameter, it does not show up in the 'Filter by' box so I can create the rule. I have used this feature in 2011, but I cannot seem to make it work in 2012.
View 1 Replies
View Related
Jun 10, 2013
Attext output file give a lot of extra empty values when template file include attributes from more than one block.
The drawings I want to extract data from has two blocks with attributes. If I make the template file with attributes from both blocks, I get a lot of extra empty values. If I split the template file in two with the attributes from each block in each template file, the output file is OK.
A copy of the same attributs giving different number of values. (Block REV)
Two template files - 'REV','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 6 att)
One template file - 'REV','','','','','','','','','','','','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 17 att.)
How can I get a clean output file giving only the number of values the template file is asking for when the template file has attributes from two blocks? I use ACAD 2010.
View 4 Replies
View Related
Jul 31, 2013
Using Revit 2012 Architecture (64-bit) and Revit 2013 (full version, 64-bit) both gave the same problem.The problem is as follows.I have gotten a Revit file from my university and I need to make a schedule for two type of windows that consists of Family, Type, Count, Cost, and Total cost. This is not really a big deal, just add the parameters to a schedule, sort by family and type, uncheck "itemize every instance". Then create a calculated value called "total costs" with formula "cost" and type set to currency. Then in formatting go to the just created "total costs", check calculate totals and click ok.
Now there should be a schedule with the family, type, count, costs and total costs. But costs stays black and therefore total costs is 0,00.To my knowledge windows have a certain cost associated with them that comes from a database that has values for all structures in revit. So my guess is that database isn't there or for some reason it doesn't work.The file is 100% reliable, since my university supplied it to me and it works for others using the same version of Revit. Also this problem does not only occur with this file or just windows, the cost fields always stay blank. As mentioned the problem occurs on both Revit 2012 architecture (64-bit) and Revit 2013 (full version 64-bit).
View 2 Replies
View Related
Jul 11, 2012
I am having some issues getting a shared Volume parameter to work and report in a tag correctly. I can get the tag to report a value, but it is reporting the a value based on default values of the column (9*2*2) and not the value of the actual column (shown in the properites). Also, the tag I create reports a question mark, not the volume calculated. I've tried this a million times so it could be I have crossed up a parameter somewhere.
View 9 Replies
View Related
Dec 23, 2011
I have user parameters that are no longer needed and are not being used anywhere. They each takes 4-5 seconds to delete, prior to 2012 this would happen instantly.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
View 6 Replies
View Related
Dec 1, 2013
I need to use the dimension created by an action-parameter as a variable in a user defined function but AutoCAD will not allow me (see attached).
How may I access the action-parameter's dimension ?
View 1 Replies
View Related
Feb 7, 2012
it is possible to use a user defined parameter to drive a action parameter.
I have several polar and linear stretch actions i would like to drive from one parameter.
View 3 Replies
View Related
Oct 2, 2012
I need to convert a model parameter to a reference parameter thru the API.
I saw this item discussed in the group before, but I cant find the thread.
View 4 Replies
View Related
Dec 19, 2011
I got a deadline for my project, but I got a big problem:
"I cannot set the "parameter" for the End Value in Parameter Animate dialog"
For easy understand, let's see a example:
1. I got a part which has two parameters named: "A" and "MaxA"
2. I animate Favorited parameter A.
3. The End Value is MaxA_ (Everything is ok)
4. I finish Studio environment, then I change parameter MaxA_ from 200 mm to 400 mm
5. I turn back to Studio environment, the End Value now is "200 mm" (I want this will be MaxA_, so I can animate the flexible parameter).
show me how to keep the end value will be "MaxA_" after I change parameter?
View 3 Replies
View Related
Jan 3, 2013
I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
View 9 Replies
View Related
