how to filtering a part list use view by assembly drawing, with VBA editor or iLOGic code.
there is no class system in API for filter in partlist class use views filter.
i use autodesk inventor 2010, and get install use ilogic add-ons 2010
i want to get automation system for my inventor design.
I'm having issues with Civ3d 2013. I pushed off upgrading because of the format change and the service pack release. I was hoping little glitches would be fixed.Here are the a couple of glitches to date that I saw no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I don't want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipe outs don't work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
another complaint that doesn't have anything to do with AutoCAD, but since I'm venting... we just got a KIP 7100 printer/scanner. WORST printer/scanner we've ever had. Period. Getting the right driver, then getting the driver to produce good drawings to the correct paper size was ridiculous, and the gray shades still look like we're using a big dot matrix printer. Scanning is the most painful thing; compared to the Xerox 6204 we gave up, the quality is poor and PDF file sizes are huge.
Is there a way to reset changes in a partlist. If I have changed in partlist, the changes in BOM can't be shown in partlist. I don't want any "blue" fields in the partlist, they are static.
View 2 Replies View RelatedHow can I get the iPart information in a partlist.
I have a tupe DN 25 iPart where I can control the length, and i'll like to have a text I description field in my partlist that says "DN 25, Length = <actual length>".
Is there a way to avoid 3 digits in numbers from = <Dy> x <Thick> L = <length>, from BOM to partlist.
I only want 104 mm x 2 mm L = 208 mm
When I make a frame, with framegerator the size (80 x 80 x 2) is placed in QTY field, i want to have 1 in quantity and then I place the dimension =<G_H> x <G_W> <G_L> in my own dimension field ! how can I change it, so i don't have 80x80x3 in the quantity field ?
When I make a custom change in a field, is there a way to "go back" to hov the BOM/PARTLIST looked before custom change ?
I have created a drawing from the parametric model assembly where i have clevis, lug plate and pin arrgt.
the model has been generated using the input excel spreadsheet where i have given the inputs like clevis thk, lug thk,pin dia etc.,
while creating the drawing partlist i have included the column of clevis thk, lug thk etc., using the iproperty, but these columns are coming separately, i just want the thk of clevis and lug in the same column so that i will make Bom for the assembly.
How to get the parametric inputs in the same column of the patlist in drawing.
I've made a partlist with these columns:
Item, qty, stock number, part number, description, standard.
stock number, part number and description can me changed in iproperties of the ipt file.
But where can i change standard?
When i insert a partlist in a drawing the insert point of the partlist is in the upper right corner? i want the insertpoint in the lower right corner, because i know the height of our titleblock. Then i will allways be able to possition the partlist right above the titleblock. I never know how heigh the partlist is because the amount of parts in the partlist is different every time. Is it possible to change the partlist insertpoint to the lower right corner of the partlist when its inserted via the API?
View 7 Replies View RelatedIs there a way to export properties such as Moment of inertial to Partlist or use it as a customer property?
IV10 Pro. SP2
Window XP Pro sp2
Pentium 3.2 Ghz, 3.0 GB of RAM
NVIDIA FX 3400 7.1.8.4
I have made up furniture for layout views using the metric detail item template. Probably too many in this model category but it was a short cut to achieving presentation layouts. How can I now filter out certain detail items without zapping the rest. In this case it will be loose furniture but some fixed furniture is needed to remain visible in the next stage construction layout views. I want to do this by view template so that a) the view on sheet can be switched back to the presentation layout and b) keep the sheet as a revision rather than a new sheet.
Its not my preferred way of dong this but I am adapting to another architectural practices standard where sheet numbers are fixed and the layouts (GA's) retain the same number through sketch - tender - construction - as built stages (using a status sheet parameter and revision sequence)
I'm trying to find a way of filtering the 'work in progress' section visibilities from a plan by view filters. The filter I use is 'Sheet Name' equal '<None>'. Then turning off visibility. It works when used in the Browser organisation filters but not in the view filter for the sheets.
I don't want to create a check box or dialogue box for the sheet as this will add to the required maintenance.
Is there anyway for me to check the filtering applied to a parts list (on the drawing) via the API? I looked but couldn't see where to access this information - am I just overlooking where it is stored on the object?
View 2 Replies View RelatedIn my template, is there a way to setup a layer filter or layer state to automatically plot a different viewport color when a new drawing is created and viewports are made? Note, my template does not have viewports premade.
I've set all my Existing and Proposed Utilities to use the WV Miss Utility colors, but I designated either pale (odd color#) for existing and bold (even color#) for proposed so that in model space there's a visual difference. See a few examples below:
V-SSWR-PIPE (color 91)
V-WATR-PIPE (color 151)
C-SSWR-PIPE (color 92)
C-WATR-PIPE (color 152)
Our Civil dept doesn't use colors, but our Utility dept does occasionally especially when Aerials are used.
When we create layouts/viewports in a drawing, it would be nice to have viewport layer colors automatically be set to plot black or gray or be on/off depending on existing conditions sheet or proposed site plan sheet. The only way I know of is if I would set up viewports inside my template with VP Color Overrides preset and/or VP freezes for certain layers, which I'm hesitant in doing.
When I save layer states overrides for a certain view port and mane it e.g. "K", in layer state manager current layer state is shown as "K", but when I change layout and come back to this one, in layer state manager current layer state is shown as *UNSAVED* again!!!
This results in a great problem. If I update layer state "K" it does not update all view ports that should have layer state "K" automatically so I have to go trough all of them again and apply "K" again and again after any change to "K" is made.
Link to other thread: Apply Layer State Overrides to view ports using filter which, if answered could bypass the problem.
specific settings for a filter (Brush Strokes to be exact) but I cannot view the entire window.
View 5 Replies View RelatedHow would I set up a view filter so only curtain walls are showing. Thew will not show up if walls aren't also checked, but I don't want the walls, just the curtain walls.
View 4 Replies View RelatedIs it possible to filter a selection (6 categories checked instead of 10) and make it as a view template?
So that next time I open up this view, only these 6 categories checked in the filter instead of re-doing the filtering again?
Filter photos in the Filmstrip and Grid view?
View 5 Replies View RelatedIs there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedI've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedAfter upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View Relatedhow to show section view in base view with out projection the component.
View 2 Replies View RelatedI have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies View RelatedEach time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View Related