Revit :: View Templates And Filtering Detail Items
Jul 10, 2013
I have made up furniture for layout views using the metric detail item template. Probably too many in this model category but it was a short cut to achieving presentation layouts. How can I now filter out certain detail items without zapping the rest. In this case it will be loose furniture but some fixed furniture is needed to remain visible in the next stage construction layout views. I want to do this by view template so that a) the view on sheet can be switched back to the presentation layout and b) keep the sheet as a revision rather than a new sheet.
Its not my preferred way of dong this but I am adapting to another architectural practices standard where sheet numbers are fixed and the layouts (GA's) retain the same number through sketch - tender - construction - as built stages (using a status sheet parameter and revision sequence)
View 2 Replies
ADVERTISEMENT
Aug 12, 2013
Detail lines have global view settings - you cannot change appearance with a View Template. The Detail Items V/G category doesnt seem to include detail lines.
It is often necessary to use detail lines to avoid the chore of mading up a family to represent simple objects in plan or section - eg complex fixed furnishings like counters and shelves. Then when it comes to doing a schematic electrical layout where I want everything greyed out except the electrical content, I can use V/G overrides on all family content but not the linework. I have to pick all this invidually and then Override Graphics in View.
As with V/G template overrides, I dont want these overrides to permeate globally hence not changing line styles.
View 1 Replies
View Related
Apr 24, 2012
I'm trying to find a way of filtering the 'work in progress' section visibilities from a plan by view filters. The filter I use is 'Sheet Name' equal '<None>'. Then turning off visibility. It works when used in the Browser organisation filters but not in the view filter for the sheets.
I don't want to create a check box or dialogue box for the sheet as this will add to the required maintenance.
View 1 Replies
View Related
Mar 20, 2012
Need to get rid of a couple of CAD links from a detail view, and only that view. How do I do this without potentially deleting the links from other views?
View 3 Replies
View Related
Jun 19, 2013
Should we be able to right click on a detail callout and choose insert on sheet?
View 1 Replies
View Related
Jun 20, 2013
I would like to have two different layouts of my site plan. One is existing and does not show any of the new construction. The other is a complete view of the project. Is there a way to keep the existing site plan dependent while turning off the new construction to show only the previous + demo? If I set up a view template I cannot alter in the dependent view to make the changes that I want as options are greyed out. Is the only way to do this to create them as independent views?
View 2 Replies
View Related
Aug 14, 2013
We are having a problem at our office. We are using REVIT 2014 and In our central model we link in our consultants models and hide what we dont want to see per sheet by using veiw templates. It is all fine and dandy until we have to load a newer model from them in. We delete the old model name the new one the same name once we do this everything we wanted hidden comes back on on our sheets and we have to rinse and repeat.
View 3 Replies
View Related
Sep 23, 2011
I am trying to setup and manage some view templates.
Can changes made in the View Template settings Automatically update in ALL views that are utilizing that specific template, without re-applying? My only way now is to select all the views from the project browser and Apply View Template again. (every time i make changes for that matter)
Some files i work in, other users come in and override lots of the view template stuff on an element basis. Is there a command to reset all overrides for that specific view, or multiple views?
View 2 Replies
View Related
Jul 2, 2010
Using "transfer Project Standards", I'm having trouble getting everything to come across, particularly the V/G Overrides Filters. They are included in the View Template in the original project, but are all missing after transfer.
View 6 Replies
View Related
Jan 28, 2014
I have exhausted search efforts for only one filled region type allowed in a detail view.
What is strange, this trash enclosure wall displays the plan view filled region (referenced via callout), but when I try to show a hatch for concrete and a hatch for metal door, in elevation, the filled region changes "all" filled regions to what ever is chosen.
Then I tried a new circle to see if that changed things. same deal
View 2 Replies
View Related
Sep 5, 2012
What would cause lines to move left/right some seemingly random distance in an elevation view? Rarely, I run into an issue where detail lines and filled regions added to an elevation view (not text, or leaders) will move some random distance, I've attached a PDF showing the issue. No other elevations, plans, or sections have anything wrong with them. The model has not moved to a different position.
View 3 Replies
View Related
Mar 15, 2011
I have an issue where filtering my framing member schedules per Level by, for example, Level equals LEVEL 3 causes the entire schedule to be filtered to empty. We clearly have members constrained to and occuring on LEVEL 3.
The same happens when filtering for, say, at or above LEVEL 3, but interestingly not at or below LEVEL 3, in which case nothing happens -- that is, it still displays members clearly occuring only on and constrained to Reference LEVEL 5.
View 2 Replies
View Related
Dec 25, 2012
how to filtering a part list use view by assembly drawing, with VBA editor or iLOGic code.
there is no class system in API for filter in partlist class use views filter.
i use autodesk inventor 2010, and get install use ilogic add-ons 2010
i want to get automation system for my inventor design.
View 4 Replies
View Related
Aug 21, 2013
I have a Multi-Category Schedule and using certain fields it shows me Furniture, Toilet Assoc., Plumbing Fixturers, etc. All I want the Schedule to show is Furniture and Furniture Systems together in one schedule. When going to the Filter I choose Category>Equals>Furniture Systems and Category>Equals>Furniture. Assuming that the schdule would filter out everything else and only show items from the Furniture Systems Category and the Furniture Category. Instead it shows me nothing, eveything disappears. Its as if it is looking for a Catgory that is botn Furnitue Sysems and Furiture as one. I can do each Category individualy and its fine but I can't Filter by both? How can I get this scheudle to just show me Furniture and Funiture Systems? is their an update to correct a bug in the software that will fix this?
View 2 Replies
View Related
Apr 26, 2012
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Aug 26, 2013
I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies
View Related
Oct 3, 2013
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies
View Related
Dec 13, 2011
I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
View 1 Replies
View Related
Oct 3, 2013
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
Sep 16, 2012
I need to create detail views in a 2d layout drawing. What I mean is that a 'zoomed' view inside a "circle". The view magnifies the specific part of a drawing, but the dimension value keep the same. What command should I use?
View 9 Replies
View Related
Nov 30, 2011
How do I turn this circle off?
View 6 Replies
View Related
Sep 12, 2012
Is there a property or method that can control the location of the name for a detail view? For example the picture below. Detail "B" represents the api default. Detail "C" representes where I want to put the text. All the properties, aside from "Name" apparently deal with the detail view itself.
View 1 Replies
View Related
Sep 9, 2011
I created a custom template family for a 36"x24" titleblock. now, I need to create one for a 24"x18" template family. My issue is, what is the easiest way to do this?
I cannot copy and paste content from one family to another for some reason (unless I am doing something wrong). I was thinking the easiest way is to copy the family, rename it and move the content around so that it becomes a 24"x18" template - BUT - does this affect how it plots?
View 3 Replies
View Related
Apr 29, 2012
how to get templates in Revit MEP 2013?
View 2 Replies
View Related
Feb 28, 2014
I am drawing a set of houseplans in Revit 2014. I mistakeningly started my project in Architecture and did not start in the residential template. Is there a way to change templates easily so that I do not lose all my dimension information.
View 2 Replies
View Related
Dec 11, 2013
I have a flat pattern with ordinate set dimension, taken detail from one end.
parent view having ordinate dimension from left end and i have taken detail view of right end.
i need detail view dimension with same origin dimension as like parent view.
View 3 Replies
View Related
May 14, 2010
How can I move a detail view to another sheet in a drawing in 2009? I have only been able to copy the detail and it's parent view to the 2nd sheet and then suppress the parent view on the 2nd sheet so that only the detail view is visible.
However, when I go back to the first sheet and try to suppress or delete the detail view, it also deletes / suppresses the detail circle from the parent view.
View 5 Replies
View Related
Apr 19, 2012
I know I'v done this before but I'm having trouble getting a detail view to just show the jagged cut lines where it crosses the part only & not all the way around it. See images attached to show the problem.
Inventor Suite 2013 Ultimate
View 8 Replies
View Related
Jan 30, 2013
While creating a drawing yesterday, I noticed that the RMB Options to modify a detail view has disappeared?
- Cutout Shape
- Detail Boundry
- Connecting line
I am not sure how long this has been like this, What I do know is that I had a corrupt model, (Broke when it migrated to 2013) I restored from backup and tested the model in ver 2012.
I can not say if bouncing between the two versions of inventor has perhaps changed something, or of this option has not been available for a while?
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
View 1 Replies
View Related
Nov 6, 2012
How does one remove the boundary box for a detail view? I don't want it sitting in my main view, as this is a conveyor and it's very obvious at to where the drive arrangement is sited. See attached.
I'm guessing changing it to another layer that does not print is one option, or?
View 3 Replies
View Related
