Can I control the Maximum Gap Distance and Face/Edge Distance in the Corner Seam by iLogic.
I want to change between those two in different styles.
Something like this?
If currentStyle = "Kemi_0.6" Then
Face/Edge Distance = treu
If currentStyle = "Kemi_0.6" Then
Parameter("overlap") = 0.8 ul
see also my topic:[URL]
I am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
[URL].....
I see that there is an Inquiry tool for minimum distance between two lines but I can't find anything about the maximum distance.
View 6 Replies View RelatedLet's say I have a 3D polyline, which I turn into a spline. I then want to determine how closely the original polyline and spline follow each other. How I can check this programmatically? The concern is to find the maximum deviation and its location.
Howto be able to run the check on other types of objects as well: arc, polylines etc.
I need to fillet part on an edge on the top face of the enclosed part, is this possible? I have tried a few things but the fillet command always selects all the edges on the face to fillet.
once selected it says in the selection box that 15 edges are selected, and I can't ctrl click to remove any of them singly, basically it will deselect them all? I have made sure I have loop select off.
I'm trying to find the ComponentOccurrence in an assembly from a selected edge or face of a Part
Snipset of the
Dim oPartCompDef As Inventor.PartComponentDefinition = oFace.Parent.ComponentDefinition
'or oEdge.Parent.ComponentDefinition
Dim oDoc As Inventor.Document = oPartCompDef.Document
Dim oOcc As Inventor.ComponentOccurrence = ..........?
This has happened since I updated to 2012 Professional. When I want to use the measure tool or add constrains in assembly mode, the face/edge preview does not show up in red under Select Component Priority. I have to wait for the select other option to come up to see which face I am on. If I click on the face or edge it will show up but not until I do. I don't remember changing any settings that would cause this. I could have the select other option delay set to zero or I could change it to another selection priority but I don't remember having to do that before.
View 2 Replies View RelatedAm I missing something or is there no way to control array action spacing with formulas or user parameters?
View 3 Replies View RelatedI have come across about a dozen similar discussions, but most have presented solutions that worked in earlier versions of Edge and no longer work.
I am trying to use Edge to build animations that can then be integrated into larger non-Edge projects. I would like to then be able to control the Edge timeline or Edge symbols from elements OUTSIDE of Edge, such as another link or button in the page.
I cannot seem to figure out how to properly reference the Edge stage or symbols.
I have come across several proposed solutions for referencing Edge stage, such as:
var comp = AdobeEdge.getComposition("EDGE-966604542");
var stage = comp.getStage();
var comp = $.Edge.getComposition("EDGE-966604542");
var stage = comp.getStage();
var comp = Edge.getComposition("EDGE-966604542");
var stage = comp.getStage();
and these either DO NOTHING or throw errors about either AdobeEdge or Edge or comp being undefined.
What is going on with Lightroom 5? I upgraded from 4 and now it doesn't export with a maximum long edge of 2166 pixels even though that is what it is being told to do.
View 3 Replies View RelatedWhat is the maximum number of elements I can have in the timeline? I believe I have about 92 elements now and when trying to add another element it shows up at the top of the elements panel, but isn't showing up at all in the timeline?
I have tried converting some elements to symbols or grouping elements but still the new element I've added to the stage is not showing up in the timeline. I am not EVEN done adding more elements.
There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
All I need to do is merge a circular face to a flat face, so both faces become one continuous face. Is this possible at all?
I have a attached a screenshot to show what I mean. Face 1 needs to be merged with face 2. This is so if I constrain anything to that face it will constrain to the entire face and not either the circular face OR the flat face.
I want to union all the members in a complex roof truss structure so I can 3D print the model (picture attached). It seems intermittent in which elements will union and which wont. Revisiting the elements they sometimes then union. Sometimes there is no error message while sometimes 'Inconsistent Edge Face Relationship'
View 9 Replies View Relatedtest.jpg
Make a circle. With text tool click on vector and type anything.
How can I increase the default text distance from the edge of an object? I need text a bit away from circle border.
I have a generic 5" thick rectangular concrete roof layout with a single directional slope of 1:3.
Is there a way to have the bottom and upper edge-faces be square (Two Cut - Square) to the slope and not vertical (Two Cut - Plumb) ?
No facia applied to this roofing system. Just plane jane.
How I can check if an object is within a polygon face on the y axis?
On another note, would it be possible to get a world coordinates of the U or V vectors of a vertex? I had been trying to calculate it from two vertices that has around the same V values, but in some cases they don’t exist.
how could i control audio in edge animate
View 4 Replies View RelatedI'm performing a static stress analysis on a benchframe. The benchframe is imported out of a STP file and I assume that's where the problems begin.
When I start the simulation, everything goes well. When I see the results, almost the whole part is blue, and only a really small part in a corner is shown red, with extremely high stresses.
The corner is actually not what I wanted to test, but it is messing up the other visible results because now I have to place probes all over the part to see the stresses (because the colors are calibrated with the high peak).
I have tried working with local mesh control and convergences, but I can't control the results in the small corner. I also tried rebuilding surfaces and adding fillets.
Is it possible to set a maximum stress, so that the other colors are visible in the important areas. It is not possible to exclude the corner from the simulation because it's part of a substantial part.
I am currently working with frame generator, and I have created a structure family of extruded aluminum profiles. I have a problem, and it's like to limit the length of the profiles up to 6 meters. When I insert the profile in a structure of 7 meters of length, Inventor should segment the profile in a profile of 6 meters + 1 profile 1 meter, as the maximum length of the profile should be 6 meters.
View 1 Replies View RelatedIs there any way of displaying the geodetic distance(ie "mapdist") with the dimension tool instead of the normal distance?
View 2 Replies View RelatedI've been experimenting with different ways to control the appearance of my symbols and elements.
I've seen multiple examples where people would add custom styles to the head of the html document created by edge. I've tried this, but no matter how I tweak it, I can't seem to get it to work. I've tried adding it to the existing edge runtime <style> tag, creating my own <style> tag (both before and after the edge runtime) and then adding the CSS into that, but to no avail. I have tried adding the class to both symbols and elements on the stage using both jQuery and that class form field next to the element name. I've also made sure to close out of the project before I add my styles, just in case that was the problem.
I feel like there might be some edge animate terminology/notation thing that I'm missing, because it seems like it should be a pretty straightforward process.
I am wondering how I could control multiple symbols using classes.
So lets say I have 10 symbols on the Stage - each symbol has a class of 'box'
Using this:
sym.getSymbol('.box').play('lower');
only the first box will animate, not the other 9.
I have a composition which has two pieces of VO. Each has an associated text block.I want to play the first VO when the first text is clicked. Then, when the VO ends, I want the first text block to fade out, the second to fade in and play the second VO when tapped.
I have the timeline set up with labels to play through the transitions at the end of the first VO. No issues there.I have the audio playing when I click on the text blocks. All good.However, I do not know how to make the timeline wait for the audio clip to end before playing.This is the code for the first text block:
sym.$("RUP01_Nar_1")[0].play();
sym.play('Nar2');
This plays the audio but also plays the timeline instantly (so the text blocks fade from one to the other as soon as the audio starts).
I figure I need some sort of code in between which says, essentially, 'wait until the audio finishes then [play timeline]'. But as much i have searched I cannot find anything to do that.
I am trying to move a symbol around based on it's x and y coordinates, without using keyframes to actually animate any movement.
Basically what I want to do is have a largish map image inside a symbol, most of which is off stage, with right,left, up and down buttons that slide the map in and out as you mouseover them, thus allowing the user to navigate east, west, north and south, if you see what I mean.
The buttons would move the map symbol around in increments of perhaps 10 or 20 pixels at a time, but it would freeze where it was when you moused out of the button, and begin moving again when you mouseover.
Of course it would be important to fix limits to how far the map symbol could be pushed so that you could only see as far as the edges of the map, and not beyond the limits of the map.
i have a character, i want to control the animation to use left arrow key and right arrow key.
When i press left arrow key the character run animation call. When i press right arrow key character back run animation call. when user don't press any key the character stop animation call.
I've placed my Edge animation in an iFrame.I would like to be able to trigger the animations in the Edge file, by clicking on links in the parent document.
View 3 Replies View Relatedif it's possible to control a html5 video in Edge ?For example, I added a html5 video with the video tag and I want the video to play and stop after 20 seconds. Then, plays some animation on my edge timeline. I suppose the video must be controlled with Javascript ?
View 4 Replies View RelatedI'm trying to use ".createChildSymbol" to bring my symbols from the library to my stage. And in each symbol I have an OUT label, so every time a new symbol is called by a particular button, the last one plays from OUT label and new one appears at the same place. It's all easy for two symbols and I do not need to set any vaiable for them. But I have almost 180 symbols, and a menu of buttons to call them, so every button needs to play the OUT label of the current symbol and also plays the new one and make it as the current one.
sym.test = sym.createChildSymbol("test", "Stage");
sym.getComposition().getStage().setVariable("current", "test");
var current = sym.getComposition().getStage().setVariable("current");
sym.current.getSymbolElement().css({position:'absolute', display:'inline-block', top:167, left:91});
I have some very serious problems when i am working in a big part with maximum features.
I get a message saying that:
The application has used up the maximum allowable disk space (1200 MB)
The second problem is:
The space in C: keeps increasing. I dont know how the space in C: increased even after having the ipt file in D:
I have created an animation with Adobe Edge. My site uses Concrete5 and I am pulling in the Edge content into an IFRAME on my home page. I want the animation to play from the start when someone first visits the site, but if during their browser session they navigate back to the home page, I want the animation to only play a shorter segment of frames near the end.
My question is, how do I use cookies to acheive this? I'm new to javascript/jquery.
I've included the following code on compositionReady, (found in another post on this forum) but don't have a clue how to continue...
// insert code to be run when the composition is fully loaded here yepnope( { nope:[ '/js/jquery.cookie.js' ], complete: init } ); function init() { //create your cookie's initial values here } My temp site is here -[URL]
On revisting the homepage, I only want to play from when the green button drops in.