I have some very serious problems when i am working in a big part with maximum features.
I get a message saying that:
The application has used up the maximum allowable disk space (1200 MB)
The second problem is:
The space in C: keeps increasing. I dont know how the space in C: increased even after having the ipt file in D:
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
I have trouble to find the maximum work space for A4 paper size when I want 1:1 measurements on A4 paper. The stuff I draw must keep the 1:1 measurements
I want to go maximum .
GOAL - Upload drawing file to space management application.
Client providS me with a furniture plan and then a base plan to xreference it in.
I am getting a message box that reads: "Unreconciled New Layers"
WHAT DOES THIS MEAN AND WHAT DO I NEED TO DO?
Client creates a layer state in the furniture plan to show only what the client needs to see once the drawing is in the space management application.
DOES BRINGING IN THE BASE PLAN AS AN XREF AFFECT THIS LAYER STATE?
HOW DO I KNOW WHAT PATH TYPE TO CHOOSE (FULL, RELATIVE or NO) WHEN I GO TO INSERT THE XTREF?
WHAT IS THE DIFFERECEN BETWEEN ATTACH and OVERLAY?
I have the PhotoDelux home edition that came installed on my computer (using Windows XP). Now I can not open any more pictures with the program because it is telling me that the scratch disk is full. I have tried for hours to find an explanation somewhere on how to make space on the scratch disk, but the little bit that I found is over my head. I guess I know less about computers than I thought....
View 8 Replies View RelatedSince updating to LR4.2 and moving files around my backup files have grown too much, like 40GB over the last week. If I should uninstalled LR4.2 then re-installed, how do I locate those backup files (perhaps hidden!) before re-installing ?
View 3 Replies View RelatedI have Lightroom v. 4.1. In the process to update to v. 4.2, I receive a message that disk space is insufficient. There is over 500 GB on the hard drive. The update is halted at this time. I am using a Mac, OS Lion.
View 1 Replies View RelatedI have Adobe Bridge CS4 for the Mac. It keeps telling me that I have not enough disk space at the cache location. What do I do?
View 1 Replies View RelatedI'm using PSE/PE 11 with latest updates, Win7 64bit (again, latest updates). I7 cpu w/8GB ram.
When I attempt a backup of the catalog (EVEN after optimizing & reconnecting) to an internal HDD (SSD) with 188GB free - NO LUCK. Attempt another backup to a different internal HDD with 345GB free - NO LUCK - the app says I must free up some disk space/not enough space. My catalog size from System Info shows 21.6MB but within the Backup app of Organizer, it says it is trying to backup 612,678.10MB.
Lightroom 4.3 today started popping up random 'critically low on disk space' errors for the drive housing the catalog file.The drive in question has over 500GB free. There are no errors in Windows logs showing that OS is throwing these errors.
View 12 Replies View RelatedI have a relatively large photo catalog (200k photos +) that I am in the process of paring down with Lightroom 5. Along the way I have kept certain groups of photos published to Flickr using Smart Photosets so that if I eliminate a duplicate photo from the catalog I will be able to "re-publish" and eliminate that duplicate from the published collection.
My Catalog Files, My Backups, and the actual image files that are referenced in the catalog are all located on an external drive. I did this so that I could have everything on one drive for the time being while I eliminate a ton of photos from the catalog.
The issue that I am running into is that while a collection is being published to Flickr I get a message popping up telling me that I am low on disk space on my local (C) drive and that I need to free up some space. This is odd because everything is located on the external drive (catalog and image files) and I am publishing to Flickr.
I am just trying to figure out if there is a default somewhere that is causing Lightroom to create new thumbnails or previews somewhere on my C drive while I am publishing images to Flickr or something like that. What sort of data might be accumulating in the process here? And is there anyway to move it all or eliminate it for the time being while I am finishing the elimination of duplicate files from my catalog?
Here's what I have:
250 GB Internal Hard-Disk (with Lightroom catalog on it)
60 GB Internal SSD-Disk (with Mac OS X Lion 10.7 on it)
2 TB External Hard-Disk (place where I try make my backup to)
There is only appox. 6 GB free space on system disk (SSD). When I start to make catalog backup to External 2 TB disk, it makes it long time (copying files to External disk), then after a while Lightroom starts to "Optimizing catalog". And during this optimizing, Lightroom starts to eat disk space on the system disk (SSD). More and more, and then finally it show me the message "Lightroom was unable to back up the catalog named "XXXXX". Please check your folder permissions, and make sure that you have available space on your backup drive and main catalog's drive."
The problem is that I actually HAVE free space on 250 GB disk (where catalog is located) and on External 2 TB (where is backup destination).Lightroom says NOTHING about the fact that he needs lots of free space on SYSTEM disk. But it actually eats it.And what I want to ask, whether it is possible to make Lightroom use space on another disk, not on system?
I'm using Elements 6 on a 10 year old iMac. Great results until recently receiving message stating "Scratch disk (or startup disk) is full. Remove files to make more room. I get that and manual and iMac
View 10 Replies View RelatedWhen I look the properties of C: it shows 195 GB space available?
View 2 Replies View RelatedI have calculated some test renders on a small portion of the timeline in order to check things up. Now I would like to delete them and calculate everything at a later time.
Do you know the way to delete renders in order to save hard disk space ? I have tried the "force purge" function, but it didn't delete anything, the "Autodesk media storage" folder is still the same size...
And manually deleting renders in the "Autodesk media storage" folder messes everything up.
I have PSE 10 on my MAC. I normally download my photos onto iPhoto (and a while ago, onto Bridge CS3 which came with an earlier version of PSE) but more recently have become interested in using the PSE Organizer for my photo library. I have started to transfer/copy the photos from iPhoto but, having read various topics on organizing photos, am a little worried that by having the photos in 2/3 places on the MAC I will use much more hard-disk space. I know that the original files for iPhoto are in the 'Library' so that I just see thumbnails on iPhoto ( I may be wrong here?), but will the photos I now have on Organizer be working off those same 'Library' originals or am I doubling up on the space required to store these photos?
View 12 Replies View RelatedWhen doing catalog backup get message " your system is low on disk space, and elements organizer cannot perform the operation. If create a catalog with 20 pictures backup works OK. backing up to a 1TB external drive. Have 16705 pictures in catalog. Total disk space for pictures is 192 MB. Why am I getting message?
View 4 Replies View RelatedI'm performing a static stress analysis on a benchframe. The benchframe is imported out of a STP file and I assume that's where the problems begin.
When I start the simulation, everything goes well. When I see the results, almost the whole part is blue, and only a really small part in a corner is shown red, with extremely high stresses.
The corner is actually not what I wanted to test, but it is messing up the other visible results because now I have to place probes all over the part to see the stresses (because the colors are calibrated with the high peak).
I have tried working with local mesh control and convergences, but I can't control the results in the small corner. I also tried rebuilding surfaces and adding fillets.
Is it possible to set a maximum stress, so that the other colors are visible in the important areas. It is not possible to exclude the corner from the simulation because it's part of a substantial part.
I am currently working with frame generator, and I have created a structure family of extruded aluminum profiles. I have a problem, and it's like to limit the length of the profiles up to 6 meters. When I insert the profile in a structure of 7 meters of length, Inventor should segment the profile in a profile of 6 meters + 1 profile 1 meter, as the maximum length of the profile should be 6 meters.
View 1 Replies View RelatedCan I control the Maximum Gap Distance and Face/Edge Distance in the Corner Seam by iLogic.
I want to change between those two in different styles.
Something like this?
If currentStyle = "Kemi_0.6" Then
Face/Edge Distance = treu
If currentStyle = "Kemi_0.6" Then
Parameter("overlap") = 0.8 ul
see also my topic:[URL]
I am trying to get the desktop path in an application I made to modify and save the parts list of an IDW. I find this code all over the interent and it looks exactly like what I need:
Path = My.computerComputer.FileSystem.SpecialDirectories.Desktop
However when I try to use it it's like the "My" system object isn't there. I'm quite sure it has somethign to do with VBA instead of the normal VB. How can I accomplish getting the current user's desktop path with inventor VBA?
When I click Application Options it opens up, but the window doesn't show up, eveything else in the program gets disabled and I am able to hit Esc to get out of it.
View 2 Replies View RelatedI am making an Inventor Solid Model of a small model engine I hope to build.
how to constrain the cam shaft cams to the valve lifters.
I'd like to format the memory stick that Inventor was shipped on. (Don't need it anymore) But when I tried to format the stick I got a error "The disk is write protected". Is it not possible to format the disk? I rather reuse it than throw it in the thrash..
View 9 Replies View RelatedI'm just setting myself up on a new PC, and updating a few things along the way. I've gone from VS2005 to VS2010 express, and migrated my projects along the way. The migrated projects worked OK, but I've just started a new project and I can't figure out how to add a start up application for my project.
On the Debug tab in Project Properties, there's no option for startup application like there was in VS2005
Inventor CAD Administrator || Autodesk Inventor 2012 Certified Professional
Autodesk AutoCAD 2012 Certified Professional|| Bachelor of Technology (Mechanical)
I am new to iLogic and trying to access the "Application Options" under the "Tools" tab. I am trying to grab some information from a couple of fields but it seems that I don't have the right coding or Snippets that indicate how I would do so.
View 3 Replies View Relatedadding a button to "Export" tab of Application Menu of Inventor. I am using Vc++.
The information that i found is from UserInterfaceManager i could get CommandControls and add a button/ Seperator here. Need to add this inside the "Export" tab.
I am developing a web app ASP.NET MVC 3, which will read the properties files of Inventor (dwg, idw, ipt, iam). Read the properties of these files is by using objects Apprentice Server, which provides Autodesk Inventor View 2012. Connection objects is done through the library RxApprentice.tlb.
Code is shown below:
public ActionResult Index ()
{
try
[Code].....
While debugging applications on Web-server - IIS Express 7.5 development environment Visual Studio 2010 application runs without errors.
After publishing a Web application on IIS 7.0 the following error: "Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))».
A tried: change User Account Control Settings, and set permissions to configuration DCOM objects in Component Services - no results.
Is it possible to read the file properties Inventor of Web applications, and how to do it?
For whatever reason, everything reset back to default in my application settings. The only thing I remember happening was that at one point my Inventor was not able to establish a connection to the server where the liscence is stored and it gave out an error message. Ever since then, everything was reverted to default.
how to change the look of the highlights in the assembly environment when selecting parts? I can't remember where it's at.
Inventor 2013
Windows XP
Application option settings don't persist! They will work great for a few days and then all of a sudden Inventor will go back to the defaults.
The iLogic browser keeps disappearing as well.
Autodesk Product Design Suite 2012 (Inventor 2012 Pro SP1, Vault 2012 Pro Update 1)
Windows 7, 64-bit
Intel Core i7
8GB
Nvidia Quadro FX 3800M
I've recently installed IV 2013 on my PC and when I attempt to import my 2011 Application Options over, they do no apply.
View 2 Replies View Related