Using RMB to Copy a general table from one drawing & RMB paste to another has no result.
But using the CTRL + C & CTRL + V for the identical task works fine.
Looks like a bug. It's annoying at worst but hopefully easy for programmers to fix.
Inventor Suite 2013 Ultimate
Is there anyway to copy a table from one sheet to another?
View 8 Replies View RelatedI have gotten in the habit of using a leader text with a custom iproperty to do material call outs on my drawings. I have been doing the first one then copy/pasting the leader onto each piece i want to call out.
This worked flawlessly in 2010 and has worked well previously in 2012. For some reason it is not working at all in this particular .idw.
work flow is to create the first instance, copy. right click outside the view border and select paste. Then attach to as many different parts as needed.
attached is the error message I get.
The custom iproperty is text. 1/2 a36 or 4x4x3/8 Angle
is it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?
I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.
I have one big problem copy and paste symbols in one idw to another idw it takes to much time.it's possible through macro or ilogic for copying symbols in drawings?
View 4 Replies View RelatedOkay I've been building random things to teach myself how to use Inventor and right now I'm stuck on a rim I'm creating. My question is.. is there a way to copy and paste a lofted item since there are three parts to it (2 planes and 1 guide) because I need 4 more spokes and if I copy the loft it copies all three parts seperately. Then when I paste and orientate the small end of the loft to the plane I want it tells me "Unsatisfied Geometric Inputs".
View 4 Replies View RelatedEver since updating to the latest service pack I can no longer copy and paste leaders inside a drawing.
I used to be able to set up the leader I wanted and then copy and paste to all the parts I wanted to assign it to but I can't paste anymore.
I am using the iproperties data within the text box..
Inventor 2013
I have a one rectangular block(Control cabinet) it consists of around 100 sub rectangular blocks here problem is in my part user wants few blocks in different dimensions and different positions some time. So I created one sketch in my sketch plane then user wants more features on rectangular block then I want automatically copy and paste on same plane same sketch and same time automatically asking for dimensions(positional, length and width).
View 3 Replies View RelatedI did a sketch in an idw that is not attached to any view. I wan't to copy it somehow to another idw. But when I right click, copy and/or paste are not available for me to complete to process.
I tried creating a symbol using my already made sketch since those are easier to copy/paste between files. But I don't know how to proceed without recreating my sketch.
I have a sketch on the global ZY plane. I need a copy of the sketch on some other plane.
But when I copy the sketch and paste it to the other plane, the sketch seems to rotate.
It is pasted not the way I would like. And I see no method to rotate it into the correct position.
It's probably easy, but I do not see it.
I'd like to copy the ilogic text & keep it's colour format - what will do this?
View 1 Replies View RelatedIf you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
i'm trying to do is copy some linework in a sketch i have on autocad 2011 (i havent upgraded it yet) and paste it into a sketch i have on inventor 2013.
Copy and paste works fine with other versions of inventor or autocad, but i can't use 2013 inventor for pasting.
When i attempt to paste the linework into my 2013 inventor sketch i recieve a long hefty error message:
"String resource could not be loaded (and is missing?) for id 5239 (error 2fee34a0)"
I recently downloaded a .SAT part from 3dcontentcentral.com and i would like to use it in an assembly i am creating. Problem is, once i pulled it into Inventor, I am unable to edit the part to match the dimensions necessary for my assembly. How do i go about editing this part? Is there a way that i can copy the components of the part and paste into a new drawing, save as a normal part, then edit? I have attached a screenshop of the part so you can see the Model tree.
p.s. I would simply redraw the part, however i am having a lot of difficulty getting it to look as i want it to.
Here I attached my model view it's just for reference here iam using rectangular pattern and simple ilogic code .Using rectangular pattern we will get all same sizes of boxes but i want to change different different sizes and positions. my idea is without using pattern just draw one rectangular through parameter. Select no. of compartments automatically copy and paste that rectangular in same sketch plane and ask sizes and positions dimensions.
It's possible through ilogic?
In my panel bar options are:
Hight of panel- Hight of panel
width1- Width of panel
Depth1-Depth of panel
com1- no.of Compartments
hIN- No.of Hinges
All of a sudden I have a strange problem. I am unable to paste into adobe photoshop once I press the print screen button. I am however able to print into the likes of paint or other applications, but it seems to tbe photoshop that is affected.
If I copy a image from a website or so and paste in photoshop it works.
I would guess that it may be something to do with the internal clipboard of the application, but has anyone any ideas. I still use Photoshop 7 for what it is worth on XP.
I have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
View 5 Replies View RelatedI created a general assembly (GA) and placed several parts and assemblies. After I realized there are too many parts and assemblies in the GA to reasonably place on a drawing. Now I want to remove some parts and create sub-assemblies. Is there an easy proceedure to select some parts in the GA and insert them into a new sub-assembly and (hopefully) keep the constraints intact?
View 2 Replies View RelatedI just loaded inventor 2013 for student.I have tried to set up my key broad with some shortcut keys. When I right cick in the ribbon I do not get any way to get to optiongeneral tools.
View 4 Replies View RelatedWhen using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
One of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies View RelatedI'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View RelatedUsing inventor to calculate specific distances or counts of features on a part. Say for instance, the lineal feet of a radial edge, or the number of cutouts a part may have. If so, how are you approching this? Can be programs written with the API/iLogic or just general setup I am pretty versitle and open to any discussion.
View 6 Replies View RelatedI cannot edit a dimension that I add to a drawing, IV simply ignores my request when I select Edit from the shortcut menu. This is not a retrieved dimension. My only workaround has been to edit the dimension properties in the part file to display as I would like on the drawings.
I've checked the application options, under Drawing tab, I do have "Edit dimension when created" checked, yet IV does not display the edit dialogue box upon initial creation of the dimension.
How can I display iPart parameters in an iAssembly general table?
On my .dwg I would like to use one detail with a table. The 2 table columns I need are:
(1) iAssembly name (no problems here, shows up in the general table by default)
(2) Length (this parameter value is in the iPart)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
I am not a regular user of the Inventor General Table. I can make and edit the table with no problems. I want to eliminate the lines from one of the columns while leaving the lines in the remaining columns. I tried to set up the column before inserting it but could not find the column format that would allow me to do that in the Style Editor.
How to do this. I need to also remove the (read only) from the Style Editor.
I have an IPart with about 100 instances in it that is sheet metal. I created a user parameter for the gauge of the sheet metal relating to the thickness and that works fine in the ipart. My dilema is how to get the gauge to show up in my drawing in the general table. Pretty much I woud like the table to list part number, material and then have a column for the gauge of the steel related to the thickness in the Ipart table. I am using Inventor 2011 if that makes a difference.
View 2 Replies View RelatedLT 2011- I place a JPEG of a logo on my sheet in model space. Is there any way to manipulate it as in moving it, making it a tad smaller, etc.? Am I able to copy and paste it
View 1 Replies View RelatedUsing copy and paste to add symbols to a layer, after a point the symbols will no longer paste.
View 3 Replies View RelatedI have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 Replies View Related
