Quite often I need to measure shortest surface distance between two points (electrical tracking diatance) as in pic below. I can do it iteratively by taking a range of slices out of the part (2nd pic) and measuring the cut edge length but it's quite meticulous and time consuming.
.ipt attached.
I am trying to create a 3D meshed surface from an irregular shaped solid I created using firstly a SPLINE, FILLET, PEDIT, and EXTRUDE. I have a solid in the basic shape now, but I am trying to create a meshed top and bottom (x, y, z,) to change the contours of those surfaces. I have looked at 3DMesh but it asks for (n,M,) coordinates like it is a regular shaped surface (square, rectangle) where one can calculate the required even spacing needed.
My goal is to create in CAD something like a fine art carved piece of wood, with irregular shaping and no straight planes or surfaces.
I have included a basic picture in JPEG format for your review. This is the item from which I am trying in ACAD 2010 to construct into a usable adjustable form so I may parametric for my needs.
I have a fairly complex irregular surface model that originally came from Microstation. I have it as sat version 7 and dwg. My goal is to import it to Revit (Building design suite 2013, so I have architecture/structure/systems available) and use the surface to cut a regular wall that was created in Revit.
When I insert the surface, it comes in as an Import Symbol. I understand that I will need to change it to a cuttable family type, but do not know how. Also, I am unsure if I can use a surface to cut, or whether it needs to be a solid instead?
I was also trying to extrude a void ending to one side of the surface in order for it to cut any solid objects (such as walls) that appear on that side in the project, but was unable to accomplish this.
I was asked to lable survey data with the (2D) distance between the design surface and the survey points of the finished ground.
View 9 Replies View RelatedWhen we created our fist C3D template in 2007 it was possible to make a grading criteria that targeted a surface at a fixed distance. In other words, the slope was variable. Looking at it again in 2013 it appears it's not possible to creat a criteria like that. Am I missing something? Or was that option removed? .....perhaps because it was too unstable?
View 9 Replies View RelatedI am trying to create a spheric container with a irregular pattern of different triangle as show in the example attached.
What would be the best way to creat this part? i was thinking of creating each triangle in a different .ipt and after assemble them all toghter. But this will take ages and a lot of ipt.
How can I create the irregular shape?
View 3 Replies View RelatedI remember using a tool/option to align few lines from longest to shortest.I can't remember where this optin is.
View 5 Replies View RelatedMany times I see that these types of irregular shapes which comprise of spline curve are created with very less or no dimensions, so I want to know how this spline curve was created and can be controlled, if I want to create it in an exact manner what dimension I should use ?
View 2 Replies View RelatedIs there any way of displaying the geodetic distance(ie "mapdist") with the dimension tool instead of the normal distance?
View 2 Replies View RelatedI am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
[URL].....
how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedI am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Is there a way of dimensioning the distance between the views on a .idw?
I have a series of drawings to make, that consist of two view each. I need to make them as consistant as possible, as far as the distance from view to view, accross the drawings.
What formula or dimensions do i require so as there is a 0.5mm gap around the Revolution 3 (red color)...is revolution the method required to achieve this?
View 2 Replies View RelatedUsing Inventor Professional 2013
In the attached assembly, I would like to fill the four corners (see Figure 1) with weld to make one smooth bead around the perimeter of the end cap rather than using fillet weld to lay down four linear beads along the edges. I accomplished this with a groove weld (see Figure 2). However, problems occurred (pasted below) when I attempt to weld this piece to a surface.
Error message:
" Create Weld Feature: problems encountered while executing this command.
example.iam: Errors occurred during update
Fillet Weld 3: Could not build this Fillet Weld feature
The attempted operation had problems trimming and discarding faces. Try with different inputs."
When I had the four original fillet weld beads, I could fillet weld this part to a surface no problem (see Figure 3). When I switched it to a groove weld to get the desired corner appearance, I get errors. I tried to mess around with the tick boxes in the groove weld dialog box to try to fix the problem but nothing worked.
Ultimately, my problem can be solved if I could simply fill the corner gaps without using the groove weld command. This would eliminate the errors associated with fillet welding over groove welds.
Let me know if the attached files do not work. This is my first time uploading an assembly and its associated part files.
Figure 1: Corner with fillet welds (need to fill that gap)
Figure 2: Corner with groove weld (gap filled)
Figure 3: Fillet welded (concave) to plate. Still need those corners filled.
Code to find minimum distance between two faces using "Minimum distance" method...
View 5 Replies View RelatedI have a VBA form coded that we use to generate part numbers and descriptions that then populate the iProperties. We often use the part sizes in the description. I would like to be able to put a button on the form that allows users to use the "Measure Distance" tool so that they can measure the part while they are creating the description.
Any code that I could use to activate the "measure" tool while a vba form is active?
There is an API AddTwoPointDistance() to add the distane(horizontal, vertical or aligned) between two sketch points.
But I want to add perpendicular distance constraint between a sketch point and a sketch line
I noticed that when "distance effect" is selected in viewing preferences, the paper color of .idw files changes. I think it's not good, is it?
View 9 Replies View RelatedWhen using the rectangular tool how do i calculate equal distances between each Fin.The picture shows 11 Fins but they are not equal distances between each Fin which causes the Fins to be higher on the right side.Which formula / calculation do i need to use in Rectangle Tool to produce equal distances between each fin and therefore the 1st and 11th fin are in the same position on each side of the cylinder.Using Inventor 2012
View 9 Replies View RelatedHow to keep a section view of an iam active when accessing the distance tool? As soon as I click on the distance tool, the half-section disappears. This makes it difficult to measure relationships from one component to another. I am using Inventor 2013 which was recently installed on our workstations.
View 3 Replies View RelatedI want to create an i part which derives its length and width from pairs of snapped points in the assembly. These can be any two points not necessarily existing properties of any part.
My new part would then calculate its actual dims from these measurements. Can this be done in ilogic and how?
I'm just playing with a rotor head of a model helicopter (see picture). For proper initial alignment, all main parts shall be setup parallel against one-another. This can be done by aligning the length of the ball linkages.
But therefore I need to know the distance of the ball centers. How can I do that? (STEP file for testing with different Inventor versions is attached).
I want to measure the minimum distance between 2 parts. But I want Ilogic to know what parts to measure according to what i've selected.
I have something like this but its not working... gives me always this error "
Measure.MinimumDistance: No entity named "System.__ComObject" was found."
Dim oOccurrence As ComponentOccurrenceDim oOccurrence2 As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)oOccurrence2 = ThisDoc.Document.SelectSet.Item(2)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic") ReturnEnd Try Dim doc As DocumentDim CurFileName As String oOccurrence = ThisApplication.ActiveDocument.SelectSet.Item(1) oOccurrence2 = ThisApplication.ActiveDocument.SelectSet.Item(2) distance = Measure.MinimumDistance(oOccurrence,oOccurrence2)MsgBox(distance)
We have many old sheet metal parts that are designed in Autocad environment and of course they are in 2D .dwg format. Sometimes it's necessary to get those parts in Inventor and "convert" them to 3D, but sometimes Inventor's "Fold" function isn't working like it suppose to work.
So all I'm trying to do is that first I'll import the flat pattern .dwg file to sketch,
then define the thickness of a part and lastly trying to bend the part with "Fold" function. Sounds easy, but it isn't always.
Especially sometimes Inventor wants to fold whole flange although there is a relief cut drawn. There is a one example in attachment when it happens. So is it possible to define the folding distance like in "Flange" function?
I'm using Inventor 2013 and would like to create a dialog box requesting the parameters for a simple rectangle and be able to snap in an assembly to get the distance for each parameter (width and depth) of the shape. Is this possible with either VBA or iLogic? I just need how to get the value...I can handle the dialog box.
View 5 Replies View RelatedI would like to measure the distance in assembly.
The distance is between two hole axis.
I use Measure Distance tool.
I do not have the “Select Other” option to choose axis supposedly pop up ofter the preset delay time. Seems like Application Option – General – Selection is responsible for that?
But it is checked to ON as on pic attached. My laptop machine works fine with the same settings.