AutoCAD Inventor :: Calculating Distance Using Rectangle Pattern?
Apr 16, 2012
When using the rectangular tool how do i calculate equal distances between each Fin.The picture shows 11 Fins but they are not equal distances between each Fin which causes the Fins to be higher on the right side.Which formula / calculation do i need to use in Rectangle Tool to produce equal distances between each fin and therefore the 1st and 11th fin are in the same position on each side of the cylinder.Using Inventor 2012
View 9 Replies
ADVERTISEMENT
Dec 7, 2012
Inventor 2013 part file attached.
I am trying to get the rectangle pattern to form 8 blades of the same shape and height across the barrel.A picture shows how the height is lost within the barrel..The only blade which is the same height is the 2 outside blades
Is the rectangle the right tool to produce the result?
View 5 Replies
View Related
Jun 11, 2012
Here goes= If i have a rectangle that is 27.125 X 27.5 and i want to chamfer a corner, but i also have a set distance(or the hypotenuse) Which is 22. How can i get it to put that angle in there with out trial & error of drawing a 22" long line on a 45 degree angle and moving it till it fits properly, then trimming off the corners... I have tried all the different commands in chamfer, the best i can do is guess at the distance,which is a crap shoot to me.
View 9 Replies
View Related
Apr 11, 2012
I want to know if it is possible to calculate the water displacement volume of an assembly if it were immersed in water.
In other words, I want to create a file in which ALL hollow spaces inside structural members, valves, pipework etc are assumed to be solid so that when that assembly is dropped in water, the total volume of water being displaced will be equal to the iProperty value for volume. I know its possible to hole patch when creating a shrinkwrap, but this is only effective for 'circular' hollow spaces and does not fill obscure or rectangular shaped empty volumes.
View 8 Replies
View Related
Nov 14, 2012
I would like to find the actual weight of a part in pounds.
I have attached one of the parts I would like to know the total pounds or ounces for. I’m using a specific material that I set in the Physical tab of iProperties.
Version = Inventor Pro 2009
View 4 Replies
View Related
Jan 16, 2013
Make a current, parent image, pattern step and repeat at an exact distance from the parent.
I have a parent image 4.75"long X 2.00" high image I want the pattern repeated in the Y direction every 2.10" or with a .10" space between the images, to create a 1XN array or tiles or pattern?
I then want to print the new tiled, array image to the exact size.
View 2 Replies
View Related
Sep 12, 2009
I want to calculate aurface area of iparts automatically. there are about 100 ipatrs and i want to find surface area of each ipart. is there any way that i just click the desired surface and its area is written in some file so that i can just go to the next ipart click the desired surface and its area is written automatically on some file.
Is there some option in inventor to define macro for it coz i hav no knowledge of defining macros.
View 9 Replies
View Related
Sep 2, 2013
ilogic is calculating tan/sin/cos/aTan/aCos/aSin incorrectly. E.g.
MessageBox.Show(Atan(35))
Answer = 0.4738... when it should be 0.7002....
View 5 Replies
View Related
Mar 26, 2012
Is there a function in Inventor 2012 for Inventor to quickly calculate the combined length of a collection of extruded parts?
What I want is to multiple select a series of extruded lengths in the browser, hit a button and see a total length.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 7 Replies
View Related
May 25, 2012
where could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies
View Related
Mar 27, 2012
How can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
View 9 Replies
View Related
Jul 25, 2012
As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
View 7 Replies
View Related
Jun 29, 2013
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies
View Related
May 31, 2013
Is it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies
View Related
Oct 12, 2011
Using Autocad 2000 LT and would like to know the best way to draw a 1/4" dia circle pattern. The circles centers to be 3/4" in from the edge and equal distance apart ( as close to 1" as possible) on all four sides of an 8" x 12" rectangle. Have tried a rectangular array and can't seem to get it to work properly.
View 2 Replies
View Related
Jul 31, 2012
I am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
View 4 Replies
View Related
Nov 20, 2013
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies
View Related
Mar 17, 2009
Is there any way of displaying the geodetic distance(ie "mapdist") with the dimension tool instead of the normal distance?
View 2 Replies
View Related
Jul 30, 2012
I am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
[URL].....
View 9 Replies
View Related
Mar 16, 2013
I have a question about calculating the maximum tube length. Why do i ask this, because you can just measure it on drawing?
I'm building a parametric model for building simple storage tanks, and the goal is to get a complete BOM out of the model without any difficulties.
I have 4 possibilities of tube positioning on the tank. (see image)
1. A tube that stands in the center of the axis of the main tank.
2. A tube that stands in the center of the axis of the main tank, but under an angle
3. A tube that doesn't stand in the center of the axis of the main tank.
4. A tube that doesn't stand in the center of the axis of the main tank, but under an angle
These 4 possibilities can be flush with the inside of the tank or not.
Is there a easy way to determinate the longest point from the front of the tube? This longest measurement will be the length i need to get into my description for the BOM.
View 1 Replies
View Related
Oct 6, 2011
Is there a way of dimensioning the distance between the views on a .idw?
I have a series of drawings to make, that consist of two view each. I need to make them as consistant as possible, as far as the distance from view to view, accross the drawings.
View 3 Replies
View Related
Dec 26, 2013
What formula or dimensions do i require so as there is a 0.5mm gap around the Revolution 3 (red color)...is revolution the method required to achieve this?
View 2 Replies
View Related
Apr 1, 2008
Code to find minimum distance between two faces using "Minimum distance" method...
View 5 Replies
View Related
Nov 8, 2012
I have a VBA form coded that we use to generate part numbers and descriptions that then populate the iProperties. We often use the part sizes in the description. I would like to be able to put a button on the form that allows users to use the "Measure Distance" tool so that they can measure the part while they are creating the description.
Any code that I could use to activate the "measure" tool while a vba form is active?
View 8 Replies
View Related
Oct 16, 2013
There is an API AddTwoPointDistance() to add the distane(horizontal, vertical or aligned) between two sketch points.
But I want to add perpendicular distance constraint between a sketch point and a sketch line
View 1 Replies
View Related
May 10, 2005
I noticed that when "distance effect" is selected in viewing preferences, the paper color of .idw files changes. I think it's not good, is it?
View 9 Replies
View Related
Sep 18, 2012
How to keep a section view of an iam active when accessing the distance tool? As soon as I click on the distance tool, the half-section disappears. This makes it difficult to measure relationships from one component to another. I am using Inventor 2013 which was recently installed on our workstations.
View 3 Replies
View Related
Nov 30, 2012
I want to create an i part which derives its length and width from pairs of snapped points in the assembly. These can be any two points not necessarily existing properties of any part.
My new part would then calculate its actual dims from these measurements. Can this be done in ilogic and how?
View 1 Replies
View Related
Jun 21, 2012
I'm just playing with a rotor head of a model helicopter (see picture). For proper initial alignment, all main parts shall be setup parallel against one-another. This can be done by aligning the length of the ball linkages.
But therefore I need to know the distance of the ball centers. How can I do that? (STEP file for testing with different Inventor versions is attached).
View 3 Replies
View Related
Jul 11, 2013
I want to measure the minimum distance between 2 parts. But I want Ilogic to know what parts to measure according to what i've selected.
I have something like this but its not working... gives me always this error "
Measure.MinimumDistance: No entity named "System.__ComObject" was found."
Dim oOccurrence As ComponentOccurrenceDim oOccurrence2 As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)oOccurrence2 = ThisDoc.Document.SelectSet.Item(2)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic") ReturnEnd Try Dim doc As DocumentDim CurFileName As String oOccurrence = ThisApplication.ActiveDocument.SelectSet.Item(1) oOccurrence2 = ThisApplication.ActiveDocument.SelectSet.Item(2) distance = Measure.MinimumDistance(oOccurrence,oOccurrence2)MsgBox(distance)
View 1 Replies
View Related
Nov 19, 2012
Quite often I need to measure shortest surface distance between two points (electrical tracking diatance) as in pic below. I can do it iteratively by taking a range of slices out of the part (2nd pic) and measuring the cut edge length but it's quite meticulous and time consuming.
.ipt attached.
View 9 Replies
View Related
