Inventor 2013 part file attached.
I am trying to get the rectangle pattern to form 8 blades of the same shape and height across the barrel.A picture shows how the height is lost within the barrel..The only blade which is the same height is the 2 outside blades
Is the rectangle the right tool to produce the result?
When using the rectangular tool how do i calculate equal distances between each Fin.The picture shows 11 Fins but they are not equal distances between each Fin which causes the Fins to be higher on the right side.Which formula / calculation do i need to use in Rectangle Tool to produce equal distances between each fin and therefore the 1st and 11th fin are in the same position on each side of the cylinder.Using Inventor 2012
View 9 Replies View RelatedHow are complex shapes created in Inventor.I have started a propeller but at this point am only able to do the hub. How to create the propeller blades. Is this modelling for this shape done with surface modelling or can it be created with solid modelling technique?
View 8 Replies View RelatedI am trying to do this tutorial: [URL]....... but I have a trouble at Step 3 : Creating Web Header - rather: Now go to the " Shape Tool ", double click on the bottom middle line to create a custom node / corners.
View 7 Replies View RelatedI can't open the other shape options form the rectangle tool?
View 1 Replies View RelatedI am working on a form (global) and have added a picture with a parameter and a picture folder underneath. So that the picture displayed on my form will change depending on the parameter value.Here comes the trick. Only text parameters can be used!On the form editor only 'Text parameter' can be selected to drive the picture selection. I actually need an integer, so that i can use my User/Excel parameters from Inventor.
I can work this around with an iLogic rule to equal the value of my string Picture Parameter with the relevant integer Inventor parameter, but the rules need to be run before the pic and the form updates (by pressing the 'Apply' button at the bottom of the form and then the assy updates too. So this takes a couple of minutes)... whereas if it was an option on the form editor then the update would be instant without waiting for everything to update...
Is there a particular reason why the Picture Parameter only can be a text parameter?
where could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedIs it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedI am working on making a jet engine. Best way to make jet engine fan blades? so many curves in different directions. I have tried to make contour with polyline, but no luck getting a surface.
View 5 Replies View RelatedUsing Autocad 2000 LT and would like to know the best way to draw a 1/4" dia circle pattern. The circles centers to be 3/4" in from the edge and equal distance apart ( as close to 1" as possible) on all four sides of an 8" x 12" rectangle. Have tried a rectangular array and can't seem to get it to work properly.
View 2 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedI am looking for ways to draw the rolling of blades or slats around an axe for Aluminum Roller Shutters. The path of the rolling is an hellix, rolling around a 70 mm octogonal reel then continue downward in a downward movement.
I have attached some pics from Catalogues and Guides where such have been drawn.
I have tried a few things and can't get mine to look like these.
View 5 Replies View RelatedIs there a way to get columns in form? I would like to put
Hole F Type { List the types} Hole F Location {input box}
Hole N Type { List the types} Hole N Location {input box}
Hole G Type { List the types} Hole G Location {input box}
If not this form will be off the monitor.
I'm trying to enter a model parameter value with a VBA form, but I don't know which type of control to use neither how to write the code. I want to enter a number or a value with any control and use this value for modify a model parameter.
I have a simple code with a line:
oModelParams.Item("z").Value = 25
I want to make something like:
assuming that "TextBox1.Value" is a numeric value obtained with a control at the form
oModelParams.Item("z").Value = "TextBox1.Value"
how I can get a form onto the ribbon or create a custom Icon to run it.
I have read up on afew forums that VB needs to be used in order to achive this but I want to double check.
I dont have VB but if it is the only way to get this to work I will download it.
how do i rotate a lightsaber without affecting the blades? whenever i try to rotate the hilt and the blades, they rotate separately(look at the attached file). and when i attach them together, the glow effect disappears. is there another way to do it?
View 3 Replies View RelatedOk so where are Global Forms saved in 2013?
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
I have a ipt which is controlled via an ilogic form,this form is opened by ilogic code, which in turn is triggered when the ipt is opened.
my problem is when the part is placed within an assembly the said form is triggered and the same happens when the assembly is reopened!.... I would prefer if the form opened only when the ipt is opened or edited....
Is there a snippet of code for this? Or is it even possible?
I am creating a large form. The goal of the form means I am unable to break it down into smaller forms as there is a great deal of interaction between all levels of the form.
One of my first fields is a multi-value field (Foundation Type) with four options (None, Slab, Piers, Wall). Three of those options have a group of fields lower in the form with between 1 and 5 fields.
(Multi:Value Option: Example of fields specific to that option)
Slab: Thickness, Edge Depth, Edge Width
Piers: Diameter, Depth.Offset
Wall: Footing (T/F), Depth, Width,
I currently disable all of the groups of fields that are not part of the active option in the primary multi-value field throught the (Enabling Paramter Name) option with a rule. This keeps the user from entering values that affect a Foundation Type that is not currently active, but the disabled fields take up a lot of room on my form and may confuse end user less familiar with the system,
The group function in the form has a minimize toggle next to the group name, but the Form Editor does not show any options to manipulate this toggle. Is there a way to automatically toggle this minimize/maximize function through a rule or other means)? Or are there any other means of hiding form fields that are not currently enabled?
I have the following problem:
I have created a form in which I need to see the volume value. For that I created a User Parameter that is set to be equal with part's volume:
Volume=iProperties.Volume
What I don't like is that the precision for the parameter is too long and I can't change it. I changed the precision in Document Settings and also for the parameter itself in the Parameters window, but these changed don't affect what is the form.
Why can't you show the file name on a form (without using iLogic to link it to a property)?
View 2 Replies View RelatedI have a form for adjusting center distances between several posts, up to a total of 20 posts. The number of posts is adjustable depending on how many I need. If there is 10 active posts there will be 10 suppressed post. When there are 10 suppressed post, I don`t need them in the form. Is it possible to hide the center distances I don`t need?
View 2 Replies View RelatedI´m having a bit of an issue with a form.
I have a global form which is exactly made for a specific assembly for configuration of this very assembly. To make things easier for the user I call another external rule which only opens exactly this assembly.
Now when the user opens the form the assembly is not open and obviously can´t reference the used parameters.
Even after loading the assembly the parameters are not available, which results in something like this:
So this is a really simple question, is there a way to update a form so that it rereads the parameters from the assembly?
What I tried is using iLogicForm.CloseGlobal("Name of form") to no availability and then open it again with iLogicForm.ShowGlobal("Name of form").
But I couldn´t find any further info on the iLogicForm Commands.
I have a iLogic Form which includes several Tabs. Can I control which Tab is active if I select a radio but which controls which feature is active in the part? I have attached a picture of the Form.
View 1 Replies View RelatedI am trying to put an immediate update box on my form in ilogic. I want to be able to change parameters on my form without updating the model. There is this option in the parameters window but not in the form. How can I accomplish this?
View 1 Replies View RelatedI made a model that can be adjusted by using a ilogic form.
This alters the parameters in my "master" part & then changes my part in my assembly.
Problem: the form is located in my "master" part is there a way to access the form from my assembly?
Inventor 2013