I am creating a large form. The goal of the form means I am unable to break it down into smaller forms as there is a great deal of interaction between all levels of the form.
One of my first fields is a multi-value field (Foundation Type) with four options (None, Slab, Piers, Wall). Three of those options have a group of fields lower in the form with between 1 and 5 fields.
(Multi:Value Option: Example of fields specific to that option)
I currently disable all of the groups of fields that are not part of the active option in the primary multi-value field throught the (Enabling Paramter Name) option with a rule. This keeps the user from entering values that affect a Foundation Type that is not currently active, but the disabled fields take up a lot of room on my form and may confuse end user less familiar with the system,
The group function in the form has a minimize toggle next to the group name, but the Form Editor does not show any options to manipulate this toggle. Is there a way to automatically toggle this minimize/maximize function through a rule or other means)? Or are there any other means of hiding form fields that are not currently enabled?
I am working on a form (global) and have added a picture with a parameter and a picture folder underneath. So that the picture displayed on my form will change depending on the parameter value.Here comes the trick. Only text parameters can be used!On the form editor only 'Text parameter' can be selected to drive the picture selection. I actually need an integer, so that i can use my User/Excel parameters from Inventor.
I can work this around with an iLogic rule to equal the value of my string Picture Parameter with the relevant integer Inventor parameter, but the rules need to be run before the pic and the form updates (by pressing the 'Apply' button at the bottom of the form and then the assy updates too. So this takes a couple of minutes)... whereas if it was an option on the form editor then the update would be instant without waiting for everything to update...
Is there a particular reason why the Picture Parameter only can be a text parameter?
I just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
I am working with and extension to AutoCAD Map 3D 2012 on Windows 32. When a dialog opens it sometimes immediately minimizes and must be restored via the Windows task bar. I have also noticed that the dynamic input command line is visible when the dialog disappears and is present even if the dialog does not disappear. I have shown this in the image below. This also occurs on Windows 7 64 bit, as well.
If I set the workstation to windows Basic Theme or turn off dynamic input, this does not occur.
I mostly use SAE and ANSI screws, bolts, pins and etc in my assemblies. It is tiresome to wade through the DIN, ISO, JAL and other components when looking for a particular inch bolt. Is there a way to unload the excess library listings?
Is there a way to get columns in form? I would like to put
Hole F Type { List the types} Hole F Location {input box} Hole N Type { List the types} Hole N Location {input box} Hole G Type { List the types} Hole G Location {input box}
I'm trying to enter a model parameter value with a VBA form, but I don't know which type of control to use neither how to write the code. I want to enter a number or a value with any control and use this value for modify a model parameter.
I have a simple code with a line:
oModelParams.Item("z").Value = 25
I want to make something like:
assuming that "TextBox1.Value" is a numeric value obtained with a control at the form
Is it possible to eliminate the Profile listed in the title are? I prefer to view the path in the title area. Sometimes the path can be fairly long and characters get cut off. If I could eliminate the current profile from being listed here, I could view more of the path. See attached.
I have a ipt which is controlled via an ilogic form,this form is opened by ilogic code, which in turn is triggered when the ipt is opened.
my problem is when the part is placed within an assembly the said form is triggered and the same happens when the assembly is reopened!.... I would prefer if the form opened only when the ipt is opened or edited....
Is there a snippet of code for this? Or is it even possible?
I have created a form in which I need to see the volume value. For that I created a User Parameter that is set to be equal with part's volume:
Volume=iProperties.Volume
What I don't like is that the precision for the parameter is too long and I can't change it. I changed the precision in Document Settings and also for the parameter itself in the Parameters window, but these changed don't affect what is the form.
I have a form for adjusting center distances between several posts, up to a total of 20 posts. The number of posts is adjustable depending on how many I need. If there is 10 active posts there will be 10 suppressed post. When there are 10 suppressed post, I don`t need them in the form. Is it possible to hide the center distances I don`t need?
I have a global form which is exactly made for a specific assembly for configuration of this very assembly. To make things easier for the user I call another external rule which only opens exactly this assembly.
Now when the user opens the form the assembly is not open and obviously can´t reference the used parameters.
Even after loading the assembly the parameters are not available, which results in something like this:
So this is a really simple question, is there a way to update a form so that it rereads the parameters from the assembly?
What I tried is using iLogicForm.CloseGlobal("Name of form") to no availability and then open it again with iLogicForm.ShowGlobal("Name of form").
But I couldn´t find any further info on the iLogicForm Commands.
I have a iLogic Form which includes several Tabs. Can I control which Tab is active if I select a radio but which controls which feature is active in the part? I have attached a picture of the Form.
I am trying to put an immediate update box on my form in ilogic. I want to be able to change parameters on my form without updating the model. There is this option in the parameters window but not in the form. How can I accomplish this?
I just learned (after 16 years...) that it's been possible to drill down through successive compound objects within groups without using the new V7 feature "Edit inside".
I'd always used Ctrl+Click within a group to select the object in it I want, but could never select just a group that was within--only a single object. But apparently Ctrl+Click is only intended to select the bottom-most (leaf) object of the group (tree). If instead you use Ctrl+Alt+Click, you can click through each level of a group.
So for example if you made two groups of 3 objects and then grouped the two groups together, you can select the whole group first, then one of the other groups within, then one of the objects within that group.
I can't believe I didn't know this. Shows what I know. And what amazes me more is that I didn't figure it out given that you can Alt+Click to select through overlapping objects.
One of the features I was really looking forward to in CS6 was creating fillable forms with ONE application. I created a form following the step by step instructions in classroom in a book for CS6. When I opened the exported form in Reader X, I get a "This operation is not permitted" error. I opened the completed "end" document in the lesson to make sure I didn't commit an error, and I got the same message when exporting. I have looked for places in menus to modify security restrictions and I can't find any. I installed the updates and that didn't solve the issue.
I saw one solution posted which is to open the document in Acrobat, then do a "save as" option. Is there anything we can do that doesn't involve buying additional software? If this is not the case, then Adobe seriously needs to change its training and advertising about this functionality.
I'm trying to setup a custom form that matches my company's title block information. My desired end result is to eliminate the need to open the iproperties (some users find it confusing/inconvient). I have a seperate tab for the check/status information listed in the "status" tab of the iproperties. In the iproperties, these are activated and deactivated with a check box. When I add these properties to my form, I have the ability to open a calendar but I have no way of knowing if the date is activate or not.
I saw in another post, that a ticket was opened to added the material selection to the options in forms. Could this functionality be added as well?
Can you have dropdowns in an ilogic FORM? For example I want to setup 5 choices for a custom iproperty. Then when I run the form I can pick from those 5 choices only? Please click "Accept as Solution" if this response answers your question.
i want to use pictures with my forms and was wondering if i can use them like the way i showed in attached image.
the CaseA image is the one i can currently use and CaseB is the way i want to use. My reason to do this is, i have alot of parameters to change and having both the picture and a menu below/above takes alot of space which also seems redundant.
Is there anyway to reference a form and its specific items in iLogic. For example, say I wanted to change a label on the form when the code ran. How would I do something like this?
I have a VBA form coded that we use to generate part numbers and descriptions that then populate the iProperties. We often use the part sizes in the description. I would like to be able to put a button on the form that allows users to use the "Measure Distance" tool so that they can measure the part while they are creating the description.
Any code that I could use to activate the "measure" tool while a vba form is active?
I would like to know if it is possible to make a form with multiple forms, depending on the selection a could build a rectangle, or a cilynder or a cone.
I have a form used to select from pre-defined settings (case statements in the rule) and custom entry.
I have a drop down that provides the selections from the pre-defined stuff or custom with fields that show the results.
If custom is selected the user is prompted to enter data in popup dialog boxes which all works fine but I would rather select custom and enter the data in the fields on the form than in the popup. can that be done?
See the png files
I want to just enter the data in without the popup box
I have one particular file which will not allow me to add an iLogic form. When I select "Add Form" it does nothing. This only happens in this one file. I can open other files in the same session and they work fine. I can add iLogic rules to this file but I can't create forms.
I would like to split my form vertically. I have a number fo fields that are used to select options in my system. The fields span the width of the form which due to graphics used is fairly wide. I would like to add a discription field in line with and next to my selections.
I am trying to get the rectangle pattern to form 8 blades of the same shape and height across the barrel.A picture shows how the height is lost within the barrel..The only blade which is the same height is the 2 outside blades
Is the rectangle the right tool to produce the result?
